SIST EN IEC 60938-2-1:2024

Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D (IEC 60938-2-1:2023)

This part of IEC 60938-2 is applicable to the drafting of detail specifications for fixed inductors
for which safety tests are required for use in electronic equipment.

Drosseln zur Unterdrückung elektromagnetischer Störungen - Teil 2-1: Vordruck für Bauartspezifikation - Drosseln, für die Sicherheitsprüfungen erforderlich sind - Bewertungsstufe D (IEC 60938-2-1:2023)

Inductances fixes d'antiparasitage - Partie 2-1: Spécification particulière cadre - Inductances nécessitant des essais de sécurité - Niveau d'évaluation D (IEC 60938-2-1:2023)

L’IEC 60938-2-1:2023 s’applique à la rédaction des spécifications particulières pour les inductances fixes qui exigent des essais de sécurité en vue d’une utilisation dans des équipements électroniques.
Une spécification particulière-cadre est un document annexe à la spécification intermédiaire, qui contient des exigences pour le modèle, la disposition et le contenu minimal des spécifications particulières. Les spécifications particulières qui ne satisfont pas à ces exigences ne doivent pas être considérées comme conformes aux spécifications de l’IEC et ne doivent pas être décrites comme telles.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) elle combine l’IEC 60938-2-1:1999 et l’IEC 60938-2-2:1999 en une seule Spécification particulière-cadre (SPC);
b) le programme d’essai pour le contrôle de conformité de la qualité est déplacé vers une annexe informative (Annexe B).

Fiksne dušilke za dušenje elektromagnetnega motenja - 2-1. del: Okvirna podrobna specifikacija - Dušilke, za katere so potrebni varnostni preskusi - Raven ocenjevanja D (IEC 60938-2-1:2023)

Ta del standarda EN 60938-2 se uporablja za pripravo podrobnih specifikacij za fiksne dušilke, za katere se zahteva varnostne preskuse za uporabo v električni opremi.

General Information

• Status: Published
• Public Enquiry End Date: 28-Feb-2023
• Publication Date: 28-Jan-2024
• ICS: 29.100.10 - Magnetic components
• ICS: 29.180 - Transformers. Reactors
• ICS: 31.020 - Electronic components in general
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-Jan-2024
• Due Date: 30-Mar-2024
• Completion Date: 29-Jan-2024
• Ref Project: EN IEC 60938-2-1:2024 - Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required

Relations

• Revised: SIST EN 60938-2-1:2002 - Fixed inductors for electromagnetic interference suppression -- Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D
• Effective Date: 29-Mar-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60938-2-1:2024
01-marec-2024
Fiksne dušilke za dušenje elektromagnetnega motenja - 2-1. del: Okvirna
podrobna specifikacija - Dušilke, za katere so potrebni varnostni preskusi - Raven
ocenjevanja D (IEC 60938-2-1:2023)
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail
specification - Inductors for which safety tests are required - Assessment level D (IEC
60938-2-1:2023)
Drosseln zur Unterdrückung elektromagnetischer Störungen - Teil 2-1: Vordruck für
Bauartspezifikation - Drosseln, für die Sicherheitsprüfungen erforderlich sind -
Bewertungsstufe D (IEC 60938-2-1:2023)
Inductances fixes d'antiparasitage - Partie 2-1: Spécification particulière cadre -
Inductances nécessitant des essais de sécurité - Niveau d'évaluation D (IEC 60938-2-
1:2023)
Ta slovenski standard je istoveten z: EN IEC 60938-2-1:2024
ICS:
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN IEC 60938-2-1:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60938-2-1:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 60938-2-1:2024


EUROPEAN STANDARD EN IEC 60938-2-1

NORME EUROPÉENNE

EUROPÄISCHE NORM January 2024
ICS 29.100.10; 31.020 Supersedes EN 60938-2-1:1999
English Version
Fixed inductors for electromagnetic interference suppression -
Part 2-1: Blank detail specification - Inductors for which safety
tests are required
(IEC 60938-2-1:2023)
Inductances fixes d'antiparasitage - Partie 2-1: Spécification Ortsfeste Induktivitäten zur elektromagnetischen
particulière-cadre - Inductances exigeant des essais de Störunterdrückung - Teil 2-1: Blank-Detailspezifikation -
sécurité Induktivitäten, für die Sicherheitsprüfungen erforderlich sind
(IEC 60938-2-1:2023) - Bewertungsstufe D
(IEC 60938-2-1:2023)
This European Standard was approved by CENELEC on 2024-01-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60938-2-1:2024 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60938-2-1:2024
EN IEC 60938-2-1:2024 (E)
European foreword
The text of document 40/3084/FDIS, future edition 2 of IEC 60938-2-1, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60938-2-1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-10-10
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-01-10
document have to be withdrawn

This document supersedes EN 60938-2-1:1999 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60938-2-1:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60938-2-2:1999 NOTE Approved as EN 60938-2-2:1999 (not mo
...