SIST EN ISO 1833-12:2019
(Main)Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide) (ISO 1833-12:2019)
Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide) (ISO 1833-12:2019)
This document specifies a method, using dimethylformamide, to determine the mass percentage of
acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of
mixtures of
— acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres
with
— wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, elastomultiester,
elastolefin, melamine, polyacrylate or glass fibres.
It is not applicable to animal hair, wool and silk dyed with chromium based mordant dyes.
NOTE Dyestuff identification is described in ISO 16373-1[3].
Textilien - Quantitative chemische Analysen - Teil 12: Mischungen aus Polyacrylfasern, bestimmten Modacryl- oder Chlorfasern, bestimmten Elastanen mit bestimmten anderen Fasern (Dimethylformamid-Verfahren) (ISO 1833-12:2019)
Dieses Dokument legt ein Dimethylformamid Verfahren zur Bestimmung des prozentualen Massenanteils an Polyacryl, Modacryl, Chlorfasern oder Elastan, nach dem Abtrennen der nichtfaserigen Begleitstoffe, in Textilien aus Fasermischungen aus
— Polyacrylfasern, bestimmten Modacrylfasern, bestimmten Chlorfasern, bestimmten Elastanfasern
mit
— Wolle, Tierhaaren, Seide, Baumwolle, Viskose, Cupro, Modal, Lyocell, Polyamid, Polyester, Elasto-multiester , Elastolefin , Melamin , Polyacrylat oder Glasfasern fest.
Es ist nicht anwendbar auf Tierhaare, Wolle und Seide, die mit Beizfarbstoffen auf Chrombasis gefärbt sind.
ANMERKUNG ISO 16373 1 [3] beschreibt die Farbstoff Identifikation.
Textiles - Analyse chimique quantitative - Partie 12: Mélanges d'acrylique, certains modacryliques, certaines chlorofibres, certains élasthannes avec certaines autres fibres (méthode au diméthylformamide) (ISO 1833-12:2019)
Le présent document spécifie une méthode de détermination, au diméthylformamide, de la masse, exprimée en pourcentage, d'acryliques, de modacryliques, de chlorofibres ou d'élasthannes, après élimination des matières non fibreuses, dans les textiles composés de mélanges de:
— acrylique, certains modacryliques, certaines chlorofibres, certaines fibres d'élasthanne
avec
— laine, poils animaux, soie, coton, viscose, cupro, modal, lyocell, polyamide, polyester, élastomultiester, élastoléfine, mélamine, polyacrylate ou fibres de verre.
Il ne s'applique pas aux poils animaux, à la laine et la soie teints avec des colorants à mordant au chrome.
NOTE L'identification des colorants est décrite dans l'ISO 16373‑1.
Tekstilije - Kvantitativna kemična analiza - 12. del: Mešanica akrilnih, nekaterih modakrilnih, nekaterih klorovlaken, nekaterih elastanovih in nekaterih drugih vlaken (metoda z uporabo dimetilformamida) (ISO 1833-12:2019)
Ta dokument določa metodo z uporabo dimetilformamida za ugotavljanje masnega odstotka akrila, modakrila, klorovlaken ali elastana po odstranitvi nevlakenske snovi v tekstilijah iz mešanic:
– akrila, nekaterih modakrilov, nekaterih klorovlaken ali nekaterih elastanskih vlaken in
– volne, živalskih vlaken, svile, bombaža, viskoze, kupro vlaken, modalnih, liocelnih, poliamidnih, poliestrskih, elastomultiestrskih, elastofeinskih, melaminskih, poliakrilatnih ali steklenih vlaken.
Ne uporablja se za živalska vlakna, volno in svilo, barvana z jedkimi barvili na osnovi kroma.
OPOMBA: Identifikacija barvil je opisana v standardu ISO 16373-1[3].
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 1833-12:2019
01-september-2019
Nadomešča:
SIST EN ISO 1833-12:2013
Tekstilije - Kvantitativna kemična analiza - 12. del: Mešanica akrilnih, nekaterih
modakrilnih, nekaterih klorovlaken, nekaterih elastanovih in nekaterih drugih
vlaken (metoda z uporabo dimetilformamida) (ISO 1833-12:2019)
Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain
modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method
using dimethylformamide) (ISO 1833-12:2019)
Textilien - Quantitative chemische Analysen - Teil 12: Mischungen aus Polyacrylfasern,
bestimmten Modacryl- oder Chlorfasern, bestimmten Elastanen mit bestimmten anderen
Fasern (Dimethylformamid-Verfahren) (ISO 1833-12:2019)
Textiles - Analyse chimique quantitative - Partie 12: Mélanges d'acrylique, certains
modacryliques, certaines chlorofibres, certains élasthannes avec certaines autres fibres
(méthode au diméthylformamide) (ISO 1833-12:2019)
Ta slovenski standard je istoveten z: EN ISO 1833-12:2019
ICS:
59.060.20 Umetna vlakna Man-made fibres
71.040.40 Kemijska analiza Chemical analysis
SIST EN ISO 1833-12:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 1833-12:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 1833-12:2019
EN ISO 1833-12
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 59.060.01 Supersedes EN ISO 1833-12:2010
English Version
Textiles - Quantitative chemical analysis - Part 12:
Mixtures of acrylic, certain modacrylics, certain
chlorofibres, certain elastane fibres with certain other
fibres (method using dimethylformamide) (ISO 1833-
12:2019)
Textiles - Analyse chimique quantitative - Partie 12: Textilien - Quantitative chemische Analysen - Teil 12:
Mélanges d'acrylique, certains modacryliques, Mischungen aus Polyacrylfasern, bestimmten
certaines chlorofibres, certains élasthannes avec Modacryl- oder Chlorfasern, bestimmten Elastanen mit
certaines autres fibres (méthode au bestimmten anderen Fasern (Dimethylformamid-
diméthylformamide) (ISO 1833-12:2019) Verfahren) (ISO 1833-12:2019)
This European Standard was approved by CEN on 1 March 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1833-12:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1833-12:2019
EN ISO 1833-12:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 1833-12:2019
EN ISO 1833-12:2019 (E)
European foreword
This document (EN ISO 1833-12:2019) has been prepared by Technical Committee ISO/TC 38
"Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2020, and conflicting national standards shall
be withdrawn at the latest by January 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1833-12:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 1833-12:2019 has been approved by CEN as EN ISO 1833-12:2019 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 1833-12:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 1833-12:2019
INTERNATIONAL ISO
STANDARD 1833-12
Second edition
2019-03
Textiles — Quantitative chemical
analysis —
Part 12:
Mixtures of acrylic, certain
modacrylics, certain chlorofibres,
certain elastane fibres with
certain other fibres (method using
dimethylformamide)
Textiles — Analyse chimique quantitative —
Partie 12: Mélanges d'acrylique, certains modacryliques, certaines
chlorofibres, certains élasthannes avec certaines autres fibres
(méthode au diméthylformamide)
Reference number
ISO 1833-12:2019(E)
©
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 1833-12:2019
ISO 1833-12:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 1833-12:2019
ISO 1833-12:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus . 2
7 Test procedure . 2
8 Calculation and expression of results . 2
9 Precision .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.