Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics

This document, part of EN 13130, specifies an analytical procedure for the determination of carbonyl chloride monomer in polymers. The method is applicable to polycarbonate as well as to other polymers and copolymers where these are soluble in methylene chloride. The level of carbonyl chloride monomer determined is expressed as milligrams of carbonyl chloride per kilogram of polymer. The method is appropriate for the quantitative determination of carbonyl chloride at a minimum level of 0,3 mg per kilogram of polymer.

Werkstoffe und Gegenstände in Kontakt mit Lebensmitteln - Substanzen in Kunststoffen, die Beschränkungen unterliegen - Teil 17: Bestimmung von Carbonylchlorid in Kunststoffen

Dieses Dokument, Teil der EN 13130, legt ein Analyseverfahren zur Bestimmung von monomerem Carbonylchlorid in Polymeren fest. Das Verfahren ist anwendbar auf Polycarbonate sowie andere Polymere und Copolymere, wenn diese in Methylenchlorid löslich sind. Der ermittelte Gehalt an monomerem Carbonylchlorid wird in Milligramm Carbonylchlorid je Kilogramm Polymer angegeben. Das Verfahren eignet sich zur quantitativen Bestimmung von Carbonylchlorid bei einem Mindestgehalt von 0,3 mg je Kilogramm Polymer.

Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 17: Détermination du chlorure de carbonyle dans les matières plastiques

Le présent document qui fait partie de l'EN 13030, spécifie un mode opératoire d'analyse pour la détermination du chlorure de carbonyle dans les polymères. Cette méthode peut être appliquée au polycarbonate ainsi qu'aux autres polymères ou copolymères solubles dans le chlorure de méthylène. La quantité de chlorure de carbonyle déterminée est exprimée en milligrammes de chlorure de carbonyle par kilogramme de polymère. Cette méthode convient pour la détermination quantitative du chlorure de carbonyle pour des concentrations minimales de 0,3 mg par kilogramme de polymère.

Materiali in predmeti v stiku z živili - Snovi v polimernih materialih, katerih koncentracija je omejena - 17. del: Določevanje karbonilklorida (fosgena) v polimernih materialih

General Information

Status
Published
Publication Date
22-Feb-2005
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
23-Feb-2005
Completion Date
23-Feb-2005

Buy Standard

Technical specification
TS CEN/TS 13130-17:2005
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 13130-17:2005
01-april-2005
0DWHULDOLLQSUHGPHWLYVWLNX]åLYLOL6QRYLYSROLPHUQLKPDWHULDOLKNDWHULK
NRQFHQWUDFLMDMHRPHMHQDGHO'RORþHYDQMHNDUERQLONORULGD IRVJHQD Y
SROLPHUQLKPDWHULDOLK
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation
- Part 17: Determination of carbonyl chloride in plastics
Werkstoffe und Gegenstände in Kontakt mit Lebensmitteln - Substanzen in Kunststoffen,
die Beschränkungen unterliegen - Teil 17: Bestimmung von Carbonylchlorid in
Kunststoffen
Matériaux et objets en contact avec les denrées alimentaires - Substances dans les
matieres plastiques soumises a des limitations - Partie 17: Détermination du chlorure de
carbonyle dans les matieres plastiques
Ta slovenski standard je istoveten z: CEN/TS 13130-17:2005
ICS:
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
SIST-TS CEN/TS 13130-17:2005 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 13130-17:2005

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 13130-17:2005
TECHNICAL SPECIFICATION
CEN/TS 13130-17
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
February 2005
ICS 67.250
English version
Materials and articles in contact with foodstuffs - Plastics
substances subject to limitation - Part 17: Determination of
carbonyl chloride in plastics
Matériaux et objets en contact avec les denrées Werkstoffe und Gegenstände in Kontakt mit Lebensmitteln
alimentaires - Substances dans les matières plastiques - Substanzen in Kunststoffen, die Beschränkungen
soumises à des limitations - Partie 17: Détermination du unterliegen - Teil 17: Bestimmung von Carbonylchlorid in
chlorure de carbonyle dans les matières plastiques Kunststoffen
This Technical Specification (CEN/TS) was approved by CEN on 16 December 2004 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 13130-17:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 13130-17:2005
CEN/TS 13130-17:2005 (E)
Contents
page
Foreword. 3
Introduction . 5
1 Scope. 6
2 Normative references . 6
3 Principle . 6
4 Reagents . 6
5 Apparatus . 8
6 Samples . 9
7 Procedure . 11
8 Precision .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.