iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 55015:1995

(Main)

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

This standard applies to the emission (radiated and conducted) of radio frequency disturbances from and to the immunity to radio frequency disturbances of: all lighting equipment with a primary function of generating and/or distributing light intended for illumination purposes, and intended either for connection to the low voltage electricity supply or for battery operation; the lighting part of multi-function equipment where one of the primary functions of this is illumination; independent auxiliaries exclusively for use with lighting equipment; UV and IR radiation appliances; neon advertising signs; street/flood lighting (installed for outdoor use only; transport lighting (installed in buses, trains, etc). Excluded from the scope of this standard are: apparatus for which the electromagnetic compatibility requirements in the radio frequency range are explicitly formulated in other IEC or CISPR standards

Grenzwerte und Meßverfahren für Funkstörungen von elektrischen Beleuchtungseinrichtungen und ähnlichen Elektrogeräten

Limites et méthodes de mesure des perturbations radioélectriques produites par les appareils électriques d'éclairage et les appareils analogues

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

General Information

Status
Withdrawn
Publication Date
31-Mar-1995
Withdrawal Date
31-Dec-1995
ICS
33.100.01 - Electromagnetic compatibility in general
Technical Committee
EMC - Electromagnetic compatibility
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jan-1996
Due Date
01-Jan-1996
Completion Date
01-Jan-1996
Directive
89/336/EEC - Electromagnetic compatibility (EMC)
Mandate
BC/CLC/92-02 - BC/CLC/92-02
Ref Project
EN 55015:1993 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

Relations

Replaced By
SIST EN 55015:1997 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (CISPR 15:1996)
Effective Date
06-May-2014
Replaced By
SIST EN 55015:1997 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (CISPR 15:1996)
Effective Date
28-Jan-2023

Buy Standard

EN 55015:1995EN 55015:1995
PreviousNext
Standard
EN 55015:1995
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 55015:1995
01-april-1995
Limits and methods of measurement of radio disturbance characteristics of
electrical lighting and similar equipment
Limits and methods of measurement of radio disturbance characteristics of electrical
lighting and similar equipment
Grenzwerte und Meßverfahren für Funkstörungen von elektrischen
Beleuchtungseinrichtungen und ähnlichen Elektrogeräten
Limites et méthodes de mesure des perturbations radioélectriques produites par les
appareils électriques d'éclairage et les appareils analogues
Ta slovenski standard je istoveten z: EN 55015:1993
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 55015:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 55015:1995

---------------------- Page: 2 ----------------------

SIST EN 55015:1995

---------------------- Page: 3 ----------------------

SIST EN 55015:1995

---------------------- Page: 4 ----------------------

SIST EN 55015:1995

---------------------- Page: 5 ----------------------

SIST EN 55015:1995

---------------------- Page: 6 ----------------------

SIST EN 55015:1995

---------------------- Page: 7 ----------------------

SIST EN 55015:1995

---------------------- Page: 8 ----------------------

SIST EN 55015:1995

---------------------- Page: 9 ----------------------

SIST EN 55015:1995

---------------------- Page: 10 ----------------------

SIST EN 55015:1995

---------------------- Page: 11 ----------------------

SIST EN 55015:1995

---------------------- Page: 12 ----------------------

SIST EN 55015:1995

---------------------- Page: 13 ----------------------

SIST EN 55015:1995

---------------------- Page: 14 ----------------------

SIST EN 55015:1995

---------------------- Page: 15 ----------------------

SIST EN 55015:1995

---------------------- Page: 16 ----------------------

SIST EN 55015:1995

---------------------- Page: 17 ----------------------

SIST EN 55015:1995

---------------------- Page: 18 ----------------------

SIST EN 55015:1995

---------------------- Page: 19 ----------------------

SIST EN 55015:1995

---------------------- Page: 20 ----------------------

SIST EN 55015:1995

----------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 55036:2020/A1:2023(Amendment)
Amendment 1 - Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz
EN IEC 55036:2020/A1:2023
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50715:2022(Main)
Electromagnetic compatibility - Radio frequency emission - Statistical considerations in the determination of compliance for mass-produced products with requirements for unwanted radio frequency emission
EN 50715:2022

To provide a Standard (not TR)
This standard to provide  statistical methods  for  the determination of compliance with radio frequency emission limits for mass-produced products.
This standard to be derived from the basic EMC technical report  CISPR TR 16-4-3   "Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products."

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61000-3-3:2014/A2:2022/AC:2022(Corrigendum)
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
EN 61000-3-3:2013/A2:2021/AC:2022-01

IEC Corrected version

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61000-3-3:2014/A2:2022(Amendment)
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
EN 61000-3-3:2013/A2:2021

The contents of the corrigendum of January 2022 have been included in this copy.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61000-4-30:2015/A1:2021(Amendment)
Amendment 1: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
EN 61000-4-30:2015/A1:2021
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 55036:2020(Main)
Electric and hybrid road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz
EN IEC 55036:2020

EN-IEC 55036 defines limits for 3 m measurement distance and methods of measurement thatare designed to provide protection for off-board receivers (at 10 m distance) in the frequencyrange of 150 kHz to 30 MHz when used in the residential environment.This document applies to the emission of electromagnetic energy which might causeinterference to radio reception and which is emitted from electric and hybrid electric vehiclespropelled by an internal traction battery (see 3.2 and 3.3) when operated on the road.This document applies to vehicles that have a traction battery voltage between 100 V and1 000 V.Electric vehicles to which CISPR 14-1 applies are not in the scope of this document.This document applies only to road vehicles where an electric propulsion is used for sustainedspeed of more than 6 km/h.Vehicles where the electric motor is only used to start up the internal combustion engine(e.g. "micro hybrid") and vehicles where the electric motor is used for additional propulsion onlyduring acceleration (e.g. "48 V mild hybrid vehicles") are not in the scope of this document.The radiated emission requirements in this document are not applicable to the intentionaltransmissions from a radio transmitter as defined by the ITU including their spurious emissions.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61000-3-3:2014/A1:2019(Amendment)
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
EN 61000-3-3:2013/A1:2019

This part of IEC 61000 is concerned with the limitation of voltage fluctuations and flicker impressed on the public low-voltage system. It specifies limits of voltage changes which may be produced by an equipment tested under specified conditions and gives guidance on methods of assessment. This part of IEC 61000 is applicable to electrical and electronic equipment having an input current equal to or less than 16 A per phase, intended to be connected to public low-voltage distribution systems of between 220 V and 250 V line to neutral at 50 Hz, and not subject to conditional connection. Equipment which does not comply with the limits of this part of IEC 61000 when tested with the reference impedance Zref of 6.4, and which therefore cannot be declared compliant with this part, may be retested or evaluated to show conformity with IEC 61000-3-11. Part 3-11 is applicable to equipment with rated input current ≤ 75 A per phase and subject to conditional connection. The tests according to this part are type tests. Particular test conditions are given in Annex A and the test circuit is shown in Figure 1.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61000-2-2:2003/A2:2019(Amendment)
Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
EN 61000-2-2:2002/A2:2019

This standard is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz, with an extension up to 148,5 kHz specifically for mains signalling systems. It gives compatibility levels for public low voltage a.c. distribution systems having a nominal voltage up to 420 V, single-phase or 690 V, three-phase and a nominal frequency of 50 Hz or 60 Hz.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 55016-4-2:2011/A2:2018/AC:2019(Corrigendum)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
EN 55016-4-2:2011/A2:2018/AC:2019-02
  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 55016-4-2:2011/A2:2018(Amendment)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty - Conducted disturbance measurements
EN 55016-4-2:2011/A2:2018
  • Amendment
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day