SIST EN IEC 61784-5-22:2024
(Main)Industrial networks - Profiles - Part 5-22: Installation of fieldbuses - Installation profiles for CPF 22 (IEC 61784-5-22:2024)
Industrial networks - Profiles - Part 5-22: Installation of fieldbuses - Installation profiles for CPF 22 (IEC 61784-5-22:2024)
This part of IEC 61784-5 specifies the installation profile for CPF 22 (AUTBUS™ 1).
The installation profile is specified in Annex A. This annex is read in conjunction with
IEC 61918:2018, IEC 61918:2018/AMD1:2022 and IEC 61918:2018/AMD2:2024.
Industrielle Kommunikationsnetze - Profile - Teil 5-22: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 22 (IEC 61784-5-22:2024)
Réseaux industriels - Profils - Partie 5-22: Installation des bus de terrain - Profils d'installation pour CPF 22 (IEC 61784-5-22:2024)
L’IEC 61784-5-22:2024 définit le profil d’installation pour la CPF 22 (AUTBUS™ [1]).
Le profil d’installation est spécifié à l’Annexe A. La présente annexe doit être utilisée conjointement avec l’IEC 61918:2018, l’IEC 61918:2018/AMD1:2022 et l’IEC 61918:2018/AMD2:2024.
[1] AUTBUSTM est l’appellation commerciale de Kyland Technology Co., Ltd. Cette information est donnée à l’intention des utilisateurs du présent document et ne signifie nullement que l’IEC approuve ou recommande l’organisation détentrice de l’appellation commerciale, ni un quelconque de ses produits. La conformité n’exige pas l’utilisation de l’appellation commerciale. L’utilisation de l’appellation commerciale exige l’autorisation de Kyland Technology Co., Ltd.
Industrijska omrežja - Profili - 5-22. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 22 (IEC 61784-5-22:2024)
Ta del standarda IEC 61784-5 določa inštalacijski profil za CPF 22 (AUTBUS™ 1). Inštalacijski profil je določen v dodatku A, ki ga je treba uporabljati skupaj s standardi IEC 61918:2018, IEC 61918:2018/AMD1:2022 in IEC 61918:2018/AMD2:2024.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Industrijska omrežja - Profili - 5-22. del: Inštalacija procesnih vodil - Inštalacijski
profili za CPF 22 (IEC 61784-5-22:2024)
Industrial networks - Profiles - Part 5-22: Installation of fieldbuses - Installation profiles
for CPF 22 (IEC 61784-5-22:2024)
Industrielle Kommunikationsnetze - Profile - Teil 5-22: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 22 (IEC 61784-5-22:2024)
Réseaux industriels - Profils - Partie 5-22: Installation des bus de terrain - Profils
d'installation pour CPF 22 (IEC 61784-5-22:2024)
Ta slovenski standard je istoveten z: EN IEC 61784-5-22:2024
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.40 Transportni sloj Transport layer
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61784-5-22
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2024
ICS 25.040
English Version
Industrial networks - Profiles - Part 5-22: Installation of
fieldbuses - Installation profiles for CPF 22
(IEC 61784-5-22:2024)
Réseaux industriels - Profils - Partie 5-22: Installation des Industrielle Kommunikationsnetze - Profile - Teil 5-22:
bus de terrain - Profils d'installation pour CPF 22 Feldbusinstallation - Installationsprofile für die
(IEC 61784-5-22:2024) Kommunikationsprofilfamilie 22
(IEC 61784-5-22:2024)
This European Standard was approved by CENELEC on 2024-04-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61784-5-22:2024 E
European foreword
The text of document 65C/1279/FDIS, future edition 1 of IEC 61784-5-22, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61784-5-
22:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-01-15
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-04-15
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 61918:2018, EN IEC 61918:2018/A1:2022 and EN
IEC 61918:2018/A2:2024.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61784-5-22:2024 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61918 2018 Industrial communication networks - EN IEC 61918 2018
Installation of communication networks in
industrial premises
- - AC 2019-03
- - + A11 2019
+ AMD1 2022 + A1 2022
- - + A12 2023
+ AMD2 2024 +A2 2024
IEC 61784-5-22 ®
Edition 1.0 2024-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial networks – Profiles –
Part 5-22: Installation of fieldbuses – Installation profiles for CPF 22
Réseaux industriels – Profils –
Partie 5-22: Installation des bus de terrain – Profils d'installation pour CPF 22
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040 ISBN 978-2-8322-8350-9
– 2 – IEC 61784-5-22:2024 © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
4 CPF 22: Overview of installation profiles . 7
5 Installation profile conventions. 8
6 Conformance to installation profiles . 8
Annex A (normative) CP 22/1 (AUTBUS™) specific installation profile . 10
A.1 Installation profile scope . 10
A.2 Normative references . 10
A.3 Installation profile terms, definitions, and abbreviated terms . 10
A.3.1 Terms and definitions . 10
A.3.2 Abbreviated terms . 10
A.3.3 Conventions for installation profiles . 10
A.4 Installation planning . 10
A.4.1 General . 10
A.4.2 Planning requirements . 10
A.4.3 Network capabilities . 11
A.4.4 Selection and use of cabling components . 12
A.4.5 Cabling planning documentation . 16
A.4.6 Verification of cabling planning specification . 16
A.5 Installation implementation. 16
A.5.1 General requirements . 16
A.5.2 Cable installation . 17
A.5.3 Connector installation . 17
A.5.4 Terminator installation . 18
A.5.5 Device installation . 18
A.5.6 Coding and labelling . 18
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 18
A.5.8 As-implemented cabling documentation . 19
A.6 Installation verification and installation acceptance test . 19
A.6.1 General . 19
A.6.2 Installation verification . 19
A.6.3 Installation acceptance test . 19
A.7 Installation administration . 20
A.8 Installation maintenance and installation troubleshooting . 20
Figure 1 – Standards relationships . 6
Table A.1 – Basic network characteristics for balanced cabling not based on Ethernet . 11
Table A.2 – Basic network characteristics for un-balanced cabling not based on
Ethernet . 12
Table A.3 – Information relevant to copper cable: fixed cables . 13
Table A.4 – Connectors for copper cabling CPs not based on Ethernet – twisted pair . 14
IEC 61784-5-22:2024 © IEC 2024 – 3 –
Table A.5 – Connectors for copper cabling CPs not based on Ethernet – Coaxial cable . 14
Table A.6 – Parameters for balanced cables – twisted pair . 17
Table A.7 – Parameters for un-balanced cables – coaxial cable . 17
– 4 – IEC 61784-5-22:2024 © IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL NETWORKS –
PROFILES –
Part 5-22: Installation of fieldbuses –
Installation profiles for CPF 22
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certificat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.