LED light source characteristics - Part 1: Data sheets (IEC 63356-1:2023)

IEC 63356-1:2023 specifies data sheets of LED lamps and LED modules with a series of parameters per data sheet for a specific LED light source that enables interchangeability between products from different LED light source manufacturers.
This second edition cancels and replaces the first edition published in 2022. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of datasheets for GH36d capped LED lamps;
b) addition of datasheets for GJ6.6t and GJ6.6d-1 capped LED lamps;
c) addition of datasheets for GR6d capped LED lamps.

Eigenschaften von LED-Lichtquellen - Teil 1: Datenblätter (IEC 63356-1:2023)

Caractéristiques de source lumineuse à LED – Partie 1: Feuilles de caractéristiques (IEC 63356-1:2023)

L'IEC 63356-1:2023 spécifie les feuilles de caractéristiques des lampes à LED et des modules de LED à l'aide d'une série de paramètres par feuille de caractéristiques pour une source lumineuse à LED spécifique qui permet l'interchangeabilité entre les produits de différents fabricants de source lumineuse à LED.
Cette deuxième édition annule et remplace la première édition parue en 2022. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout des feuilles de caractéristiques pour les lampes à LED à culots GH36d;
b) ajout des feuilles de caractéristiques pour les lampes à LED à culots GJ6.6t et GJ6.6d-1;
c) ajout des feuilles de caractéristiques pour les lampes à LED à culots GR6d.

Značilnosti LED-svetlobnega vira - 1. del: Preglednice (IEC 63356-1:2023)

Standard IEC 63356-1:2023 določa preglednice LED-sijalk in LED-modulov z nizom parametrov na posamezno preglednico za določen LED-svetlobni vir, ki omogoča zamenljivost med izdelki različnih proizvajalcev LED-svetlobnih virov.
Druga izdaja razveljavlja in nadomešča prvo izdajo, objavljeno leta 2022. Ta izdaja je tehnično popravljena izdaja.
Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
a) dodatne preglednice za LED-sijalke z vznožki GH36d;
b) dodatne preglednice za LED-sijalke z vznožki GJ6.6t in GJ6.6d-1;
c) dodatne preglednice za LED-sijalke z vznožki GR6d.

General Information

Status
Published
Public Enquiry End Date
31-Mar-2023
Publication Date
16-Nov-2023
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Nov-2023
Due Date
20-Jan-2024
Completion Date
17-Nov-2023

Relations

Buy Standard

Standard
EN IEC 63356-1:2024
English language
54 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN IEC 63356-1:2023/oprA1:2023
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63356-1:2024
01-januar-2024
Značilnosti LED-svetlobnega vira - 1. del: Preglednice (IEC 63356-1:2023)
LED light source characteristics - Part 1: Data sheets (IEC 63356-1:2023)
Eigenschaften von LED-Lichtquellen - Teil 1: Datenblätter (IEC 63356-1:2023)
Caractéristiques de source lumineuse à LED Partie 1: Feuilles de caractéristiques (IEC
63356-1:2023)
Ta slovenski standard je istoveten z: EN IEC 63356-1:2023
ICS:
29.140.01 Žarnice na splošno Lamps in general
SIST EN IEC 63356-1:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63356-1:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 63356-1:2024


EUROPEAN STANDARD EN IEC 63356-1

NORME EUROPÉENNE

EUROPÄISCHE NORM November 2023
ICS 29.140.99 Supersedes EN IEC 63356-1:2022
English Version
LED light source characteristics - Part 1: Data sheets
(IEC 63356-1:2023)
Caractéristiques de source lumineuse à LED - Partie 1: Eigenschaften von LED-Lichtquellen - Teil 1: Datenblätter
Feuilles de caractéristiques (IEC 63356-1:2023)
(IEC 63356-1:2023)
This European Standard was approved by CENELEC on 2023-10-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63356-1:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63356-1:2024
EN IEC 63356-1:2023 (E)
European foreword
The text of document 34A/2363/FDIS, future IEC 63356-1, prepared by SC 34A "Electric light sources"
of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 63356-1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-07-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-10-24
document have to be withdrawn

This document supersedes EN IEC 63356-1:2022 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63356-1:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60061-1 NOTE Approved as EN 60061-1
IEC 60061-2 NOTE Approved as EN 60061-2
IEC 63356-2 NOTE Approved as EN IEC 63356-2


2

---------------------- Page: 4 ----------------------
SIST EN IEC 63356-1:2024




IEC 63356-1

®


Edition 2.0 2023-09




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE











LED light source characteristics –

Part 1: Data sheets



Caractéristiques de source lumineuse à LED –

Partie 1: Feuilles de caractéristiques















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE





ICS 29.140.99  ISBN 978-2-8322-7475-0




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous as
...

SLOVENSKI STANDARD
SIST EN IEC 63356-1:2023/oprA1:2023
01-marec-2023
Značilnosti LED-svetlobnega vira - 1. del: Preglednice - Dopolnilo A1
Amendment 1 - LED light source characteristics - Part 1: Data sheets
Eigenschaften von LED-Lichtquellen - Teil 1: Datenblätter
Caractéristiques de source lumineuse à LED Partie 1: Feuilles de caractéristiques
Ta slovenski standard je istoveten z: EN IEC 63356-1:2022/prA1:2023
ICS:
29.140.01 Žarnice na splošno Lamps in general
SIST EN IEC 63356-1:2023/oprA1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63356-1:2023/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 63356-1:2023/oprA1:2023
34A/2319/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63356-1/AMD1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-01-13 2023-04-07
SUPERSEDES DOCUMENTS:
34A/2294/CD, 34A/2317/CC

IEC SC 34A : ELECTRIC LIGHT SOURCES
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

TC 34,SC 34B,SC 34C,SC 34D
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Amendment 1 - LED light source characteristics - Part 1: Data sheets

PROPOSED STABILITY DATE: 2026

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing
National Committee positions. You may not copy or "mirror" the file or printed version of the document, or any
part of it, for any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
SIST EN IEC 63356-1:2023/oprA1:2023
IEC CDV 63356-1 © IEC 2022 2 34A/2319/CDV

1 Proposal to amend IEC 63356-1 clause 4.1 as follows:
2 Replace “Unless otherwise specified, mechanical dimensions refer to a temperature of (25 ±
3 5) °C.” by “Unless otherwise specified, dimensions are specified at a temperature of (25 ± 5) °C.”
4 Proposal to amend IEC 63356-1 data sheet table structure as follows:
5 Clause 4.3.1: Add the following introductory text
6 Tables 1A, 1B and 1C provide a summary of data sheets for non-integrated, semi-integrated
7 and integrated single-capped LED lamps respectively.
8 Clause 4.3.1: Add the following table caption placeholders
9 Table 1B – List of data sheets for semi-integrated single-capped LED lamps
10 Void
11 Table 1C – List of data sheets for integrated single-capped LED lamps
12 Void
13 Clause 4.3.2: Add the following introductory text
14 Tables 2A, 2B and 2C provide a summary of data sheets for non-integrated, semi-integrated
15 and integrated double-capped LED lamps respectively.
16 Clause 4.3.2: Replace existing Table 1 with the following Table 2A
17 Table 2A – List of data sheets for non-integrated double-capped LED lamps
Sheet no. Shape Nominal Rated Rated Power range Cap
63356-1-IEC- length diameter current W
2xx-xxxx mm mm
200-0001-1 linear 600 25,5 0,35 A DC 7,9 to 16,6 GX16t-5
200-0002-1 linear 600 32,5 0,35 A DC 7,9 to 16,6 GX16t-5
200-0003-1 linear 900 25,5 0,35 A DC 11,0 to 24,8 GX16t-5
200-0004-1 linear 900 32,5 0,35 A DC 11,0 to 24,8 GX16t-5
200-0005-1 linear 1 200 25,5 0,35 A DC 14,3 to 33,3 GX16t-5
200-0006-1 linear 1 200 32,5 0,35 A DC 14,3 to 33,3 GX16t-5
200-0007-1 linear 1 500 25,5 0,35 A DC 14,3 to 42,0 GX16t-5
200-0008-1 linear 1 500 32,5 0,35 A DC 14,3 to 42,0 GX16t-5
200-0009-1 linear 2 400 25,5 0,35 A DC 28,7 to 66,5 GX16t-5
200-0010-1 linear 2 400 32,5 0,35 A DC 28,7 to 66,5 GX16t-5
18
19 Clause 4.3.2: Add the following table caption placeholder
20 Table 2B – List of data sheets for semi-integrated double-capped LED lamps
21 Void
22 Clause 4.3.3: Add the following introductory text
23 Tables 3A, 3B and 3C provide a summary of data sheets for non-integrated, semi-integrated
24 and integrated LED modules respectively.
25 Clause 4.3.3: Add the following table caption placeholders
26 Table 3A – List of data sheets for non-integ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.