SIST EN 3489:2020

Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 ≤ Rm ≤ 750 MPa - Tubes for structures - 0,5 ≤ a ≤ 5 mm

This document specifies the requirements relating to: Steel X8CrNiTi18-10 (1.4878/1.4544) Softened 500 ≤ Rm ≤ 750 MPa Tubes for structures 0,5 ≤ a ≤ 5 mm for aerospace applications. ASD-STAN designation: FE-PA13.

Luft- und Raumfahrt - Stahl X8CrNiTi18-10 (1.4878/1.4544) - Weichgeglüht - 500 ≤ Rm ≤ 750 MPa - Konstruktionsrohe - 0,5 ≤ a ≤ 5 mm

Dieses Dokument legt die Anforderungen an:
Stahl X8CrNiTi18-10 (1.4878/1.4544)
weichgeglüht
500 ≤ Rm ≤ 750 MPa
Konstruktionsrohre
0,5 ≤ a ≤ 5 mm
für Anwendungen in der Luft  und Raumfahrt fest.
ASD-STAN-Bezeichnung: FE-PA13.

Série aérospatiale - Acier X8CrNiTi18-10 (1.4878/1.4544) - Adouci - 500 ≤ Rm ≤ 750 MPa - Tubes pour structures - 0,5 ≤ a ≤ 5 mm

This document specifies the requirements relating to:
Steel FE-PA13
Softened
500 ≤ Rm ≤ 750 MPa
Tubes for structures
0,5 ≤ a ≤ 5 mm
for aerospace applications.

Aeronavtika - Jeklo X8CrNiTi18-10 (1.4878/1.4544) - Popuščano - 500 ≤ Rm ≤ 750 MPa - Cevi za konstrukcije - 0,5 ≤ a ≤ 5 mm

Ta dokument določa zahteve, ki se navezujejo na: jeklo X8CrNiTi18-10 (1.4878/1.4544), popuščano 500 ≤ Rm ≤ 750 MPa, cevi za konstrukcije 0,5 ≤ a ≤ 5 mm, za uporabo v aeronavtiki. Oznaka ASD-STAN: FE-PA13.               
SIST EN 4604-007:2020   SIST EN 4604-007:2008

General Information

• Status: Published
• Publication Date: 22-Dec-2019
• ICS: 49.025.10 - Steels
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 12-Dec-2019
• Due Date: 16-Feb-2020
• Completion Date: 23-Dec-2019
• Ref Project: EN 3489:2019 - Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 ≤ Rm ≤ 750 MPa - Tubes for structures - 0,5 ≤ a ≤ 5 mm

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3489:2020
01-februar-2020
Aeronavtika - Jeklo X8CrNiTi18-10 (1.4878/1.4544) - Popuščano - 500 ≤ Rm ≤ 750
MPa - Cevi za konstrukcije - 0,5 ≤ a ≤ 5 mm
Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) - Softened - 500 ≤ Rm ≤ 750
MPa - Tubes for structures - 0,5 ≤ a ≤ 5 mm
Luft- und Raumfahrt - Stahl X8CrNiTi18-10 (1.4878/1.4544) - Weichgeglüht - 500 ≤ Rm ≤
750 MPa - Konstruktionsrohe - 0,5 ≤ a ≤ 5 mm
Série aérospatiale - Acier X8CrNiTi18-10 (1.4878/1.4544) - Adouci - 500 ≤ Rm ≤ 750
MPa - Tubes pour structures - 0,5 ≤ a ≤ 5 mm
Ta slovenski standard je istoveten z: EN 3489:2019
ICS:
49.025.10 Jekla Steels
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 3489:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3489:2020

---------------------- Page: 2 ----------------------
SIST EN 3489:2020


EN 3489
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2019
EUROPÄISCHE NORM
ICS 49.025.10
English Version

Aerospace series - Steel X8CrNiTi18-10 (1.4878/1.4544) -
Softened - 500 ≤ Rm ≤ 750 MPa - Tubes for structures - 0,5
≤ a ≤ 5 mm
S?ie a?ospatiale - Acier X8CrNiTi18-10 Luft- und Raumfahrt - Stahl X8CrNiTi18-10
(1.4878/1.4544) - Adouci - 500 ≤ Rm ≤ 750 MPa - (1.4878/1.4544) - Weichgegl?t - 500 ≤ Rm ≤ 750 MPa -
Tubes pour structures - 0,5 ≤ a ≤ 5 mm Konstruktionsrohe - 0,5 ≤ a ≤ 5 mm
This European Standard was approved by CEN on 22 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3489:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3489:2020
EN 3489:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 8

2

---------------------- Page: 4 ----------------------
SIST EN 3489:2020
EN 3489:2019 (E)
European foreword
This document (EN 3489:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorse
...