SIST EN 13374:2013/oprA1:2017

Temporary edge protection systems - Product specification - Test methods

This European Standard specifies the requirements and test methods for temporary edge protection systems for use during construction or maintenance of buildings and other structures.
This standard applies to edge protection systems for flat and inclined surfaces and specifies the requirements for three classes of temporary edge protection.
For edge protection systems with an arrest function (e.g. falling or sliding down a sloping roof) this standard specifies requirements for energy absorption.
This standard includes edge protection systems, some of which are fixed to the structure and others, which rely on gravity and friction on flat surfaces.
This standard does not provide requirements for edge protection systems intended for:
- protection against impact from vehicles or from other mobile equipment,
- protection from sliding down of bulk loose materials, snow etc,
- protection of areas accessible to the public.
This standard does not apply to side protection on scaffolds according to EN 12811-1 and EN 1004.
NOTE   This does not prevent these systems to be used on temporary structures, or enhance the protection provided on scaffolds defined under EN 12811-1 or EN 1004. If this is intended, additional testing will be carried out.

Temporäre Seitenschutzsysteme - Produktfestlegungen - Prüfverfahren

Garde-corps périphériques temporaires - Spécification du produit - Méthodes d'essai

Začasne ograje - Specifikacija proizvoda - Metode preskušanja

General Information

• Status: Not Published
• Public Enquiry End Date: 06-Sep-2017
• ICS: 13.340.99 - Other protective equipment
• ICS: 91.220 - Construction equipment
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 08-Oct-2019
• Due Date: 13-Oct-2019
• Completion Date: 08-Oct-2019
• Ref Project: EN 13374:2013/prA1:2017 - Temporary edge protection systems - Product specification - Test methods

Relations

• Consolidated By: SIST EN 13374:2013+A1:2019 - Temporary edge protection systems - Product specification - Test methods
• Effective Date: 18-Jan-2023
• Amends: SIST EN 13374:2013 - Temporary edge protection systems - Product specification - Test methods
• Effective Date: 10-Aug-2016
• Consolidated By: SIST EN 13374:2013+A1:2019 - Temporary edge protection systems - Product specification - Test methods
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 13374:2013+A1:2019 - Temporary edge protection systems - Product specification - Test methods
• Effective Date: 11-Dec-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13374:2013/oprA1:2017
01-september-2017
=DþDVQHRJUDMH6SHFLILNDFLMDSURL]YRGD0HWRGHSUHVNXãDQMD
Temporary edge protection systems - Product specification - Test methods
Temporäre Seitenschutzsysteme - Produktfestlegungen - Prüfverfahren
Garde-corps périphériques temporaires - Spécification du produit - Méthodes d'essai
Ta slovenski standard je istoveten z: EN 13374:2013/prA1
ICS:
13.340.99 Druga varovalna oprema Other protective equipment
91.220 Gradbena oprema Construction equipment
SIST EN 13374:2013/oprA1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13374:2013/oprA1:2017

---------------------- Page: 2 ----------------------

SIST EN 13374:2013/oprA1:2017


DRAFT
EUROPEAN STANDARD
EN 13374:2013
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
June 2017
ICS 13.340.99; 91.220
English Version

Temporary edge protection systems - Product
specification - Test methods
Garde-corps périphériques temporaires - Spécification Temporäre Seitenschutzsysteme -
du produit - Méthodes d'éssai Produktfestlegungen - Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 53.

This draft amendment A1, if approved, will modify the European Standard EN 13374:2013. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13374:2013/prA1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13374:2013/oprA1:2017
EN 13374:2013/prA1:2017 (E)
Contents Page
European foreword . 3
1 Modification to 5.2.1, Edge protection system class A . 4
2 Modification to 5.2.2, Edge protection system class B .
...