SIST EN IEC 61139-3:2024
(Main)Industrial networks - Single-drop digital communication interface - Part 3: Wireless extensions (IEC 61139-3:2023)
Industrial networks - Single-drop digital communication interface - Part 3: Wireless extensions (IEC 61139-3:2023)
IEC 61139-3:2023 specifies a wireless single-drop digital communication interface (SDCI wireless).
This is an extension to the single-drop digital communication interface (SDCI) technology that is specified in IEC 61131-9.
This document specifies the wireless communication services and protocol (physical layer, data link layer and application layer in accordance with the ISO/OSI reference model) for W‑Masters and W‑Devices.
NOTE This document does not cover the integration into higher level systems such as fieldbuses.
Industrielle Netzwerke - Digitale Single-Drop-Kommunikationsschnittstelle - Teil 3: Drahtlose Erweiterungen (IEC 61139-3:2023)
Réseaux industriels - Interface de communication numérique point à point - Partie 3: Extensions sans fil (IEC 61139-3:2023)
L’IEC 61139:2023 spécifie une interface de communication numérique point à point sans fil (SDCI sans fil).
Il s’agit d’une extension de la technologie d’interface de communication numérique point à point (SDCI) qui est spécifiée dans l’IEC 61131-9.
Le présent document spécifie les services et le protocole de communication sans fil (couche physique, couche de liaison de données et couche d’application conformément au modèle de référence ISO/OSI) pour les Maîtres sans fil et les Appareils sans fil.
NOTE Le présent document ne couvre pas l’intégration dans des systèmes de niveau supérieur tels que les bus de terrain.
Industrijska omrežja - Enožični digitalni komunikacijski vmesnik - 3. del: Brezžične razširitve (IEC 61139-3:2023)
Standard IEC 61139-3:2023 določa brezžični enožični digitalni komunikacijski vmesnik (brezžični SDCI).
To je razširitev tehnologije enožičnega digitalnega komunikacijskega vmesnika, ki je določena v standardu IEC 61131-9.
Ta dokument določa brezžične komunikacijske storitve in protokol (fizično plast, plast podatkovnih povezav in aplikacijsko plast v skladu z referenčnim modelom ISO/OSI) za W‑Masters in W‑Devices.
OPOMBA: Ta dokument ne zajema integracije v sisteme višje ravni, kot so področna vodila.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61139-3:2024
01-april-2024
Industrijska omrežja - Enožični digitalni komunikacijski vmesnik - 3. del: Brezžične
razširitve (IEC 61139-3:2023)
Industrial networks - Single-drop digital communication interface - Part 3: Wireless
extensions (IEC 61139-3:2023)
Industrielle Netzwerke - Digitale Single-Drop-Kommunikationsschnittstelle - Teil 3:
Drahtlose Erweiterungen (IEC 61139-3:2023)
Réseaux industriels - Interface de communication numérique point à point - Partie 3:
Extensions sans fil (IEC 61139-3:2023)
Ta slovenski standard je istoveten z: EN IEC 61139-3:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.110 Omreževanje Networking
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN IEC 61139-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61139-3:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 61139-3:2024
EUROPEAN STANDARD EN IEC 61139-3
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2023
ICS 35.200
English Version
Industrial networks - Single-drop digital communication interface
- Part 3: Wireless extensions
(IEC 61139-3:2023)
Réseaux industriels - Interface de communication Industrielle Netzwerke - Digitale Single-Drop-
numérique point à point - Partie 3: Extensions sans fil Kommunikationsschnittstelle - Teil 3: Drahtlose
(IEC 61139-3:2023) Erweiterungen
(IEC 61139-3:2023)
This European Standard was approved by CENELEC on 2023-12-06. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61139-3:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61139-3:2024
EN IEC 61139-3:2023 (E)
European foreword
The text of document 65C/1268/FDIS, future edition 1 of IEC 61139-3, prepared by SC 65C "Industrial
networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61139-3:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-06
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-06
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61139-3:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61139 (series) NOTE Approved as EN IEC 61139 (series)
IEC 61375-1 NOTE Approved as EN 61375-1
IEC/TR 62453-61 NOTE Approved as CLC/TR 62453-61
2
---------------------- Page: 4 ----------------------
SIST EN IEC 61139-3:2024
EN IEC 61139-3:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.