prEN ISO 15614-2

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2022)

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 2: Lichtbogenschweißen von Aluminium und seinen Legierungen (ISO/DIS 15614‑2:2022)

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 2: Soudage à l'arc de l'aluminium et de ses alliages (ISO/DIS 15614-2:2022)

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega postopka - 2. del: Obločno varjenje aluminija in njegovih zlitin (ISO/DIS 15614-2:2022)

General Information

• Status: Not Published
• Publication Date: 21-Apr-2024
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 21-Aug-2023
• Completion Date: 21-Aug-2023
• Directive: 2014/29/EU - Directive 2014/29/EU of The European Parliament and of the Council of 26 February 2016 on the harmonisation of the laws of the Member States relating to the making available on the market of simple pressure vessels
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/601 - COMMISSION IMPLEMENTING DECISION of 1.3.2024 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards pressure equipment and assemblies in support of Directive 2014/68/EU of the European Parliament and of the Council
• Mandate: M/602 - COMMISSION IMPLEMENTING DECISION on a standardisation request to the European Committee for Standardization as regards simple pressure vessels in support of Directive 2014/29/EU of the European Parliament and of the Council
• Mandate: M/BC/CEN/89/2 - Standardization mandate to CEN concerning supporting standards in the context of pressure vessels
• Ref Project: oSIST prEN ISO 15614-2:2022 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2022)

Relations

• Revises: EN ISO 15614-2:2005 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
• Effective Date: 19-Jan-2023
• Revises: EN ISO 15614-2:2005/AC:2009 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005/Cor 2:2009)
• Effective Date: 09-Feb-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2022
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega
postopka - 2. del: Obločno varjenje aluminija in njegovih zlitin (ISO/DIS 15614-
2:2022)
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2022)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 2: Lichtbogenschweißen von Aluminium und seinen
Legierungen (ISO/DIS 15614‑2:2022)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 2:
Soudage à l'arc de l'aluminium et de ses alliages (ISO/DIS 15614-2:2022)
Ta slovenski standard je istoveten z: prEN ISO 15614-2
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO/DIS 15614-2
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-06-06 2022-08-29
Specification and qualification of welding procedures for
metallic materials — Welding procedure test —
Part 2:
Arc welding of aluminium and its alloys
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de
qualification d'un mode opératoire de soudage —
Partie 2: Soudage à l'arc de l'aluminium et de ses alliages
ICS: 25.160.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15614-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

ISO/DIS 15614-2:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO/DIS 15614-2:2022(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Preliminary welding procedure specification (pWPS) .3
5 Welding procedure test .3
6 Test piece .3
6.1 General . 3
6.2 Shape and dimensions of test pieces . 3
6.2.1 General . 3
6.2.2 Butt joint in plate with full penetration . 3
6.2.3 Butt joint in pipe with full penetration . 4
6.2.4 T-joint . . . 4
6.2.5 Branch connection and fillet weld on pipe . 6
6.3 Welding of test pieces . 6
7 Examination and testing .7
7.1 Extent of testing . 7
7.2 Location of test specimens . 7
7.3 Non-destructive testing . 10
7.4 Destructive tests . 11
7.4.1 General . 11
7.4.2 Transverse tensile test . 11
7.4.3 Bend test .12
7.4.4 Fracture test .13
7.4.5 Macroscopic/Microscopic examination .13
7.5 Acceptance levels . 14
7.6 Re-testing . 14
8 Range of qualification .14
8.1 General . 14
8.2 Related to the manufacturer . 14
8.3 Related to the parent material . 14
8.3.1 Parent material grouping . 14
8.3.2 Parent material thickness and pipe diameter . 15
8.3.3 Angle of branch connection . 18
8.4 Common to all welding procedures . 18
8.4.1 Welding process . 18
8.4.2 Welding positions . 18
8.4.3 Type of joint . 18
8.4.4 Filler metal, designation . 19
8.4.5 Type of current . . 19
8.4.6 Heat Input . 19
8.4.7 Preheat temperature . 19
8.4.8 Interpass temperature . 20
8.4.9 Post-weld heat treatment or ageing . 20
8.5 Specific to processes. 20
8.5.1 Process 131 .20
8.5.2 Process 141 . 20
8.5.3 Process 15 . 20
9 Welding procedure qualification record (WPQR).20
iii
ISO/DIS 15614-2:2022(E)
Annex A (informative) Example Welding Procedure Qualification Record form (WPQR) .21
Bibliography .24
iv
ISO/DIS 15614-2:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified
...