SIST EN 10016-1:1997

Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements

1.1 This European Standard is applicable to rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section of the rod may be round, square, rectangular, hexagonal, half-round or another shape and as a general rule of nominal size 5 mm or above (see EURONORM 17) : the surface is smooth.  1.2 It is not applicable to following products for which standards exist or are under study such as :  - steel rod intended for heat treatment (see EN 10083 and EURONORM 84, 85 and 86) ; - rod of free-cutting steels (see EURONORM 87) ; - steel rod for cold heading and cold extrusion (see EURONORM 119) ; - steel rod intended for the production of electrodes and products for welding (see EURONORM 133) ; - steel rod for welded fabric for reinforcement for concrete (see prENV 10080) ; - steel rod for wire for high fatique stength mechanical springs, such as valve springs.  1.3 In addition to the requirements of this standards the general technical delivery requirements specified in EN 10021 apply.

Walzdraht aus unlegiertem Stahl zum Ziehen und/oder Kaltwalzen - Teil 1: Allgemeine Anforderungen

Diese europäische Norm gilt für Walzdraht aus unlegiertem Stahl zum Ziehen und/oder Kaltwalzen. Der Querschnitt des Walzdrahtes ist rund, vierkant, rechteckig, sechskant, halbrund oder von anderer Form und sein Nennmaß beträgt im allgemeinen >= 5 mm (siehe Euronorm 17); seine Oberfläche ist glatt.

Fil machine en acier non-allié destiné au tréfilage et/ou au laminage a froid - Partie 1: Prescriptions générales

La présente norme européenne s'applique au fil-machine en acier non allié destiné au tréfilage et/ou au laminage a froid. La section droite du fil-mechine peut etre circulaire, carrée, rectangulaire, hexagonale, demi-ronde ou autre et en regle générale de dimension nominale supérieure ou égale a 5 mm (voir Euronorm 17); la surface est lisse.

Vroče valjana žica iz nelegiranega jekla za vlečenje in/ali hladno valjanje - 1. del: Splošne zahteve

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-1997
• Withdrawal Date: 04-Sep-2011
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 05-Sep-2011
• Due Date: 28-Sep-2011
• Completion Date: 05-Sep-2011
• Directive: 89/106/EEC - Construction products
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
• Mandate: M/BC/CEN/89/10 - ECISS - 3rd programme
• Ref Project: EN 10016-1:1994 - Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements

Relations

• Replaced By: SIST EN ISO 16120-1:2011 - Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2011)
• Effective Date: 01-Oct-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Walzdraht aus unlegiertem Stahl zum Ziehen und/oder Kaltwalzen - Teil 1: Allgemeine AnforderungenFil machine en acier non-allié destiné au tréfilage et/ou au laminage a froid - Partie 1: Prescriptions généralesNon-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and l
...