SIST EN IEC 60730-2-14:2019/A2:2022

Automatic electrical controls - Part 2-14: Particular requirements for electric actuators

Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen - Teil 2-14: Besondere Anforderungen an elektrische Stellantriebe

Dispositifs de commande électrique automatiques – Partie 2-14: Exigences particulières pour les actionneurs électriques

Avtomatske električne krmilne naprave - 2-14. del: Posebne zahteve za električna prožila - Dopolnilo A2

General Information

• Status: Published
• Publication Date: 18-Jan-2022
• ICS: 29.100.01 - Components for electrical equipment in general
• ICS: 97.120 - Automatic controls for household use
• Technical Committee: ISS EIT.NZG - Household apliances
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Jan-2022
• Due Date: 10-Mar-2022
• Completion Date: 19-Jan-2022
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Mandate: M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
• Ref Project: EN IEC 60730-2-14:2019/A2:2021 - Automatic electrical controls - Part 2-14: Particular requirements for electric actuators

Relations

• Replaced By: SIST EN IEC 60730-2-14:2025 - Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
• Effective Date: 01-Sep-2025
• Amends: SIST EN IEC 60730-2-14:2019 - Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
• Effective Date: 13-Oct-2020

Overview

EN IEC 60730-2-14:2019/A2:2021 (adopted as EN IEC 60730-2-14:2019/A2:2022 in some national bodies) is an amendment to the Part 2‑14 requirements of IEC 60730 for automatic electrical controls. It gives particular requirements for electric actuators used in household and building automation applications. This amendment clarifies scope, test methods and limits, and adds/updates normative references. It is intended to be used in conjunction with IEC 60730‑1.

Key topics and technical requirements

• Scope and application
  • Applies to electric actuators for building automation (within ISO 16484), including AC and DC actuators with rated voltage up to 690 V AC or 600 V DC.
  • Covers inherent safety, operating values, operating times/sequences associated with equipment safety, and testing.
  • Also applicable to the functional safety of low‑complexity safety‑related systems and controls.
• Types of actuators covered
  • Actuators responsive to temperature, pressure, time, humidity, light, flow, liquid level, current/voltage, acceleration, electrostatic effects, and combinations.
• Testing and abnormal operation
  • Blocked mechanical output (abnormal temperature) test: actuators with motor insulation for protection against electric shock must withstand blocked output without exceeding temperatures specified in the standard (Table 26). Motors with only functional insulation may exceed those temperatures during the test provided post‑test compliance with specified requirements.
  • Running overload: winding temperature limits are specified by insulation class. Examples given in the amendment:
    • Class 105 (A): 140 °C
    • Class 120 (E): 155 °C
    • Class 130 (B): 165 °C
    • Class 155 (F): 180 °C
    • Class 180 (H): 200 °C
    • Class 200 (N): 220 °C
    • Class 220 (R): 240 °C
    • Class 250: 270 °C
• Information and marking
  • Requirements for information supplied with the actuator (e.g., maximum mounting surface temperature where it differs by >20 K).
  • Class II construction marking guidance when a cord without a plug is used.
• EMC / electronic controls
  • Annex H defines electromagnetic compatibility (EMC) immunity test requirements and related compliance wording adjustments.
• Normative references
  • Adds IEC 61058‑1‑1 for mechanical switch requirements.

Applications and who uses it

• Manufacturers of electric actuators (HVAC dampers, valves, building services)
• Product design and compliance engineers ensuring safety and functional performance
• Test laboratories and certification bodies performing type-testing and EMC/thermal tests
• System integrators and building automation specifiers selecting compliant actuators
• Regulators and conformity assessors applying EN/IEC standards in national markets

Related standards

• IEC 60730‑1 (general requirements for automatic electrical controls) - to be used together with Part 2‑14
• IEC 61058‑1 and IEC 61058‑1‑1 (switches for appliances) - referenced for manual switches not integral to actuators

Keywords: EN IEC 60730-2-14, automatic electrical controls, electric actuators, building automation, actuator testing, functional safety, EMC immunity, running overload, blocked output test.

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2022
Avtomatske električne krmilne naprave - 2-14. del: Posebne zahteve za električna
prožila - Dopolnilo A2
Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche
Anwendungen - Teil 2-14: Besondere Anforderungen an elektrische Stellantriebe
Dispositifs de commande électrique automatiques – Partie 2-14: Exigences particulières
pour les actionneurs électriques
Ta slovenski standard je istoveten z: EN IEC 60730-2-14:2019/A2:2021
ICS:
29.100.01 Sestavni deli za električne Components for electrical
naprave na splošno equipment in general
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60730-2-14:2019/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 29.120.01; 97.120
English Version
Automatic electrical controls - Part 2-14: Particular requirements
for electric actuators
(IEC 60730-2-14:2017/AMD2:2021)
Dispositifs de commande électrique automatiques - Partie Automatische elektrische Regel- und Steuergeräte für den
2-14: Exigences particulières pour les actionneurs Hausgebrauch und ähnliche Anwendungen - Teil 2-14:
électriques Besondere Anforderungen an elektrische Stellantriebe
(IEC 60730-2-14:2017/AMD2:2021) (IEC 60730-2-14:2017/AMD2:2021)
This amendment A2 modifies the European Standard EN IEC 60730-2-14:2019; it was approved by CENELEC on 2021-11-26. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60730-2-14:2019/A2:2021 E

European foreword
The text of document 72/1284/FDIS, future IEC 60730-2-14/AMD2, prepared by IEC/TC 72 “Automatic
electrical controls” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–08–26
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–11–26
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60730-2-14:2017/AMD2:2021 was approved by CENELEC
as a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Annex ZA of EN 60730-1:2016 applies with the following change:
Add the following reference:
Publication Year Title EN/HD Year
IEC 61058-1-1 - Switches for appliances – Part 1–1: EN 61058-1-1 -
Requirements for mechanical switches

IEC 60730-2-14 ®
Edition 2.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Automatic electrical controls –

Part 2-14: Particular requirements for electric actuators

Dispositifs de commande électrique automatiques –

Partie 2-14: Exigences particulières pour les actionneurs électriques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.01; 97.120 ISBN 978-2-8322-1032-5

– 2 – IEC 60730-2-14:2017/AMD2:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AUTOMATIC ELECTRICAL CONTROLS –

Part 2-14: Particular requirements for electric actuators

AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by inde
...