SIST EN 15085-1:2023
(Main)Railway applications - Welding of railway vehicles and components - Part 1: General
Railway applications - Welding of railway vehicles and components - Part 1: General
This document defines terms in the field of welding on railway vehicles and associated components. This document is applicable to all assemblies, sub-assemblies or parts welded by any welding process, either manual, partly mechanized, fully mechanized or automatic welding as defined in EN ISO 4063.
Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 1: Allgemeines
Dieses Dokument legt Begriffe im Bereich Schweißen an Schienenfahrzeugen und zugehörigen Bauteilen fest. Diese Europäische Norm ist anwendbar für alle Baugruppen und Unterbaugruppen, welche durch schweißtechnische Verfahren in manueller, teilweise oder vollständig mechanisierter oder automatisierter Anwendung nach EN ISO 4063 gefertigt werden.
Applications ferroviaires - Soudage des véhicules et des composants ferroviaires - Partie 1 : Généralités
Le présent document définit les termes utilisés dans le domaine du soudage des véhicules ferroviaires et des composants associés. Ce document est applicable à tous les ensembles, sous-ensembles ou pièces soudés par tout procédé de soudage, qu'il soit manuel, partiellement mécanisé, entièrement mécanisé ou automatique, tel que défini dans la norme EN ISO 4063.
Železniške naprave - Varjenje železniških vozil in njihovih delov - 1. del: Splošno
Ta dokument določa izraze na področju varjenja na železniških vozilih in povezanih sestavnih delih. Ta dokument se uporablja za vse sestave, podsestave ali dele, zvarjene s katerim koli varilnim postopkom, bodisi ročnim, delno mehaniziranim, popolnoma mehaniziranim ali samodejnim varjenjem, kot je opredeljeno v standardu EN ISO 4063.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15085-1:2023
01-september-2023
Železniške naprave - Varjenje železniških vozil in njihovih delov - 1. del: Splošno
Railway applications - Welding of railway vehicles and components - Part 1: General
Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 1:
Allgemeines
Applications ferroviaires - Soudage des véhicules et des composants ferroviaires - Partie
1 : Généralités
Ta slovenski standard je istoveten z: EN 15085-1:2023
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 15085-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15085-1:2023
---------------------- Page: 2 ----------------------
SIST EN 15085-1:2023
EN 15085-1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2023
EUROPÄISCHE NORM
ICS 25.160.10; 45.060.01 Supersedes EN 15085-1:2007+A1:2013
English Version
Railway applications - Welding of railway vehicles and
components - Part 1: General
Applications ferroviaires - Soudage des véhicules et des Bahnanwendungen - Schweißen von
composants ferroviaires - Partie 1 : Généralités Schienenfahrzeugen und -fahrzeugteilen - Teil 1:
Allgemeines
This European Standard was approved by CEN on 10 April 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15085-1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15085-1:2023
EN 15085-1:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 7
5 Other applicable regulations . 7
5.1 General . 7
5.2 Components produced by other industrial sectors . 7
Annex A (normative) Welding on tank wagons . 8
Bibliography . 9
2
---------------------- Page: 4 ----------------------
SIST EN 15085-1:2023
EN 15085-1:2023 (E)
European foreword
This document (EN 15085-1:2023) has been prepared by Technical Committee CEN/TC 256 “Railway
applications” the secreta
...
SLOVENSKI STANDARD
oSIST prEN 15085-1:2021
01-september-2021
Železniške naprave - Varjenje železniških vozil in njihovih delov - 1. del: Splošno
Railway applications - Welding of railway vehicles and components - Part 1: General
Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 1:
Allgemeines
Applications ferroviaires - Soudage des véhicules et des composants ferroviaires - Partie
1 : Généralités
Ta slovenski standard je istoveten z: prEN 15085-1
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
oSIST prEN 15085-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15085-1:2021
---------------------- Page: 2 ----------------------
oSIST prEN 15085-1:2021
DRAFT
EUROPEAN STANDARD
prEN 15085-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2021
ICS 25.160.10; 45.060.01 Will supersede EN 15085-1:2007+A1:2013
English Version
Railway applications - Welding of railway vehicles and
components - Part 1: General
Applications ferroviaires - Soudage des véhicules et des Bahnanwendungen - Schweißen von
composants ferroviaires - Partie 1: Généralités Schienenfahrzeugen und -fahrzeugteilen - Teil 1:
Allgemeines
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15085-1:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15085-1:2021
prEN 15085-1:2021 (E)
European foreword
This document (prEN 15085-1:2021) has been prepared by Technical Committee CEN/TC 256 “Railway
applications” the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 15085-1:2007+A1:2013.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association.
3
---------------------- Page: 4 ----------------------
oSIST prEN 15085-1:2021
prEN 15085-1:2021 (E)
Introduction
Welding is a special process in the manufacture of railway vehicles and their parts. The required
provisions for this process are laid down in the standards series EN ISO 3834. The basis of these
provisions is the basic technical welding standards with respect to the special requirements for the
construction of railway vehicles.
This series of standards applies to welding of metallic materials in the manufacture and maintenance of
railway vehicles and their parts.
It describes the control for the welding process for railway vehicles and their components for new
manufacture and maintenance.
With respect to the railway environment, this series of standards defines the quality requirements for
the welding manufacturer to undertake new building and repair work.
Components: parts and subassemblies are assigned a classification level, based on their safety relevance.
According to these levels, qualifications for welding personnel of the manufacturer are specified.
This series provides an essential link between the weld performance class defined during design, the
quality of the weld, and the demonstration of the required quali
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.