kSIST-TP FprCEN/TR 1404:2023
(Main)Determination of emissions from appliances burning gaseous fuel during tape-testing
Determination of emissions from appliances burning gaseous fuel during tape-testing
This project describes test methods and automatic measuring equipment for the determination of NOx(NO+NO2) CO, CO2 and O2 emissions in the flue gases including the sampling system and the calibration gases. the document should be introduced in the relevant gas appliances TC.
Bestimmung von Emissionen von Gasgeräten während der Typprüfung
Determination of emissions from appliances burning gaseous fuel during tape-testing
Določanje emisij iz plinskih aparatov pri tipskem preskušanju
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
kSIST-TP FprCEN/TR 1404:2023
01-december-2023
Določanje emisij iz plinskih aparatov pri tipskem preskušanju
Determination of emissions from appliances burning gaseous fuel during tape-testing
Bestimmung von Emissionen von Gasgeräten während der Typprüfung
Determination of emissions from appliances burning gaseous fuel during tape-testing
Ta slovenski standard je istoveten z: FprCEN/TR 1404
ICS:
13.040.40 Emisije nepremičnih virov Stationary source emissions
27.060.20 Plinski gorilniki Gas fuel burners
kSIST-TP FprCEN/TR 1404:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST-TP FprCEN/TR 1404:2023
---------------------- Page: 2 ----------------------
kSIST-TP FprCEN/TR 1404:2023
FINAL DRAFT
TECHNICAL REPORT
FprCEN/TR 1404
RAPPORT TECHNIQUE
TECHNISCHER REPORT
September 2023
ICS 97.040.20; 13.040.40 Will supersede CR 1404:1994
English Version
Test gases - Determination of emissions from appliances
burning gaseous fuels during type-testing
Determination of emissions from appliances burning Bestimmung von Emissionen von Gasgeräten während
gaseous fuel during tape-testing der Typprüfung
This draft Technical Report is submitted to CEN members for Vote. It has been drawn up by the Technical Committee CEN/TC
238.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a Technical Report.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TR 1404:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST-TP FprCEN/TR 1404:2023
FprCEN/TR 1404:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Symbols and abbreviations . 8
4 Parameters impacting the uncertainty of the measurements . 8
4.1 General. 8
4.2 Calculation of individual sources of uncertainties . 8
4.3 Total systematic error. 9
4.4 Reproducibility / repeatability of the CO and NO emissions . 9
X
4.5 Warming up . 9
4.6 Response time . 11
4.7 Setting of zero . 11
4.8 Repeatability .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.