EN 13481-7:2012

Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails

This European Standard specifies performance requirements for special fastening systems, in categories A - E as specified in EN 13481-1:2012, 3.1, for switches and crossings and check rails. These types of rails are those which are secured within the overall fastening system (not independently fixed to the bearers) on wood, concrete and steel bearers, in ballasted track and on slab track, and which have maximum axle loads and minimum curve radii in divergent track in accordance with Table 1.
Table 1 - Fastening category criteria
Category   Maximum design axle load   Minimum curve radius
   kN   m
A   130   40
B   180   80
C   260   150
D   260   400
E   350   150
NOTE   The maximum axle load for categories A and B does not apply to maintenance vehicles.
The requirements apply to fastening systems which incorporate a resilient element and act on the foot and/or web of the rail and which are intended for use with stock rail sections described in EN 13674-1 (excluding 49E4) and EN 13674-4+A1.
This standard is not applicable to rigid fastening systems.
This standard is for type approval of a complete fastening assembly only. Requirements for quality control are included in the standards applicable to individual components.

Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 7: Spezielle Befestigungssysteme für Weichen und Kreuzungen sowie Führungsschienen

Diese Europäische Norm legt Leistungsanforderungen an besondere Schienenbefestigungssysteme in den Kategorien A – E, wie in EN 13481-1:2012, 3.1, beschrieben, für Weichen und Kreuzungen und Führungsschienen, die innerhalb des gesamten Befestigungssystems (nicht selbstständig auf den Weichenschwellen) auf Holz-, Beton- und Stahlträgern montiert sind und im Schottergleis und auf festen Fahrbahnen angebracht sind mit den maximalen Auslegungsachslasten und Mindest-Gleisbogenhalbmessern nach Tabelle 1 fest.
Die Anforderungen gelten für Befestigungssysteme, die ein Federelement enthalten und am Fuß und/oder Schienensteg wirken und vorgesehen sind für die Verwendung mit Backenschienenprofilen nach EN 13674-1 (außer 49E4) und EN 13674-4+A1.
Diese Norm gilt nicht für starre Befestigungssysteme.
Diese Norm gilt ausschließlich für die Typzulassung eines kompletten Schienenbefestigungssystems. Anforderungen an die Qualitätskontrolle sind in den Normen enthalten, die für die Einzelbauteile gelten.

Applications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 7: Systèmes de fixation spéciaux pour appareils de voie et contre-rails

La présente Norme européenne spécifie les exigences de performance pour les systèmes de fixation spéciaux des catégories A à E comme spécifié dans l’EN 13481-1:2012, 3.1, pour appareils de voie et contre-rails fixés, dans le cadre du système de fixation global (et non sur des supports indépendants), sur des supports en bois, en béton et en acier dans les voies ballastées et sur les voies sur dalle avec des charges à l’essieu maximales et des rayons de courbure minimaux selon le Tableau 1.
Ces exigences s'appliquent aux systèmes de fixation qui intègrent un composant élastique et qui agissent sur le patin et/ou l’âme du rail, et qui sont destinés à être utilisés avec des profils de contre-aiguille selon l’EN 13674-1 (à l’exclusion du profil de rail 49E4) et EN 13674-4+A1.
La présente Norme ne s’applique pas aux systèmes de fixation rigides.
La présente norme s'applique uniquement à l’homologation d'un système de fixation complet. Les exigences relatives au contrôle de la qualité sont stipulées dans les normes applicables aux composants individuels.

Železniške naprave - Zgornji ustroj - Zahteve za izdelavo pritrdilnih sistemov - 7. del: Posebni pritrdilni sistemi za kretnice, križišča in vodilne tirnice

Ta evropski standard določa zahteve za izdelavo posebnih pritrdilnih sistemov v kategorijah od A do E, kot je določeno v točki 3.1 standarda 13481-1:2012, za kretnice in križišča ter vodilne tirnice, ki so v okviru skupnega pritrdilnega sistema (niso neodvisno pritrjeni na nosilno ogrodje) pritrjeni na leseno, betonsko ali jekleno nosilno ogrodje, pri zgornjem ustroju s tamponskim slojem in pri tiru, ter imajo največjo osno obremenitev in najmanjši krivinski polmer v divergentnem zgornjem ustroju. Zahteve se uporabljajo za pritrdilne sisteme, ki zajemajo odporni element in delujejo na vznožje in/ali stojino tirnice ter so namenjeni uporabi z deli železnic v standardih EN 13674-1 (brez 49 E4) in EN 13674-4+A1. Ta standard se ne uporablja za toge pritrdilne sisteme. Ta standard se uporablja samo za odobritev tipa celotnega pritrdilnega sestava. Zahteve za kontrolo kakovosti so zajete v standardih, ki se uporabljajo za posamezne sestavne dele.

General Information

• Status: Withdrawn
• Publication Date: 22-May-2012
• Withdrawal Date: 12-Jul-2022
• ICS: 93.100 - Construction of railways
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 1/WG 17 - Fastening systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 13-Jul-2022
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Mandate: M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
• Mandate: M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Ref Project: SIST EN 13481-7:2012 - Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails

Relations

• Replaces: EN 13481-7:2003/A1:2006 - Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails
• Effective Date: 30-May-2012
• Replaces: EN 13481-7:2003 - Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossing and check rails
• Effective Date: 30-May-2012
• Replaced By: EN 13481-7:2022 - Railway applications - Track - Performance requirements for fastening systems - Part 7: Fastening systems for switches and crossings, check rails, insulated rail joints and rail expansion devices
• Effective Date: 20-Jul-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WLUQLFHBahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 7: Spezielle Befestigungssysteme für Weichen und Kreuzungen sowie FührungsschienenApplications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 7: Systèmes de fixation spéciaux pour appareils de voie et contre-railsRailway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails93.100Gradnja železnicConstruction of railwaysICS:Ta slovenski standard je istoveten z:EN 13481-7:2012SIST EN 13481-7:2012en,fr,de01-julij-2012SIST EN 13481-7:2012SLOVENSKI
STANDARDSIST EN 13481-7:2004/A1:2007SIST EN 13481-7:20041DGRPHãþD



SIST EN 13481-7:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13481-7
May 2012 ICS 93.100 Supersedes EN 13481-7:2003English Version
Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails
Applications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 7: Systèmes de fixation spéciaux pour appareils de voie et contre-rails
Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 7: Spezielle Befestigungssysteme für Weichen und Kreuzungen sowie Führungsschienen This European Standard was approved by CEN on 27 April 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13481-7:2012: ESIST EN 13481-7:2012



EN 13481-7:2012 (E) 2 Contents Page Foreword . 3Introduction . 51Scope. 62Normative references . 63Terms and definitions . 74Symbols . 75Requirements . 85.1General . 85.2Longitudinal rail restraint . 85.3Torsional resistance . 95.4Assembly and pad stiffness . 95.5Effect of repeated loading . 95.5.1General . 95.5.2Dynamic stiffness of assembly . 95.5.3Test loads .
...