Railway applications - Insulation coordination -- Part 2: Overvoltages and related protection

This European Standard applies to:
   Fixed installations (downstream the secondary of the substation transformer) and rolling stock equipment linked to the contact line of one of the systems defined in EN 50163;
   Rolling stock equipment linked to a train line.
This standard gives simulation and/or test requirements for protection against transient overvoltages of such equipment.
Long-term overvoltages are not treated in this document.

Bahnanwendungen - Isolationskoordination -- Teil 2: Überspannungen und geeignete Schutzmaßnahmen

Applications ferroviaires - Coordination de l'isolement -- Partie 2: Surtensions et protections associées

Železniške naprave – Uskladitev izolacije – 2. del: Prenapetosti in ustrezna zaščita

General Information

Status
Withdrawn
Publication Date
30-Jun-2002
Withdrawal Date
20-Jul-2021
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Jul-2021
Due Date
13-Aug-2021
Completion Date
21-Jul-2021

Relations

Buy Standard

Standard
EN 50124-2:2002
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 50124-2:2002
prva izdaja
STANDARD
julij 2002
Železniške naprave – Uskladitev izolacije – 2. del: Prenapetosti in ustrezna
zaščita
Railway applications - Insulation coordination - Part 2: Overvoltages and related
protection
ICS 29.080.01; 29.280 Referenčna številka
SIST EN 50124-2:2002(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 50124-2
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2001
ICS 29.080.99; 29.280
English version
Railway applications - Insulation coordination
Part 2: Overvoltages and related protection
Applications ferroviaires - Bahnanwendungen -
Coordination de l'isolement Isolationskoordination
Partie 2: Surtensions et protections Teil 2: Überspannungen und geeignete
associées Schutzmaßnahmen
This European Standard was approved by CENELEC on 1998-10-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50124-2:2001 E

---------------------- Page: 2 ----------------------

EN 50124-2:2001 - 2 -
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 9X, Electrical and
electronic applications in railways.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50124-2 on
1998-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-10-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2002-10-01
Annexes designated "informative" are given for information only.
In this standard, annex A is informative.
___________

---------------------- Page: 3 ----------------------

- 3 - EN 50124-2:2001
Contents
Page
Introduction. 4
1 Scope . 5
2 Normative references. 5
3 Definitions. 5
4 Contact line network. 6
4.1 Equipment not protected by a metal-oxide arrester . 6
4.2 Equipment protected by a metal-oxide arrester . 6
5 Train line network . 7
5.1 Equipment not protected by a metal-oxide arrester . 7
5.2 Equipment protected by a metal-oxide arrester . 7
6 Tests . 8
Annex A (informative) Maximum value of voltage U according to duration . 9

---------------------- Page: 4 ----------------------

EN 50124-2:2001 - 4 -
Introduction
This European Standard is part of the series EN 50124, Railway applications - Insulation coordination,
which consists of two parts:
− EN 50124-1 Part 1: Basic requirements - Clearances and creepage distances for all electrical
and electronic equipment;
− EN 50124-2 Part 2: Overvoltages and related protection.
This EN 50124-2 is also linked to EN 50163:1995, Railway applications - Supply voltages of traction
systems. This EN 50124-2 deals with the shortest durations of overvoltages referred to as zone A and
zone B in annex A of EN 50163, which is reproduced as an informative annex A of this EN 50124-2.

---------------------- Page: 5 ----------------------

- 5 - EN 50124-2:2001
1 Scope
This European Standard applies to:
− Fixed installations (downstream the secondary of the substation transformer) and rolling stock
equipment linked to the contact line of one of the systems defined in EN 50163;
− Rolling stock equipment linked to a train line.
This standard gives simulation and/or test requirements for protection against transient overvoltages
of such equipment.
Long-term overvoltages are not treated in this document.
2 Normative references
This European Standard incorporates, by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate place in the text and the
publications are listed thereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies.
EN 50123-5 1997 Railway applications - Fixed installations - D.C. switchgear
Part 5: Surge arresters and low-voltage limiters for specific use in d.c.
systems
EN 50163 1995 Railway applications - Supply voltages of traction systems
EN 60099-1 1994 Surge arresters
Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
(IEC 60099-1:1991)
EN 60099-4 1993 Surge arresters
Part 4: Metal-oxide surge arresters without gaps for a.c. systems
(IEC 60099-4:1991)
HD 625.1 S1 1996 Insulation coordination for equipment within low-voltage systems
Part 1: Principles, req
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.