iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 545:1998

(Main)

Ductile iron, pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods

Ductile iron, pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods

This European standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for theconstruction of pipelines: - to convey water (e.g. potable water), - with or without pressure, - to be installed below or above ground.

Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für Wasserleitungen - Anforderungen und Prüfverfahren

Diese europäische Norm legt die Anforderungen und die diesbezüglichen Prüfverfahren fest, die auf duktile Gussrohre, Formstücke, Zubehörteile und ihre Verbindungen anwendbar sind zur Errichtung von Rohrleitungen: - zum Transport von Wasser (z.B. Trinkwasser); - mit oder ohne Innendruck; - oberirdisch oder erdverlegt.

Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour canalisations d'eau - Prescriptions et méthodes d'essai

La présente norme européenne prescrit les exigences et les méthodes d'essai associées applicables aux tuyaux, raccords et accessoires en fonte ductile et à leurs assemblages, destinés à la construction de canalisations: - pour transporter de l'eau (par exemple de l'eau potable), - avec ou sans pression, - installées dans le sol ou en aérien.

Cevi, fitingi in dodatki iz duktilne litine za vodovod - Zahteve in postopki preskušanja

General Information

Status
Withdrawn
Publication Date
30-Sep-1998
Withdrawal Date
31-Oct-2002
ICS
23.040.10 - Iron and steel pipes
23.040.40 - Metal fittings
91.140.60 - Water supply systems
Technical Committee
TLP - Pressure vessels
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Nov-2002
Due Date
01-Nov-2002
Completion Date
01-Nov-2002
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/136 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on construction products in contact with water intended for human consumption
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
EN 545:1994 - Ductile iron, pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods

Relations

Replaced By
SIST EN 545:2002 - Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
Effective Date
01-Nov-2002

Buy Standard

EN 545:1998EN 545:1998
PreviousNext
Standard
EN 545:1998
English language
95 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-1998
Cevi, fitingi in dodatki iz duktilne litine za vodovod - Zahteve in postopki
preskušanja
Ductile iron, pipes, fittings, accessories and their joints for water pipelines -
Requirements and test methods
Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für
Wasserleitungen - Anforderungen und Prüfverfahren
Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour
canalisations d'eau - Prescriptions et méthodes d'essai
Ta slovenski standard je istoveten z: EN 545:1994
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
23.040.40 Kovinski fitingi Metal fittings
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 545:19
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 545:2011(Main)
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 545:2010

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines outside buildings:
-   to convey different types of water (e.g. raw water, treated water, re-used water) for all types of applications (e.g. water intended for human consumption, for fire protection, for snow making, for irrigation, for hydro-electricity etc.);
-   with or without pressure;
-   to be installed below or above ground.
This European Standard is applicable to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   supplied externally and internally coated;
-               suitable for fluid temperatures between 0 °C and 50 °C, excluding frost;
-   not intended for use in areas subject to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes and fittings cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints and accessories, in a size range extending from DN 40 to DN 2 000, inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this standard.
In addition, reference is made to the performance requirements of couplings, flange adaptors and saddles manufactured for use with ductile iron pipes and fittings.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard + National Annex and/or Foreword
    96 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 15545:2007(Main)
Guide to the use of EN 545
CEN/TR 15545:2006

EN 545 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines:
   to convey water (e.g. potable water);
   with or without pressure;
   to be installed below or above ground.
In respect to potential adverse effects on the quality of water intended for human consumption, caused by the product covered by this standard:
   this standard provides no information as to whether the product may be used without restriction in any of the member states of the EU or EFTA;
   it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force.
This technical report:
   provides details on the current national regulations concerning the quality of water intended for human consumption;
   explains in more detail the process of testing for the performance tests;
   explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
   explains in more detail the ways of certification of conformity with EN 545  for a reliable evaluation of the performance of the products.
In order to make the use of this Technical Report easier, the clauses of this document refer to the corresponding clause numbers in EN 545.
The current national regulations concern the quality of water intended for human consumption.  
A comprehensive potability regulation means:
   regulatory obligation ( i.e. : decree, law….);
   technical specifications;
   tests methods to verify the compliance with the technical specifications;
   directory of approved laboratories able to carry out these tests.
On October the 1st 2005, there is a national regulation in the following countries: Austria, France, Germany, Italy, Netherlands, Switzerland and United Kingdom.

  • Technical report
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 545:2008(Main)
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
prEN 545

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines: - to convey water (e. g. for drinking water pipelines, fire protection, snow guns, irrigation, hydroelectric, reused water pipelines, etc…) - with or without pressure ; - to be installed below or above ground. This standard is applicable to pipes, fittings and accessories which are : - manufactured with socketed, flanged or spigot ends; - normally delivered externally and internally coated ; - suitable for fluid temperatures between 0 °C and 50 °C, excluding frost. This standard covers pipes, fittings ast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints and accessories, in a size range extending from DN 40 to DN 2 000, inclusive. This standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this standard. In addition reference is made to the performance requirements of couplings, flange adaptors and saddles manufactured only for use with ductile iron pipes and fittings NOTE In this standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Draft
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 545:2011(Main)
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 545:2010

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines outside buildings:
-   to convey different types of water (e.g. raw water, treated water, re-used water) for all types of applications (e.g. water intended for human consumption, for fire protection, for snow making, for irrigation, for hydro-electricity etc.);
-   with or without pressure;
-   to be installed below or above ground.
This European Standard is applicable to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   supplied externally and internally coated;
-               suitable for fluid temperatures between 0 °C and 50 °C, excluding frost;
-   not intended for use in areas subject to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes and fittings cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints and accessories, in a size range extending from DN 40 to DN 2 000, inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this standard.
In addition, reference is made to the performance requirements of couplings, flange adaptors and saddles manufactured for use with ductile iron pipes and fittings.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard + National Annex and/or Foreword
    96 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 15545:2007(Main)
Guide to the use of EN 545
CEN/TR 15545:2006

EN 545 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines:
   to convey water (e.g. potable water);
   with or without pressure;
   to be installed below or above ground.
In respect to potential adverse effects on the quality of water intended for human consumption, caused by the product covered by this standard:
   this standard provides no information as to whether the product may be used without restriction in any of the member states of the EU or EFTA;
   it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force.
This technical report:
   provides details on the current national regulations concerning the quality of water intended for human consumption;
   explains in more detail the process of testing for the performance tests;
   explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
   explains in more detail the ways of certification of conformity with EN 545  for a reliable evaluation of the performance of the products.
In order to make the use of this Technical Report easier, the clauses of this document refer to the corresponding clause numbers in EN 545.
The current national regulations concern the quality of water intended for human consumption.  
A comprehensive potability regulation means:
   regulatory obligation ( i.e. : decree, law….);
   technical specifications;
   tests methods to verify the compliance with the technical specifications;
   directory of approved laboratories able to carry out these tests.
On October the 1st 2005, there is a national regulation in the following countries: Austria, France, Germany, Italy, Netherlands, Switzerland and United Kingdom.

  • Technical report
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 545:2008(Main)
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
prEN 545

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines: - to convey water (e. g. for drinking water pipelines, fire protection, snow guns, irrigation, hydroelectric, reused water pipelines, etc…) - with or without pressure ; - to be installed below or above ground. This standard is applicable to pipes, fittings and accessories which are : - manufactured with socketed, flanged or spigot ends; - normally delivered externally and internally coated ; - suitable for fluid temperatures between 0 °C and 50 °C, excluding frost. This standard covers pipes, fittings ast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints and accessories, in a size range extending from DN 40 to DN 2 000, inclusive. This standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this standard. In addition reference is made to the performance requirements of couplings, flange adaptors and saddles manufactured only for use with ductile iron pipes and fittings NOTE In this standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Draft
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 488-2:2025(Main)
District heating and district cooling pipes - Bonded pipe systems for directly buried hot and cold water networks - Factory made steel valve assembly for draining and venting, polyurethane thermal insulation and a casing of polyethylene
EN 488-2:2025

This document specifies requirements for factory made thermally insulated bonded steel service valve assemblies for filling, draining, venting and operation purposes for directly buried hot and cold water networks in accordance with EN 13941-1, comprising a steel service valve, steel service pipe, polyurethane (PUR) foam thermal insulation and a casing of polyethylene (PE).
This document applies of steel service valve assemblies with an internal pressure of maximum 2,5 MPa.
The principles of this document can be applied to thermal insulated bonded steel service valve assemblies with internal pressures higher than 2,5 MPa, provided that special attention is paid to the effects of pressure.
The steel service valve assembly can also include the following additional elements: measuring wires, spacers, and diffusion barriers.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15698-2:2025(Main)
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
EN 15698-2:2025

This document specifies requirements and test methods for fitting and steel valve assemblies of factory made thermally insulated bonded twin pipe assemblies for hot water networks in accordance with EN 13941-1, comprising two steel service pipes, in most cases steel fittings and/or steel valves, steel components, polyurethane (PUR) foam thermal insulation and one casing of polyethylene.
NOTE   Steel components can be e.g. fixing bars.
The twin pipe assembly can also include the following additional elements: measuring wires, spacers and diffusion barriers.
This document covers the following assemblies:
-   fittings: bends, T-pieces and reducers;
-   valves for main line.
This document applies to fitting assemblies with an internal pressure of at least 1,6 MPa and steel valve assemblies with a maximum internal pressure of 2,5 MPa.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-8:2025(Main)
Safety of packaging machines - Part 8: Strapping machines
EN 415-8:2025

This document is applicable to the following groups of machines:
-   powered hand strapping tools;
-   semi-automatic strapping machines;
-   automatic strapping machines.
This document does not apply to:
-   strapping tools, where the strap tension is only applied by manual effort;
-   machines, intended for use with paper strap;
-   hand-held motor-operated electric strapping tools.
NOTE   For hand-held motor-operated electric strapping tools see EN 60745-2-18:2009 and EN 62841-1:2015.
This document deals with safety requirements for machine design, transport, installation, commissioning, operation, adjustment, maintenance and cleaning. The extent to which hazards, hazardous situations and events are covered is indicated in Annex A.
This document does not consider the following hazards:
-   the use of strapping machines in potentially explosive atmosphere;
-   the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject;
-   hazards that are associated with decommissioning strapping machines.
Hazards associated with decommissioning of strapping machines are not considered and therefore excluded but are generally part of the instruction manual (see Clause 6), together with suited measures, if necessary.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3155-009:2025(Main)
Aerospace Series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
EN 3155-009:2025

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-008.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day