oSIST prEN ISO 16276-2:2024

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO/DIS 16276-2:2024)

ISO 16276-2:2007 specifies procedures for rating the resistance of coating systems when a cut in the form of a right-angle lattice pattern (cross-cut) or in the form of an X (X-cut) is made into the coating, penetrating through to the substrate.
It also specifies suitable equipment and defines inspection areas, sampling plans and acceptance/rejection criteria.
It does not specify ratings for particular coating systems.

Korrosionsschutz von Stahlbauten durch Beschichtungssysteme - Beurteilung der Adhäsion/Kohäsion (Haftfestigkeit) einer Beschichtung und Kriterien für deren Annahme - Teil2: Gitterschnitt- und Kreuzschnittprüfung (ISO/DIS 16276-2:2024)

Dieser Teil von ISO 16276 legt ein Verfahren zum Bewerten des Widerstandes eines Beschichtungssystems gegen Ablösen fest, wenn ein rechtwinkliges Gitter (Gitterschnitt) in die Beschichtung geschnitten oder die Beschichtung mit einem Kreuzschnitt versehen wird, wobei die Schnitte jeweils bis zum Substrat durchgehen.
Dieser Teil von ISO 16276 ist nur anwendbar, wenn das Gitter- oder Kreuzschnittverfahren zusammen mit dem Kennwert nach der entsprechenden Skala festgelegt ist.
ANMERKUNG   Die Beschichtungseigenschaften können zu Schwierigkeiten bei der Ergebnisauswertung von Gitter- oder Kreuzschnittprüfungen führen.
Dieser Teil von ISO 16276 legt auch die Anwendung von geeigneten Geräten fest und definiert Inspektionsflächen, Messpläne sowie Kriterien für die Annahme/Ablehnung.
Er legt keine Kennwerte für bestimmte Beschichtungssysteme fest.

Protection contre la corrosion des structures en acier par systèmes de peinture - Évaluation et critères d’acceptation de l’adhésion/cohésion (résistance à la rupture) d’un revêtement - Partie 2: Essai de quadrillage et essai à la croix de Saint André (ISO/DIS 16276-2:2024)

L'ISO 16276-2:2007 spécifie des modes opératoires permettant d'évaluer la résistance des systèmes de peinture lorsque ces derniers sont soumis à des incisions en quadrillage ou en croix de Saint André allant jusqu'au subjectile.
L'ISO 16276-2:2007 spécifie également les équipements appropriés, la définition des aires de contrôle, les plans d'échantillonnage et les critères d'acceptation ou de rejet.
Elle n'entend pas donner un classement de performance des différents systèmes de peinture.

Protikorozijska zaščita jeklenih konstrukcij z zaščitnimi premaznimi sistemi - Ocenjevanje adhezije/kohezije (lomne trdnosti) premazov in kriteriji sprejemljivosti - 2. del: Preskušanje po prečnem prerezu in X-prerezu (ISO/DIS 16276-2:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 01-Jul-2024
• ICS: 25.220.20 - Surface treatment
• ICS: 87.020 - Paint coating processes
• ICS: 87.040 - Paints and varnishes
• ICS: 91.080.13 - Steel structures
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 29-May-2024
• Due Date: 16-Oct-2024
• Ref Project: prEN ISO 16276-2 - Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO/DIS 16276-2:2024)

Relations

• Revises: SIST EN ISO 16276-2:2009 - Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007)
• Effective Date: 01-Jul-2024

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16276-2:2024
01-julij-2024
Protikorozijska zaščita jeklenih konstrukcij z zaščitnimi premaznimi sistemi -
Ocenjevanje adhezije/kohezije (lomne trdnosti) premazov in kriteriji sprejemljivosti
- 2. del: Preskušanje po prečnem prerezu in X-prerezu (ISO/DIS 16276-2:2024)
Corrosion protection of steel structures by protective paint systems - Assessment of, and
acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2:
Cross-cut testing and X-cut testing (ISO/DIS 16276-2:2024)
Korrosionsschutz von Stahlbauten durch Beschichtungssysteme - Beurteilung der
Adhäsion/Kohäsion (Haftfestigkeit) einer Beschichtung und Kriterien für deren Annahme
- Teil2: Gitterschnitt- und Kreuzschnittprüfung (ISO/DIS 16276-2:2024)
Protection contre la corrosion des structures en acier par systèmes de peinture -
Évaluation et critères d’acceptation de l’adhésion/cohésion (résistance à la rupture) d’un
revêtement - Partie 2: Essai de quadrillage et essai à la croix de Saint André (ISO/DIS
16276-2:2024)
Ta slovenski standard je istoveten z: prEN ISO 16276-2
ICS:
25.220.20 Površinska obdelava Surface treatment
87.040 Barve in laki Paints and varnishes
91.080.13 Jeklene konstrukcije Steel structures
oSIST prEN ISO 16276-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16276-2:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16276-2:2024
DRAFT
International
Standard
ISO/DIS 16276-2
ISO/TC 35/SC 14
Corrosion protection of steel
Secretariat: DIN
structures by protective paint
Voting begins on:
systems — Assessment of, and
2024-05-15
acceptance criteria for, the
Voting terminates on:
adhesion/cohesion (fracture
2024-08-07
strength) of a coating —
Part 2:
Cross-cut testing and X-cut testing
Anticorrosion des structures en acier par systèmes de
peintures — Évaluation et critères d'acceptation de l'adhésion/
cohésion (résistance à la rupture) d'un revêtement —
Partie 2: Essai de quadrillage et essai à la croix de Saint André
ICS: 87.020
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 16276-2:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16276-2:2024
DRAFT
ISO/DIS 16276-2:2024(en)
International
Standard
ISO/DIS 16276-2
ISO/TC 35/SC 14
Corrosion protection of steel
Secretariat: DIN
structures by protective paint
Voting begins on:
systems — Assessment of, and
acceptance criteria for, the
Voting terminates on:
adhesion/cohesion (fracture
strength) of a coating —
Part 2:
Cross-cut testing and X-cut testing
Anticorrosion des structures en acier par systèmes de
peintures — Évaluation et critères d'acceptation de l'adhésion/
cohésion (résistance à la rupture) d'un revêtement —
Partie 2: Essai de quadrillage et essai à la croix de Saint André
ICS: 87.020
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF
...