SIST EN 2584:2019
(Main)Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads
This document specifies the characteristics of spherical plain bearings in corrosion resisting steel, with self lubricating liner, narrow series, for elevated load. at ambient temperature, with or without swaging groove, intended for use in the fixed or moving parts of the aircraft structure and control mechanisms.
They shall be used in the temperature range −55 °C to +163 °C.
Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung - Schmale Reihe - Hohe Belastung bei Raumtemperatur - Maße und Belastungen
Série aérospatiale - Rotules en acier résistant à la corrosion à garniture autolubrifiante - Série étroite - Charge élevée à température ambiante - Dimensions et charges
Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo - Ozki tip - Serija za večje obremenitve pri okoljski temperaturi - Mere in nosilnosti
Ta dokument določa lastnosti ozkih tipov kroglastih drsnih ležajev iz korozijsko odpornega jekla s samomazalno oblogo za večje obremenitve pri okoljski temperaturi, z zakovanim utorom ali brez njega, ki so namenjeni za uporabo v fiksnih ali premikajočih se delih ogrodja letala in nadzornih mehanizmih.
Uporabljati jih je treba v temperaturnem razponu –55 °C do 163 °C.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2584:2019
01-maj-2019
1DGRPHãþD
SIST EN 2023:2001
SIST EN 2023:2001/AC1:2001
SIST EN 2584:2004
$HURQDYWLND.URJODVWLGUVQLOHåDMLL]NRUR]LMVNRRGSRUQHJDMHNODVVDPRPD]DOQR
REORJR2]NLWLS6HULMD]DYHþMHREUHPHQLWYHSULRNROMVNLWHPSHUDWXUL0HUHLQ
QRVLOQRVWL
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-
lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and
loads
Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit
selbstschmierender Beschichtung - Schmale Reihe - Hohe Belastung bei
Raumtemperatur - Maße und Belastungen
Série aérospatiale - Rotules en acier résistant à la corrosion à garniture autolubrifiante -
Série étroite - Charge élevée à température ambiante - Dimensions et charges
Ta slovenski standard je istoveten z: EN 2584:2019
ICS:
21.100.10 Drsni ležaji Plain bearings
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
SIST EN 2584:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 2584:2019
---------------------- Page: 2 ----------------------
SIST EN 2584:2019
EN 2584
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2019
EUROPÄISCHE NORM
ICS 49.035 Supersedes EN 2023:1988, EN 2584:2001
English Version
Aerospace series - Bearings, spherical plain in corrosion
resisting steel with self-lubricating liner - Narrow series -
Elevated load at ambient temperature - Dimensions and
loads
Série aérospatiale - Rotules en acier résistant à la Luft- und Raumfahrt - Gelenklager aus
corrosion à garniture autolubrifiante - Série étroite - korrosionsbeständigem Stahl mit selbstschmierender
Charge élevée à température ambiante - Dimensions et Beschichtung - Schmale Reihe - Hohe Belastung bei
charges Raumtemperatur - Maße und Belastungen
This European Standard was approved by CEN on 13 August 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2584:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2584:2019
EN 2584:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Symbols and abbreviations . 4
4 Required characteristics . 5
4.1 Configuration, dimensions, tolerances and mass . 5
4.2 Surface roughness . 5
4.3 Loads and starting torques . 8
4.4 Materials . 8
4.5 Surface treatment on the inner ring solely . 8
5 Designation. 9
6 Marking . 9
7 Technical specification . 9
8 Quality management system . 10
Annex A (informative) Standard evolution form . 11
Bibliography . 12
2
---------------------- Page: 4 ----------------------
SIST EN 2584:2019
EN 2584:2019 (E)
European foreword
This document (EN 2584:2019) has been prepared by the Aerospace and Defence Industries Asso-
ciation of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an i-
dentical text or by endorsement, at the latest by August 2019, and conflicting national standards shall
be withdrawn at the latest by August 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2584:2001 and EN 2023:1988.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the follo-
wing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.