Basic principles for graphical symbols for use on equipment -- Part 2: Form and use of arrows

Principes de base pour les symboles graphiques utilisables sur le matériel -- Partie 2: Forme et utilisation des flèches

L'ISO 80416-2 établit les principes de base et les proportions qui s'appliquent aux flèches indiquant différents éléments, forces, fonctions ou dimensions. Les flèches définies dans l'ISO 80416-2 sont utilisées comme symboles graphiques ou éléments de symboles graphiques. Lorsque de nouveaux symboles graphiques sont créés ou que des symboles graphiques existants sont révisés, les principes établis dans l'ISO 80416-2 sont applicables.

Osnovna načela grafičnih simbolov za rabo na opremi - 2. del: Oblika in uporaba puščic

General Information

Status
Published
Publication Date
31-Jan-2002
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2002
Due Date
01-Feb-2002
Completion Date
01-Feb-2002

Relations

Buy Standard

Standard
ISO 80416-2:2001 - Basic principles for graphical symbols for use on equipment
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 80416-2:2002
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 80416-2:2001 - Principes de base pour les symboles graphiques utilisables sur le matériel
French language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 80416-2
First edition
2001-07-15
Basic principles for graphical symbols for
use on equipment —
Part 2:
Form and use of arrows
Principes de base pour les symboles graphiques utilisables sur le matériel —
Partie 2: Forme et utilisation des flèches
Reference number
ISO 80416-2:2001(E)
©
ISO 2001

---------------------- Page: 1 ----------------------
ISO 80416-2:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 80416-2:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of ISO 80416-2 may be the subject of patent rights.
ISO shall not be held responsible for identifying any or all such patent rights.
In order to collect all requirements concerning basic principles for graphical symbols for use on equipment,
ISO/TC 145, Graphical symbols, and IEC/TC 3, Documentation and graphical symbols, agreed to prepare jointly all
parts of this International Standard and to publish them under the general number 80416. For each of the individual
parts of this series, only one of the two organizations is responsible. Meanwhile, the technical committees have
agreed that no modification will be made to International Standard 80416 except by mutual agreement.
International Standard ISO 80416-2 was accordingly prepared jointly by Technical Committee ISO/TC 145,
Graphical symbols, and Technical Committee IEC/TC 3, Documentation and graphical symbols. The draft was
circulated for voting to the national bodies of both ISO and IEC.
This first edition of ISO 80416-2 cancels and replaces ISO 4196. It provides guidelines which are equally applicable
to graphical symbols prepared within ISO and IEC.
International Standard 80416 consists of the following parts, under the general title Basic principles for graphical
symbols for use on equipment:
� Part 1: Creation of symbol originals (published by IEC)
� Part 2: Form and use of arrows (published by ISO)
� Part 3: Guidelines for the application of graphical symbols (published by IEC)
Annex A forms a normative part of ISO 80416-2.
© ISO 2001 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 80416-2:2001(E)
Introduction
A graphical symbol is a visually perceptible figure used to transmit information independently of language.
Graphical symbols are used on equipment for a wide range of purposes. For such symbols, consistency in the
design of families of symbols used in one location or on similar equipment is an important issue, as is legibility
when these symbols are reduced to small dimensions. Thus, there is a need to standardize the principles for
creating graphical symbols for use on equipment in order to ensure visual clarity, to maintain consistency and
thereby to improve recognition.
This International Standard addresses the basic rules used to create graphical symbols for use on equipment,
including line widths, form and use of arrows, negation elements, and use of the basic pattern which serves as a
guideline for drawing equipment symbols. These design principles should be used for all graphical symbols for use
on equipment, the standardized graphical symbols of which are found in ISO 7000 and IEC 60417.
ISO 80416-2 has been produced to promote the use of a reduced number of arrow forms as symbol elements or
graphical symbols.
iv © ISO 2001 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 80416-2:2001(E)
Basic principles for graphical symbols for use on equipment —
Part 2:
Form and use of arrows
1 Scope
ISO 80416-2 lays down the basic principles and the proportions for arrows used to indicate various elements,
forces, functions or dimensions. The arrows defined in ISO 80416-2 are used as graphical symbols or graphical
symbol elements.
When new symbol originals are created or graphical symbols in current use are revised, the principles established
in ISO
...

SLOVENSKI STANDARD
SIST ISO 80416-2:2002
01-februar-2002
2VQRYQDQDþHODJUDILþQLKVLPERORY]DUDERQDRSUHPLGHO2EOLNDLQXSRUDED
SXãþLF
Basic principles for graphical symbols for use on equipment -- Part 2: Form and use of
arrows
Principes de base pour les symboles graphiques utilisables sur le matériel -- Partie 2:
Forme et utilisation des flèches
Ta slovenski standard je istoveten z: ISO 80416-2:2001
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
SIST ISO 80416-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 80416-2:2002

---------------------- Page: 2 ----------------------

SIST ISO 80416-2:2002
INTERNATIONAL ISO
STANDARD 80416-2
First edition
2001-07-15
Basic principles for graphical symbols for
use on equipment —
Part 2:
Form and use of arrows
Principes de base pour les symboles graphiques utilisables sur le matériel —
Partie 2: Forme et utilisation des flèches
Reference number
ISO 80416-2:2001(E)
©
ISO 2001

---------------------- Page: 3 ----------------------

SIST ISO 80416-2:2002
ISO 80416-2:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 80416-2:2002
ISO 80416-2:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of ISO 80416-2 may be the subject of patent rights.
ISO shall not be held responsible for identifying any or all such patent rights.
In order to collect all requirements concerning basic principles for graphical symbols for use on equipment,
ISO/TC 145, Graphical symbols, and IEC/TC 3, Documentation and graphical symbols, agreed to prepare jointly all
parts of this International Standard and to publish them under the general number 80416. For each of the individual
parts of this series, only one of the two organizations is responsible. Meanwhile, the technical committees have
agreed that no modification will be made to International Standard 80416 except by mutual agreement.
International Standard ISO 80416-2 was accordingly prepared jointly by Technical Committee ISO/TC 145,
Graphical symbols, and Technical Committee IEC/TC 3, Documentation and graphical symbols. The draft was
circulated for voting to the national bodies of both ISO and IEC.
This first edition of ISO 80416-2 cancels and replaces ISO 4196. It provides guidelines which are equally applicable
to graphical symbols prepared within ISO and IEC.
International Standard 80416 consists of the following parts, under the general title Basic principles for graphical
symbols for use on equipment:
� Part 1: Creation of symbol originals (published by IEC)
� Part 2: Form and use of arrows (published by ISO)
� Part 3: Guidelines for the application of graphical symbols (published by IEC)
Annex A forms a normative part of ISO 80416-2.
© ISO 2001 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 80416-2:2002
ISO 80416-2:2001(E)
Introduction
A graphical symbol is a visually perceptible figure used to transmit information independently of language.
Graphical symbols are used on equipment for a wide range of purposes. For such symbols, consistency in the
design of families of symbols used in one location or on similar equipment is an important issue, as is legibility
when these symbols are reduced to small dimensions. Thus, there is a need to standardize the principles for
creating graphical symbols for use on equipment in order to ensure visual clarity, to maintain consistency and
thereby to improve recognition.
This International Standard addresses the basic rules used to create graphical symbols for use on equipment,
including line widths, form and use of arrows, negation elements, and use of the basic pattern which serves as a
guideline for drawing equipment symbols. These design principles should be used for all graphical symbols for use
on equipment, the standardized graphical symbols of which are found in ISO 7000 and IEC 60417.
ISO 80416-2 has been produced to promote the use of a reduced number of arrow forms as symbol elements or
graphical symbols.
iv © ISO 2001 – All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO 80416-2:2002
INTERNATIONAL STANDARD ISO 80416-2:2001(E)
Bas
...

NORME ISO
INTERNATIONALE 80416-2
Première édition
2001-07-15
Principes de base pour les symboles
graphiques utilisables sur le matériel —
Partie 2:
Forme et utilisation des flèches
Basic principles for graphical symbols for use on equipment —
Part 2: Form and use of arrows
Numéro de référence
ISO 80416-2:2001(F)
©
ISO 2001

---------------------- Page: 1 ----------------------
ISO 80416-2:2001(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifiéà moins que l'ordinateur employéà ceteffetne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la créationduprésent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.
© ISO 2001
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque
forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l’ISO à
l’adresse ci-aprèsouducomité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Imprimé en Suisse
ii © ISO 2001 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 80416-2:2001(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une étude aledroit de fairepartie ducomité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en
liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission
électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 3.
Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des comités
membres votants.
L’attention est appelée sur le fait que certains des éléments de l’ISO 80416-2 peuvent faire l’objet de droits de
propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable de ne pas avoir
identifié de tels droits de propriété et averti de leur existence.
Dans le but de rassembler dans une même série toutes les exigences concernant les principes de base pour les
symboles graphiques utilisables sur le matériel, le comité technique ISO/TC 145, Symboles graphiques et
pictogrammes,et lecomité d'étude CEI/CE 3, Structures d'informations, documentation et symboles graphiques se
sont mis d’accord pour élaborer conjointement toutes les parties de la présente Norme internationale et les publier
dans la série 80416. Pour chacune des parties individuelles de cette série, une seule des deux organisations est
responsable. Les comités techniques concernés ont accepté de n’apporter aucune modification à l’une des parties
de la Norme internationale 80416 sans accord mutuel.
La Norme internationale ISO 80416-2 a été ainsi élaborée conjointement par le comité technique ISO/TC 145,
Symboles graphiques et pictogrammes,et le comité d'étude CEI/CE 3, Structures d'informations, documentation et
symboles graphiques.Leprojet a été soumis aux organismes nationaux de l’ISO et de la CEI pour vote.
Cette première édition de l'ISO 80416-2 annule et remplace l’ISO 4196. Elle fournit des lignes directrices
applicables aussi bien aux symboles graphiques élaborés par l’ISO qu’à ceux élaborés par la CEI.
La Norme internationale 80416 comprend les parties suivantes, présentées sous le titre général Principes de base
pour les symboles graphiques utilisables sur le matériel:
� Partie 1: Création des dessins originaux de symboles (publiéepar la CEI)
� Partie 2: Forme et utilisation des flèches (publiéepar l'ISO)
� Partie 3: Indications pour l’application des symboles graphiques (publiée par la CEI)
L'annexe A constitue un élément normatif de l'ISO 80416-2.
© ISO 2001 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 80416-2:2001(F)
Introduction
Un symbole graphique est une figure perceptible visuellement, utilisée pour transmettre des informations d’une
manière indépendante de la langue. Les symboles graphiques sont utiliséssur le matériel dans une grande variété
de buts. Pour de tels symboles, la cohérence dans la conception de familles de symboles utilisésen unmême
endroit ou sur des matériels similaires est une question importante, de même que la lisibilité lorsque ces symboles
sont réduits à de petites dimensions. En conséquence il est nécessaire de normaliser les principes pour la création
des symboles graphiques utilisables sur le matériel, et ce pour assurer la clarté sur le plan visuel, pour maintenir la
cohérence et, en conséquence, pour améliorer la possibilité de reconnaissance du symbole.
La présente Norme internationale, qui comprend plusieurs parties, traite des règles de base utilisées pour créer les
symboles graphiques utiliséssur le matériel, y compris l’épaisseur des traits, la forme et l’utilisation des flèches, les
éléments de négation et l’utilisation de la grille de base, qui servent de lignes directrices pour dessiner des
symboles destinésaumatériel. Ces principes de conception doivent être utilisés pour tous les symboles
graphiques utilisables sur le matériel: les symboles graphiques normalisés correspondants sont donnés dans
l’ISO 7000 et la CEI 60417.
L’ISO 80416-2 a étéélaborée dans le but de favoriser un nombre restreint de formes de flèches utilisables comme
symboles graphiques ou comme éléments de symboles graphiques.
iv © ISO 2001 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 80416-2:2001(F)
Principes de base pour les symboles graphiques utilisables sur
le matériel —
Partie 2:
Forme et utilisation des flèches
1 Domaine d'application
L'ISO 80416-2 établit les principes de base et les proportions qui s'appliquent aux flèches indiquant différents
éléments, forces, fonctions ou dimensions. Les flèches définies dans l'ISO 80416-2 sont utilisées comme symboles
graphiques ou éléments de symboles graphiques.
Lorsque de nouveaux symboles graphiques sont créés ou que des symboles graphiques
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.