iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1495:1999/A1:2004

(Amendment)

Lifting platforms - Mast climbing work platforms

Lifting platforms - Mast climbing work platforms

Reconsidering the paragraphs and subparagraphs being part of the warning of the Official Journal of the European Communities.

Hebebühnen - Mastgeführte Kletterbühnen

Matériels de mise a niveau - Plates-formes de travail se déplaçant le long de mât(s)

Dvižne ploščadi - Delovne ploščadi, ki se vzpenjajo ob jamboru

General Information

Status
Withdrawn
Publication Date
31-May-2004
Withdrawal Date
18-Aug-2010
ICS
53.020.99 - Other lifting equipment
Technical Committee
DTN - Lift and transport appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Aug-2010
Due Date
09-Sep-2010
Completion Date
19-Aug-2010
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/008 - Standardization mandate given to CEN concerning machinery presenting hazards due to the lifting or moving of persons
Ref Project
EN 1495:1997/A1:2003 - Lifting platforms - Mast climbing work platforms

Relations

Consolidated By
SIST EN 1495:1999+A2:2010 - Lifting platforms - Mast climbing work platforms
Effective Date
18-Jan-2023
Consolidated By
SIST EN 1495:1999+A2:2010 - Lifting platforms - Mast climbing work platforms
Effective Date
19-Jan-2023
Replaced By
SIST EN 1495:1999+A2:2010 - Lifting platforms - Mast climbing work platforms
Effective Date
01-Sep-2010
Amends
SIST EN 1495:1999 - Lifting platforms - Mast climbing work platforms
Effective Date
01-Jun-2004

Buy Standard

EN 1495:1999/A1:2004EN 1495:1999/A1:2004
PreviousNext
Amendment
EN 1495:1999/A1:2004
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1495:1999/A1:2004
01-junij-2004
'YLåQHSORãþDGL'HORYQHSORãþDGLNLVHY]SHQMDMRREMDPERUX
Lifting platforms - Mast climbing work platforms
Hebebühnen - Mastgeführte Kletterbühnen
Matériels de mise a niveau - Plates-formes de travail se déplaçant le long de mât(s)
Ta slovenski standard je istoveten z: EN 1495:1997/A1:2003
ICS:
53.020.99 Druga dvigalna oprema Other lifting equipment
SIST EN 1495:1999/A1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1495:1999/A1:2004

---------------------- Page: 2 ----------------------

SIST EN 1495:1999/A1:2004
EUROPEAN STANDARD
EN 1495:1997/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2003
ICS 53.020.99
English version
Lifting platforms - Mast climbing work platforms
Matériels de mise à niveau - Plates-formes de travail se Hebebühnen - Mastgeführte Kletterbühnen
déplaçant le long de mât(s)
This amendment A1 modifies the European Standard EN 1495:1997; it was approved by CEN on 8 September 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1495:1997/A1:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1495:1999/A1:2004
EN 1495:1997/A1:2003 (E)
Contents page
Foreword. 3
5 Safety requirements and/or measures . 4
5.3.2 Guarding . 4
7 Information for use . 4
7.1.2.12 Instructions for erection and dismantling . 4
Annex ZA (informative) Relationship of this document with EU Directives. 5
2

---------------------- Page: 4 ----------------------

SIST EN 1495:1999/A1:2004
EN 1495:1997/A1:2003 (E)
Foreword
This document (EN 1495:1997/A1:2003) has been prepared by Technical Committee CEN/TC 98 “Lifting
platforms”, the secretariat of which is held by DIN.
This Amendment to the European Standard EN 1495:1997 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by May 2004, and conflicting national
standards shall be withdrawn at the latest by May 2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative annex ZA, which is an integral part of this document.
This draft amendment covers the necessary modified precaution
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1493:2023(Main)
Vehicle lifts
EN 1493:2022

This document applies to stationary, mobile and movable vehicle lifts, which are not intended to lift persons but which are designed to raise vehicles totally, for the purpose of examining and working on or under the vehicles whilst in a raised position. The vehicle lift may consist of one or more lifting-units.
Power supply to the vehicle lift by internal combustion engines is not considered.
The floor or ground supporting the vehicle lift in use is assumed to be horizontal.
This document does not exclude a person to enter in a lifted vehicle on wheel supporting lifts, e.g. for special works or for periodical technical inspection, and vehicle lifts for rail-bound vehicles.
This document does not contain requirements for hazards which may arise on vehicle lifts where the carrying device can be tilted.
This document is not valid for equipment for power driven parking of motor vehicles (see EN 14010). This document is applicable to vehicle lifts which are manufactured six month after the date of its publication as EN.

  • Standard
    112 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 280-2:2022(Main)
Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform
EN 280-2:2022

This document, which shall be used in conjunction with EN 280-1:– , specifies the additional safety requirements for MEWPs of Type 1 equipped with a load lifting appliance. The load lifting appliance is designed for lifting suspended loads directly in support of the task being carried out by personal from the work platform. This European Standard deals with the significant hazards, hazardous situations and events relevant to the lifting of loads outside the scope of EN 280-1:–1), when the MEWP and load lifting appliance are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer of the MEWP. The significant hazards covered by this standard are listed in Clause 4.
This European Standard does not cover the following:
a)   the use of a MEWP for lifting persons as a suspended load;
b)   the use of a MEWP for lifting suspended loads from a control position other than the work platform;
NOTE   Where a control position other than the work platform is used the relevant crane standards (e.g. EN 13000, EN 12999) apply.
c)   requirements for lifting accessories;
d)   raising or lowering of suspended loads for general materials handling as carried out by a crane.
Load lifting devices can be:
a)   fixed load attachment points on the work platform or on the extending lifting structure;
b)   lifting equipment for raising or lowering the load with a stationary platform. The equipment is attached to the work platform or extending structure and may have a jib.
NOTE   The lifting equipment can be either permanently attached or interchangeable.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 280-1:2022(Main)
Mobile elevating work platforms - Part 1: Design calculations - Stability criteria - Construction - Safety - Examinations and tests
EN 280-1:2022

1.1   This document specifies safety requirements and measures for all types and sizes of Mobile Elevating Work Platform (MEWP, see 3.1) intended to move persons to working positions where they are carrying out work from the work platform (WP) with the intention that persons are getting on and off the work platform only at access positions at ground level or on the chassis.
This document also covers static elevating work platforms of group B (see 1.4).
NOTE   Machines designed for the handling of goods which are equipped with work platforms as interchangeable equipment are regarded as MEWPs.
1.2   This document is applicable to the structural design calculations and stability criteria, construction, safety examinations and tests before MEWPs are first put into service. It identifies the hazards arising from the use of MEWPs and describes methods for the elimination or reduction of these hazards.
It does not cover the hazards arising from:
a)   use in potentially explosive atmospheres;
b)   electromagnetic incompatibility;
c)   work from the platform on external live electric systems;
d)   use of compressed gases for load bearing components;
e)   getting on and off the work platform at changing levels;
f)   specific applications (e.g. railway, ships) covered by National or local regulations.
1.3   This document does not apply to:
a)   machinery serving fixed landings (see e.g. EN 81-1 and EN 81-2, EN 12159);
b)   fire-fighting and fire rescue appliances (see e.g. EN 1777);
c)   unguided work cages suspended from lifting appliances (see e.g. EN 1808);
d)   elevating operator position on rail dependent storage and retrieval equipment (see EN 528);
e)   tail lifts (see EN 1756-1 and EN 1756-2);
f)   mast climbing work platforms (see EN 1495);
g)   fairground equipment;
h)   lifting tables (see EN 1570-1 and EN 1570-2);
i)   aircraft ground support equipment (see e.g. EN 1915-1 and EN 1915-2);
j)   elevating operator positions on industrial trucks (see EN 1726-2).
1.4   Classification:
MEWPs are divided into two main groups:
a)   Group A:   MEWPs where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines.
b)   Group B:   All other MEWPs.
Relating to travelling, MEWPs are divided into three types:
1)   Type 1:   Travelling is only allowed with the MEWP in its transport configuration;
2)   Type 2:    Travelling with raised work platform is controlled from a point of control at the                   chassis;
3)   Type 3:   Travelling with raised work platform is controlled from a point of control at the work             platform.
NOTE   Type 2 and type 3 can be combined.

  • Standard
    126 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    109 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12158-1:2022(Main)
Builders' hoists for goods - Part 1: Hoists with accessible platforms
EN 12158-1:2021

1.1   This standard deals with power operated temporarily installed builders hoists (referred to as "hoists" in this standard) intended for use by persons who are permitted to enter sites of engineering and construction, serving landing levels, having a load carrying device:
-   designed for the transportation of goods only;
-   guided;
-   travelling vertically or along a path within 15 degrees max. of the vertical;
-   supported or sustained by drum driven wire rope, chain, rack and pinion, hydraulic jack (direct or indirect), or an expanding linkage mechanism;
-   where masts, when erected, may or may not require support from separate structures;
-   which permits the access of instructed persons during loading and unloading;
-   which are driven by appointed persons;
-   which permits, if necessary, during erection, dismantling, maintenance and inspection, the access and travel by persons who are competent and authorised.
1.2   The standard identifies hazards as listed in clause 4 which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer.
1.3   This European standard does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   electromagnetic compatibility (emission, immunity);
-   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
-   the use of combustion engines;
-   the use of remote controls;
-   hazards occurring during manufacture;
-   hazards occurring as a result of mobility;
-   hazards occurring as a result of being erected over a public road;
-   earthquakes;
-   noise.
1.4   This standard is not applicable to
-   builders hoists for persons and materials;
-   lifts according to EN 8

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1756-1:2021(Main)
Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
EN 1756-1:2021

This document specifies safety requirements for design of tail lifts as defined in 3.1 for mounting on wheeled goods vehicles. It also specifies the verification of such tail lifts and the safety information that has to be provided for their use.
This document deals with the technical requirements to minimize the hazards listed in Clause 4 which can arise during the operation of tail lifts when carried out in accordance with the specifications as intended by the manufacturer or his authorized representative.
It applies to tail lifts:
-   used for the purpose of loading and/or unloading such vehicles;
-   intended to be fitted, temporarily or permanently, either inside or on the front, side or rear of the wheeled vehicle;
-   driven either by hand or electric powered;
-   equipped with a platform to support loads which comprise goods, an operator, or a combination of the two;
-   with a maximum lifting height not exceeding 3 m above ground when the platform is unloaded;
-   rotary type with a maximum lifting height not exceeding 2 m;
-   used as a link bridge when intended by the manufacturer.
NOTE   A tail lift is not to be confused with a link bridge attached to a loading dock which is included within the definition of a dock leveller and is outside the scope of this document.
Loading and/or unloading operations include the use of a tail lift to lift and/or lower loads.
This document does not establish the additional requirements for:
-   operation in severe conditions (e.g. extreme environmental conditions such as freezer applications, high temperatures, corrosive environment, tropical environment, contaminating environments, strong magnetic fields);
-   operations subject to special rules (e.g. potentially explosive atmospheres);
-   supply by electrical networks and the electrical circuit;
-   power take off part of the system;
-   electronic equipment;
-   electromagnetic compatibility (emission-immunity);
-   static electricity problems;
-   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, especially brittle loads);
-   hazards occurring during installation, transportation, decommissioning;
-   hazards occurring when handling suspended loads which may swing freely;
-   requirement related to the use on public roads;
-   wind pressure in and out of use;
-   direct contact with foodstuffs;
-   earthquake;
-   lightning;
This document is not applicable to tail lifts manufactured before the publication of this document.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1570-2:2017(Main)
Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s
EN 1570-2:2016

1.1   This European Standard specifies the safety requirements applicable to slow-speed platform lifts presenting the following characteristics:
   serving 2 or more set levels of a building or construction structure;
   able to cross landings;
   designed exclusively for lifting or lowering loads;
   only accessible to operators during the loading/unloading phases;
   with a travel speed of no more than 0.15 m/s;
   useable solely by people who have been authorized and briefed;
   permanently installed.
1.2   This European Standard deals with all significant hazards pertinent to slow-speed platform lifts when used as intended and under the conditions foreseen by the manufacturer (see Article 4). This European Standard specifies the appropriate technical measures for eliminating and reducing the risks arising from the significant hazards.
1.3   This European Standard does not apply to the following equipment:
   permanently and/or temporarily installed platform lifts, serving specific levels of a building, with a vertical travel speed exceeding 0.15 m/s (EN 81-31);
   lifting tables serving no more than two set levels of a building and not crossing a landing (EN 1570-1);
   lift platforms designed for mobility-impaired persons (EN 81-40 and prEN 81 41);
   platform lifts used on ships;
   lifts designed for lifting artists and stage set features during artistic performances;
   lifts driven by pusher chains.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1808:2015(Main)
Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
EN 1808:2015

This European Standard specifies the requirements, test methods, marking and information to be provided by the manufacturer/supplier for Suspended Access Equipment (SAE).
It is applicable to both permanent and temporary equipment which may be powered or hand operated and which are defined in Section 4.
The requirements of this standard include the rails, tracks and other support systems on which SAE depend for their integrity and safety as well as taking into account all associated loads and fixings to the building structure.
This European Standard deals with significant hazards pertinent to SAE when they are used as intended and under the conditions foreseen by the manufacturer (see Section 4). This European Standard specifies appropriate technical measures to eliminate or reduce risks arising from the significant hazards.

  • Standard
    131 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1570-1:2012+A1:2014(Main)
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN 1570-1:2011+A1:2014

1.1   This European Standard specifies the safety requirements for industrial lifting tables for raising and/or lowering goods and the operator(s):
-   where the lifting table does not pass a fixed landing;
-   serving not more than 2 fixed landings.
1.2   This European Standard deals with all significant hazards pertinent to lifting tables when they are used as intended by the operating instructions and under the conditions foreseen (including foreseeable misuse) with the operating instructions (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce the risks arising from the significant hazards.
1.3   Both power operated and manually operated lifting tables are included whether stationary or mobile.
1.4    This European Standard does not apply to the following equipment:
-   lifting tables, serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s (EN 1570-2);
-   lifting tables, serving more than 2 fixed landings of a building for lifting operators, with a vertical travel speed not exceeding 0,15 m/s (EN 1570-3);
-   lifting tables carrying operators and installed in full enclosures (EN 1570-3);
-   permanently and temporarily installed lifting tables, serving specific levels of a building for lifting operators, with a vertical travel speed exceeding 0,15 m/s (EN 81-1 and EN 81-2);
-   lifting tables with flat or toothed belts lifting systems for the carrying of operators;
-   lifting tables whose vertical travel speed exceeds 0,15 m/s (unless safe by position and non person carrying);
-   power operated lifting platforms for persons with impaired mobility (EN 81-41);
-   mobile lifting tables for airport ground support equipment (EN 1915-2 and EN 12312 1);
-   lifting tables which are designed as part of a lift according to Directive (95/16/EC);
-   lifting tables used on ships;
-   mobile elevating work platforms (EN 280);
-   static elevating work platforms;
-   vehicle lifts for maintenance (EN 1493);
-   mobile lifting tables used for fire fighting (EN 1777);
-   mobile lifting tables used as fork lift trucks and order pickers;
-   mobile lifting tables with a horizontal travelling speed of more than 1,6 m/s;
-   rail dependent storage and retrieval equipment (EN 528);
-   theatre stage lifts intended to move performers;
-   scissor lift pallet trucks (EN ISO 3691 5);
-   suspended lifting tables;
-   lifting tables operated by pushing chains.
1.5   This standard does not establish the additional requirements for:
-   electromagnetic compatibility;
-   operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);
-   operation subject to special rules (e.g. potentially explosive atmospheres, mines);
-   handling of loads, the nature of which could lead to dangerous situations (e.g. molten metal, acids, radiating materials, especially brittle loads);
-   hazards occurring during construction, transportation and disposal;
-   equipment installed on the load platform or replacing it;
-   integration into systems or other machines, control from more than two control stations, etc.;
-   cable-less controls;
-   lifting tables where the hydraulic pressure is derived directly from gas pressure;
-   the power supply to the lifting table by internal combustion engine.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12159:2013(Main)
Builders hoists for persons and materials with vertically guided cages
EN 12159:2012

This European Standard deals with power operated temporarily installed builders hoists (referred to as "hoists" in this standard) intended for use by persons who are permitted to enter sites of engineering and construction, serving landing levels, having a cage: - designed for the transportation of persons or of persons and materials; - guided; - travelling vertically or along a path within 15° max. of the vertical; - supported or sustained by drum driven wire rope, rack and pinion, or an expanding linkage mechanism; - where masts, when erected, may or may not require support from separate structures. The European Standard identifies hazards as listed in Clause 4 which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12158-2:2002+A1:2010(Main)
Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices
EN 12158-2:2000+A1:2010

This standard deals with power operated temporarily installed builders hoists intended for use by persons who are permitted to enter sites of engineering and construction, serving either one upper landing or a work area extending to the end of the guides, (e.g. a roof) having a load carrying device (lcd): - which is intended for the transportation of goods only; - where it is forbidden for persons to step upon it at any time; - which is guided; - which is designed to travel at an angle of at least 30 degrees to the vertical but may be used at any angle between the vertical and the maximum inclination as specified by the manufacturer; - which is sustained by steel wire rope and a positive drive system; - which is controlled by hold-to-run controls by the operator; - which does not benefit from the use of any counterweight; - which has a maximum rated load of 300 kg; - which has a maximum speed of 1,00 m/s; and where the guides require support from separate structures. The standard identifies hazards as listed in clause 4, which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer. The safety requirements and/or measures of this standard deal with the design of the base frame, guide rails, lcd, drive unit, electrical and/or hydraulic installation and the control of the hoist. Included is the design of any guide rail support but not the design of the supporting structure (e.g. building or scaffold) and any ties. Other aspects such as base enclosure, the design of any concrete, hard core, timber or other foundation arrangement, hoistway protection and the upper landing are dealt with in the users' manual section of this standard.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day