iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 45544-2:2004

(Main)

Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit values

Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit values

This European Standard specifies the performance requirements for electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours in workplace atmospheres. The standard test gas concentration (STGC) to be used for the tests are given in annex A of prEN 45544-1. In the instances in which no STGC is assigned in 5.6 of prEN 45544-1:1998, a STGC may be agreed between the manufacturer and test laboratory considering the National limit values.

Arbeitsplatzatmosphäre - Elektrische Geräte für die direkte Detektion und direkte Konzentrationsmessung toxischer Gase

Diese Europäische Norm legt die Anforderungen an das Betriebsverhalten elektrischer Geräte für die direkte Detektion und direkte Konzentrationsmessung toxischer Gase und Dämpfe in der Arbeitsplatzatmosphäre fest. Die Standardprüfgaskonzentration für die Prüfungen sind im Anhang A von prEN 45544-1 aufgeführt. In den Fällen, in denen in 5.6 von prEN 45544-1 keine Standardprüfgaskonzentration festgelegt ist, darf ein Standardprüfgaskonzentration zwischen dem Hersteller und dem Prüflabor unter Berücksichtigung der nationalen Grenzwerte vereinbart werden.

Atmospheres des lieux de travail - Appareillage électrique utilisé pour la détection directe des vapeurs et gaz toxiques et le mesurage direct de leur concentration - Partie 2: Exigences de performance pour les appareillages utilisés pour le mesurage des concentrations de l'ordre des valeurs limites

La présente norme européenne spécifie les performances requises pour les appareillages électriques utilisés pour la détection directe des vapeurs et gaz polluants et le mesurage direct de leur concentration dans l'atmosphere des lieux de travail. Les concentrations de gaz d'essai de référence (CGER) a utiliser pour les essais sont indiquées dans l'annexe A du prEN 45544-1. Dans tous les cas ou aucune valeur de CGER n'est indiquée au paragraphe 5.6 de l'EN 45544-1:1998, le fabricant et le laboratoire d'essai peuvent définir une CGER d'un commun accord, en tenant compte des valeurs limites nationales.

Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit values

General Information

Status
Withdrawn
Publication Date
31-Dec-2003
Withdrawal Date
30-Jan-2018
ICS
13.040.30 - Workplace atmospheres
13.320 - Alarm and warning systems
Technical Committee
I10 - Imaginarni 10 za neaktivna TDT na elektro področju
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
30-Jan-2018
Due Date
22-Feb-2018
Completion Date
31-Jan-2018
Ref Project
EN 45544-2:1999 - Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit values

Buy Standard

EN 45544-2:2004EN 45544-2:2004
PreviousNext
Standard
EN 45544-2:2004
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit valuesArbeitsplatzatmosphäre - Elektrische Geräte für die direkte Detektion und direkte Konzentrationsmessung toxischer GaseAtmospheres des lieux de travail - Appareillage électrique utilisé pour la détection directe des vapeurs et gaz toxiques et le mesurage direct de leur concentration - Partie 2: Exigences de performance pour les appareillages utilisés pour le mesurage des concentrations de l'ordre de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 45544-4:2016(Main)
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
EN 45544-4:2016

This European Standard gives guidance on the selection, installation, use and maintenance of electrical
apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours in
workplace atmospheres. The primary purpose of such apparatus is to measure the concentration of a toxic
gas or vapour in order to provide an exposure measurement and/or detection and warning of its presence.
This European Standard is applicable to apparatus whose primary purpose is to provide an indication, alarm
and/or other output function to give a warning of the presence of a toxic gas or vapour in the atmosphere and
in some cases to initiate automatic or manual protective actions. It is applicable to apparatus in which the
sensor automatically generates an electrical signal when gas is present.
This European Standard is not applicable, but may provide useful information, for apparatus
— used for the measurement of oxygen,
— used only in laboratories for analysis or measurement,
— used only for process measurement purposes,
— used in car parks or tunnels (fixed apparatus only),
— used in the domestic environment,
— used in environmental air pollution monitoring,
— used for the measurement of combustible gases and vapours related to the risk of explosion.
It also does not apply to open-path (line of sight) area monitors.
For apparatus used for sensing the presence of multiple gases, this European Standard applies only to the
detection of toxic gas or vapour.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45544-1:2015(Main)
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
EN 45544-1:2015

This European Standard specifies general requirements and test methods for the determination of the performance characteristics of personal, portable, transportable and fixed, continuous duty electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours in workplace atmospheres.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45544-3:2015(Main)
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection
EN 45544-3:2015

This European Standard specifies the performance requirements for electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours in workplace atmospheres.
This European Standard is applicable to apparatus used for general gas detection.
EXAMPLE Safety warning and leak detection are examples of general gas detection.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45544-2:2015(Main)
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement
EN 45544-2:2015

This European Standard specifies the performance requirements outlined in EN 482 specifically for electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours in workplace atmospheres.
This European Standard is applicable to apparatus used for exposure measurement.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62990-1:2023/A11:2023(Amendment)
Workplace Atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases
EN IEC 62990-1:2022/A11:2022

This part of IEC 62990 specifies general requirements for design, function and performance, and describes the test methods that apply to portable, transportable, and fixed equipment for the detection and concentration measurement of toxic gases and vapours in workplace atmospheres and other industrial and commercial applications. This document is applicable to continuously sensing equipment whose primary purpose is to provide an indication, alarm and/or other output function the purpose of which is to indicate the presence of a toxic gas or vapour in the atmosphere and in some cases to initiate automatic or manual protective action(s). It is applicable to equipment in which the sensor generates an electrical signal when gas is present.
This document applies to two types of equipment:
• Type HM (Health Monitoring) ‘occupational exposure’ equipment: For occupational exposure measurement, the performance requirements are focused on uncertainty of measurement of gas concentrations in the region of Occupational Exposure Limit Values (OELV). The upper limit of measurement will be defined by the manufacturer in accordance with 4.2.1.
• Type SM (Safety Monitoring) ‘general gas detection’ equipment: For general gas detection applications (e.g. safety warning, leak detection), the performance requirements are focused on alarm signalling. The upper limit of measurement will be defined by the manufacturer according to the intended use of the equipment. In general, the requirements for accuracy will be higher for Type HM equipment than for Type SM equipment. The same equipment may meet the requirements of both Type HM and Type SM. For equipment used for sensing the presence of multiple gases this document applies only to the detection of toxic gas or vapour.
This document is not applicable to equipment:
- with samplers and concentrators such as sorbents or paper tape having an irreversible indication;
- used for the measurement of gases and vapours related to the risk of explosion;
- used for the measurement of oxygen; – used only in laboratories for analysis or measurement;
- used only for process measurement purposes;
- used in the domestic environment;
- used in environmental air pollution monitoring;
- used for open-path (line of sight) area gas measurement;
- used for ventilation control in car parks or tunnels.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62990-1:2023(Main)
Workplace atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases (IEC 62990-1:2019 + COR1:2019)
EN IEC 62990-1:2022

This part of IEC 62990 specifies general requirements for design, function and performance, and describes the test methods that apply to portable, transportable, and fixed equipment for the detection and concentration measurement of toxic gases and vapours in workplace atmospheres and other industrial and commercial applications. This document is applicable to continuously sensing equipment whose primary purpose is to provide an indication, alarm and/or other output function the purpose of which is to indicate the presence of a toxic gas or vapour in the atmosphere and in some cases to initiate automatic or manual protective action(s). It is applicable to equipment in which the sensor generates an electrical signal when gas is present.
This document applies to two types of equipment:
- Type HM (Health Monitoring) ‘occupational exposure’ equipment: For occupational exposure measurement, the performance requirements are focused on uncertainty of measurement of gas concentrations in the region of Occupational Exposure Limit Values (OELV). The upper limit of measurement will be defined by the manufacturer in accordance with 4.2.1.
- Type SM (Safety Monitoring) ‘general gas detection’ equipment: For general gas detection applications (e.g. safety warning, leak detection), the performance requirements are focused on alarm signalling. The upper limit of measurement will be defined by the manufacturer according to the intended use of the equipment. In general, the requirements for accuracy will be higher for Type HM equipment than for Type SM equipment. The same equipment may meet the requirements of both Type HM and Type SM. For equipment used for sensing the presence of multiple gases this document applies only to the detection of toxic gas or vapour.
This document is not applicable to equipment:
- with samplers and concentrators such as sorbents or paper tape having an irreversible indication;
- used for the measurement of gases and vapours related to the risk of explosion;
- used for the measurement of oxygen; – used only in laboratories for analysis or measurement;
- used only for process measurement purposes;
- used in the domestic environment;
- used in environmental air pollution monitoring;
- used for open-path (line of sight) area gas measurement;
- used for ventilation control in car parks or tunnels.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62990-2:2021(Main)
Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours (IEC 62990-2:2021)
EN IEC 62990-2:2021

This document gives guidance on the selection, installation, use and maintenance of electrical
equipment used for the measurement of toxic gases and vapours in workplace atmospheres.
The primary purpose of such equipment is to ensure safety of personnel and property by
providing an indication of the concentration of a toxic gas or vapour and warning of its presence.
This document is applicable to equipment whose purpose is to provide an indication, alarm or
other output function to give a warning of the presence of a toxic gas or vapour in the
atmosphere and in some cases to initiate automatic or manual protective actions. It is applicable
to equipment in which the sensor automatically generates an electrical signal when gas is
present.
For the purposes of this document, equipment includes:
a) fixed equipment;
b) transportable equipment, and
c) portable equipment.
This document is intended to cover equipment defined within IEC 62990-1, but can provide
useful information for equipment not covered by that document.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45544-4:2016(Main)
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
EN 45544-4:2016

This European Standard gives guidance on the selection, installation, use and maintenance of electrical
apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours in
workplace atmospheres. The primary purpose of such apparatus is to measure the concentration of a toxic
gas or vapour in order to provide an exposure measurement and/or detection and warning of its presence.
This European Standard is applicable to apparatus whose primary purpose is to provide an indication, alarm
and/or other output function to give a warning of the presence of a toxic gas or vapour in the atmosphere and
in some cases to initiate automatic or manual protective actions. It is applicable to apparatus in which the
sensor automatically generates an electrical signal when gas is present.
This European Standard is not applicable, but may provide useful information, for apparatus
— used for the measurement of oxygen,
— used only in laboratories for analysis or measurement,
— used only for process measurement purposes,
— used in car parks or tunnels (fixed apparatus only),
— used in the domestic environment,
— used in environmental air pollution monitoring,
— used for the measurement of combustible gases and vapours related to the risk of explosion.
It also does not apply to open-path (line of sight) area monitors.
For apparatus used for sensing the presence of multiple gases, this European Standard applies only to the
detection of toxic gas or vapour.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45544-1:2015(Main)
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
EN 45544-1:2015

This European Standard specifies general requirements and test methods for the determination of the performance characteristics of personal, portable, transportable and fixed, continuous duty electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours in workplace atmospheres.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45544-3:2015(Main)
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection
EN 45544-3:2015

This European Standard specifies the performance requirements for electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours in workplace atmospheres.
This European Standard is applicable to apparatus used for general gas detection.
EXAMPLE Safety warning and leak detection are examples of general gas detection.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day