SIST EN 12081:2008/kFprA1:2010
(Amendment)Railway applications - Axleboxes - Lubricating greases
Railway applications - Axleboxes - Lubricating greases
This European Standard specifies the quality requirements of greases intended for the lubrication of axlebox rolling bearings according to EN 12080, required for reliable operation of trains on European networks. It covers the approval procedure, the method of quality control and quality monitoring of the grease. The grease requirements are given for two speed classes.
Bahnanwendungen - Radsatzlager - Schmierfette
Applications ferroviaires - Boîtes d'essieux - Graisses pour lubrification
Železniške naprave - Ohišja ležajev kolesnih dvojic - Maziva - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12081:2008/kFprA1:2010
01-julij-2010
Železniške naprave - Ohišja ležajev kolesnih dvojic - Maziva - Dopolnilo A1
Railway applications - Axleboxes - Lubricating greases
Bahnanwendungen - Radsatzlager - Schmierfette
Applications ferroviaires - Boîtes d'essieux - Graisses pour lubrification
Ta slovenski standard je istoveten z: EN 12081:2007/FprA1
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
75.100 Maziva Lubricants, industrial oils and
related products
SIST EN 12081:2008/kFprA1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12081:2008/kFprA1:2010
---------------------- Page: 2 ----------------------
SIST EN 12081:2008/kFprA1:2010
EUROPEAN STANDARD
FINAL DRAFT
EN 12081:2007
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2010
ICS 75.100
English Version
Railway applications - Axleboxes - Lubricating greases
Applications ferroviaires - Boîtes d'essieux - Graisses pour Bahnanwendungen - Radsatzlager - Schmierfette
lubrification
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 12081:2007. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12081:2007/FprA1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12081:2008/kFprA1:2010
EN 12081:2007/FprA1:2010 (E)
Contents Page
Foreword .3
1 Modification to the Foreword .4
2 Modification to Annex ZA, Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU Directive 2008/57/EC.5
2
---------------------- Page: 4 ----------------------
SIST EN 12081:2008/kFprA1:2010
EN 12081:2007/FprA1:2010 (E)
Foreword
This document (EN 12081:2007/FprA1:2010) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
3
---------------------- Page: 5 ----------------------
SIST EN 12081:2008/kFprA1:2010
EN 12081:2007/FprA1:2010 (E)
1 Modification to the Foreword
Replace the fourth paragraph with the following new one:
"This document has been prepared under a mandate given to CEN/CENELEC/ETSI by the European
Commission and the European Free Trade Association, and supp
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.