Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service

This European Standard specifies the requirements for the design, manufacture and testing of bursting disc safety devices for cryogenic service, i.e. for operation with cryogenic fluids below - 10 °C in addition to operation at ambient temperature. It is a requirement of this standard that the bursting disc safety device(s) comply with prEN ISO 4126-2. In the event of different requirements, this standard takes precedence over that standard.
This standard is restricted to bursting disc safety devices not exceeding a size of DN 100 designed to relieve single phase vapours or gases. A bursting disc assembly can be specified, constructed and tested such that it is suitable for  use with more than one gas or with mixtures of gases.
NOTE   This standard does not provide methods for determining the capacity of bursting disc safety devices for a particular cryogenic vessel. Such methods are provided in prEN 13648-3.

Kryo-Behälter - Sicherheitseinrichtungen gegen Drucküberschreitung - Teil 2: Berstscheibeneinrichtungen

Diese Europäische Norm legt Anforderungen für die Konstruktion, Herstellung und die Prüfung von Berstscheibeneinrichtungen für den Kryo-Betrieb fest, z. B. für den Betrieb mit tiefkalten Fluiden unter - 10 °C, in Ergänzung zu dem Betrieb bei Umgebungstemperaturen. Diese Norm fordert, dass die Berstscheibeneinrichtungen der prEN ISO 4126-2 entsprechen. Im Streitfall gelten die Anforderungen in dieser Norm vorrangig
Diese Norm beschränkt sich auf Berstscheibeneinrichtungen, die eine Nennweite von DN 100 nicht überschreiten und für Einzelgase und Dämpfe konstruiert sind und zur Anwendung bei den verschiedenen Gasen und Gasgemischen geeignet sein dürfen.
ANMERKUNG   Diese Norm sieht keine Verfahren zur Bestimmung des Ausflusses von Berstscheibeneinrichtungen eines bestimmten Behälters vor; diese Verfahren sind in prEN 13648-3 vorgesehen.

Récipients cryogéniques - Dispositifs de protection contre les supressions - Partie 2: Dispositif de sécurité a disque de rupture pour service cryogénique

La présente norme spécifie les exigences relatives a la conception, a la fabrication et aux essais de dispositifs a disque de rupture pour usage cryogénique, c'est-a-dire destinés a fonctionner avec des fluides cryogéniques a une température inférieure a -10 °C ainsi qu'a température ambiante. La présente norme exige que le ou les dispositifs a disque de rupture soient conformes au prEN ISO 4126-2. En cas d'exigences contradictoires, les exigences de la présente norme l'emportent sur celles de la norme susmentionnée.

Kriogene posode - Varnostna oprema proti prekoračitvi tlaka - 2. del: Varnostne membrane za kriogeno področje

General Information

Status
Published
Publication Date
31-Oct-2002
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Nov-2002
Due Date
01-Nov-2002
Completion Date
01-Nov-2002

Buy Standard

Standard
SIST EN 13648-2:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kryo-Behälter - Sicherheitseinrichtungen gegen Drucküberschreitung - Teil 2: BerstscheibeneinrichtungenRécipients cryogéniques - Dispositifs de protection contre les supressions - Partie 2: Dispositif de sécurité a disque de rupture pour service cryogéniqueCryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service23.020.40Proti mrazu odporne posode (kriogenske posode)Cryogenic vessels13.240Varstvo pred previsokim tlakomProtection against excessive pressureICS:Ta slovenski standard je istoveten z:EN 13648-2:2002SIST EN 13648-2:2002en01-november-2002SIST EN 13648-2:2002SLOVENSKI

STANDARD
SIST EN 13648-2:2002

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13648-2May 2002ICS 23.060.40English versionCryogenic vessels - Safety devices for protection againstexcessive pressure - Part 2: Bursting disc safety devices forcryogenic serviceRécipients cryogéniques - Dispositifs de protection contreles supressions - Partie 2: Dispositif de sécurité à disquede rupture pour service cryogéniqueKryo-Behälter - Sicherheitseinrichtungen gegenDrucküberschreitung - Teil 2: BerstscheibeneinrichtungenThis European Standard was approved by CEN on 5 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13648-2:2002 ESIST EN 13648-2:2002

EN 13648-2:2002 (E)2ContentspageForeword......................................................................................................................................................................31Scope..............................................................................................................................................................42Normative references....................................................................................................................................43Terms and definitions....................................................................................................................................54Requirements.................................................................................................................................................54.1General............................................................................................................................................................54.2Design.............................................................................................................................................................54.2.1Design temperature.......................................................................................................................................54.2.2Coincident temperature.................................................................................................................................54.2.3Sublimating cryogens...................................................................................................................................64.3Materials..........................................................................................................................................................64.3.1General............................................................................................................................................................64.3.2Metallic materials...........................................................................................................................................64.3.3Corrosion resistance.....................................................................................................................................64.3.4Oxygen compatibility.....................................................................................................................................64.3.5Acetylene compatibility.................................................................................................................................64.3.6Non-metallic materials...................................................................................................................................65Production testing.........................................................................................................................................75.1Pressure and burst tests...............................................................................................................................75.2Additional tests for bursting disc safety devices with non-replaceable bursting discassemblies......................................................................................................................................................75.2.1Leak tests........................................................................................................................................................75.2.2Visual examination........................................................................................................................................76Cleanliness.....................................................................................................................................................77Marking...........................................................................................................................................................78Prevention of substitution............................................................................................................................7Annex ZA (informative)

Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives..........................................................................................................................8SIST EN 13648-2:2002

EN 13648-2:2002 (E)3ForewordThis document (EN 13648-2:2002) has been prepared by Technical Committee CEN/TC 268 "Cryogenic vessels",the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latestby November 2002.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.This document also supports the objectives of the framework Directives on Transport of Dangerous Goods. Thisstandard has been submitted for reference into the RID and/or the technical annexes of the ADR.This European Standard is composed of the following Parts :EN 13648-1, Cryogenic vessels – Safety devices for protection against excessive pressure – Part 1 : Safety valvesfor cryogenic service ;EN 13648-2, Cryogenic vessels – Safety devices for protection against excessive pressure – Part 2 : Bursting discssafety devices for cryogenic service ;prEN 13648-3, Cryogenic vessels – Safety devices for protection against excessive pressure – Part 3 :Determination of required discharge - Capacity and sizing.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13648-2:2002

EN 13648-2:2002 (E)41 ScopeThis European Standard specifies the requirements for the design, manufacture and testing of bursting disc safetydevices for cryogenic service, i.e. for operation with cryogenic fluids below – 10 °C in addition to operation atambient temperature. It is a requirement of this standard that the bursting disc safety device(s) complywith prEN ISO 4126-2. In the event of different requirements, this standard takes precedence over that standard.This standard is restricted to bursting disc safety devices not exceeding a size of DN 100 designed to relieve singlephase vapours or gases. A bursting disc assembly can be specified, constructed and tested such that it is suitablefor

use with more than one gas or with mixtures of gases.NOTEThis standard does not provide methods for determining the capacity of bursting disc safety devices for a particularcryogenic vessel. Such methods are provided in prEN 13648-3.2 Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed he

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.