SIST EN ISO 216:2009
(Main)Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction (ISO 216:2007)
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction (ISO 216:2007)
This International Standard specifies the trimmed sizes of writing paper and certain classes of printed matter. It applies to trimmed sizes of paper for administrative, commercial and technical use, and also to certain classes of printed matter, such as forms, catalogues, etc. It does not necessarily apply to newspapers, published books, posters or other special items which may be the subject of separate International Standards. This International Standard also specifies the method for the indication of the machine direction for trimmed sheets.
Schreibpapier und bestimmte Gruppen von Drucksachen - Endformate - A- und B-Reihen und Kennzeichnung der Maschinenlaufrichtung (ISO 216:2007)
Diese Internationale Norm legt die Endformate für Schreibpapier und bestimmte Gruppen von Drucksachen fest.
Sie gilt für Papierendformate für administrative, kaufmännische und technische Zwecke sowie auch für bestimmte Gruppen von Drucksachen wie Vordrucke, Kataloge usw.
Sie gilt nicht notwendigerweise für Zeitungen, Bücher, Plakate oder andere spezielle Artikel, die möglicherweise in anderen Internationalen Normen behandelt werden.
Diese Internationale Norm legt darüber hinaus das Verfahren zur Kennzeichnung der Maschinenlaufrichtung (Herstellungsrichtung) für die Endformate fest.
Papiers d'écriture et certaines catégories d'imprimés - Formats finis - Séries A et B, et indication du sens machine (ISO 216:2007)
L'ISO 216:2007 spécifie les formats finis des papiers à écrire et de certaines catégories d'imprimés.
Elle s'applique aux formats finis de papier pour usages administratif, commercial et technique ainsi qu'à certaines catégories d'imprimés, tels que formulaires, catalogues, etc.
Elle ne s'applique pas nécessairement au papier journal, à l'édition, aux affiches publicitaires ou aux usages particuliers qui pourront faire l'objet d'autres Normes internationales.
L'ISO 216:2007 spécifie également la méthode permettant d'indiquer le sens machine des formats finis.
Pisalni papir in nekatere vrste tiskovin - Obrezane pole - Formata A in B z oznako vzdolžne smeri (ISO 216:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 216:2009
01-januar-2009
1DGRPHãþD
SIST EN ISO 216:2002
Pisalni papir in nekatere vrste tiskovin - Obrezane pole - Formata A in B z oznako
vzdolžne smeri (ISO 216:2007)
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and
indication of machine direction (ISO 216:2007)
Schreibpapier und bestimmte Gruppen von Drucksachen - Endformate - A- und B-
Reihen und Kennzeichnung der Maschinenlaufrichtung (ISO 216:2007)
Papiers d'écriture et certaines catégories d'imprimés - Formats finis - Séries A et B, et
indication du sens machine (ISO 216:2007)
Ta slovenski standard je istoveten z: EN ISO 216:2007
ICS:
85.080.10 Pisarniški papir Office paper
SIST EN ISO 216:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 216:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 216:2009
EUROPEAN STANDARD
EN ISO 216
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2007
ICS 85.080.10 Supersedes EN ISO 216:2001
English Version
Writing paper and certain classes of printed matter - Trimmed
sizes - A and B series, and indication of machine direction (ISO
216:2007)
Papiers à écrire et certaines catégories d'imprimés - Schreibpapier und bestimmte Gruppen von Drucksachen -
Formats finis - Séries A et B, et indication du sens machine Endformate - A- und B-Reihen und Kennzeichnung der
(ISO 216:2007) Maschinenlaufrichtung (ISO 216:2007)
This European Standard was approved by CEN on 8 September 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 216:2007: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 216:2009
EN ISO 216:2007 (E)
Contents Page
Foreword.3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 216:2009
EN ISO 216:2007 (E)
Foreword
This document (EN ISO 216:2007) has been prepared by Technical Committee ISO/TC 6 "Paper, board and
pulps" in collaboration with Technical Committee CEN/TC 172 "Pulp, paper and board", the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2008, and conflicting national standards shall be withdrawn at
the latest by March 2008.
This document supersedes EN ISO 216:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 216:2007 has been approved by CEN as a EN ISO 216:2007 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 216:2009
---------------------- Page: 6 ----------------------
SIST EN ISO 216:2009
INTERNATIONAL ISO
STANDARD 216
Second edition
2007-09-15
Writing paper and certain classes of
printed matter — Trimmed sizes —
A and B series, and indication of machine
direction
Papiers à écrire et certaines catégories d'imprimés — Formats finis —
Séries A et B, et indication du sens machine
Reference number
ISO 216:2007(E)
©
ISO 2007
---------------------- Page: 7 ----------------------
SIST EN ISO 216:2009
ISO 216:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 216:2009
ISO 216:2007(E)
Contents Page
Foreword. iv
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Underlying principles .2
5 Designation of trimmed sizes and machine direction .4
6 Trimmed sizes.5
7 Tolerances .6
Annex A (informative) Examples of use of ISO sizes .8
Bibliography .9
© ISO 2007 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 216:2009
ISO 216:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 216 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps.
This second edition cancels and replaces the first edition (ISO 216:1975), which has been technically revised.
The principal change is the addition of a method for the indication of the machine direction.
iv © ISO 2007 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 216:2009
INTERNATIONAL STANDARD ISO 216:2007(E)
Writing paper and certain classes of printed matter — Trimmed
sizes — A and B series, and indication of machine direction
1 Scope
This International Standar
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.