iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12055:1998

(Main)

Liquid chilling packages and heat pumps with electrically driven compressors - Cooling mode - Definitions, testing and requirements

Liquid chilling packages and heat pumps with electrically driven compressors - Cooling mode - Definitions, testing and requirements

This European Standard specifies methods for testing and reporting of the rating and operational requirements and it specifies requirements for marking of liquid chilling packages, water/water and air/water heat pumps with electrically driven compressors when used for cooling or for cooling and heat recovery. When these units are used for heating, then Parts 1 to 4 of EN 255 apply.

Flüssigkeitskühlsätze und Wärmepumpen mit elektrisch angetriebenen Verdichtern - Kühlen - Definitionen, Prüfung und Anforderungen

Die vorliegende Norm legt Prüfverfahren sowie Verfahren zur Angabe der Anforderungen hinsichtlich der Nennleistung und des Betriebs fest und enthält Anforderungen an die Kennzeichnung von Flüssigkeitskühlsätzen, Wasser/Wasser-Wärmepumpen und Luft/Wasser-Wärmepumpen mit elektrisch angetriebenen Verdichtern, wenn sie zum Kühlen oder zum Kühlen mit Wärmerückgewinnung eingesetzt werden. Beim Einsatz dieser Geräte für Heizzwecke gelten die Teile 1 bis 4 von EN 255.

Groupes refroidisseurs de liquide et pompes à chaleur avec compresseur entraîné par moteur électrique - Mode réfrigération - Définitions, essais et exigences

La présente norme européenne spécifie les méthodes d'essai des performances, la manière d'exprimer ces performances, les exigences de fonctionnement et de marquage des groupes refroidisseurs de liquide et des pompes à chaleur eau/eau et air/eau avec compresseur entraîné par moteur électrique, lorsqu'ils sont utilisés pour la réfrigération ou la réfrigération et la récupération de chaleur. Lorsque ces appareils sont utilisés pour le chauffage, des parties 1 à 4 de l'EN 255 s'appliquent.

Liquid chilling packages and heat pumps with electrically driven compressors - Cooling mode - Definitions, testing and requirements

General Information

Status
Withdrawn
Publication Date
20-Jan-1998
Withdrawal Date
12-May-2004
ICS
01.040.27 - Energy and heat transfer engineering (Vocabularies)
27.080 - Heat pumps
27.200 - Refrigerating technology
Technical Committee
CEN/TC 113 - Heat pumps and air conditioning units
Drafting Committee
CEN/TC 113 - Heat pumps and air conditioning units
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-May-2004
Completion Date
13-May-2004
Directive
92/75/EEC - Council Directive 92/75/EEC of 22 September 1992 on the indication by labelling and standard product information of the consumption of energy and other resources by household appliances
Mandate
M/274 - Mandate to CEN/CENELEC for the elaboration and adoption of standards for the measurement method for the determination of the efficiency of individual air conditioners
Ref Project
SIST EN 12055:2001 - Liquid chilling packages and heat pumps with electrically driven compressors - Cooling mode - Definitions, testing and requirements

Relations

Replaced By
EN 14511-1:2004 - Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions
Effective Date
22-Dec-2008
Replaced By
EN 14511-2:2004 - Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions
Effective Date
22-Dec-2008
Replaced By
EN 14511-3:2004 - Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods
Effective Date
22-Dec-2008
Replaced By
EN 14511-4:2004 - Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements
Effective Date
22-Dec-2008

Buy Standard

EN 12055:2001EN 12055:2001
PreviousNext
Standard
EN 12055:2001
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Liquid chilling packages and heat pumps with electrically driven compressors - Cooling mode - Definitions, testing and requirementsFlüssigkeitskühlsätze und Wärmepumpen mit elektrisch angetriebenen Verdichtern - Kühlen - Definitionen, Prüfung und AnforderungenGroupes refroidisseurs de liquide et pompes a chaleur avec compresseur entraîné par moteur électrique - Mode réfrigération - Définitions, essais et exigencesLiquid chilling packages and heat pumps with electrically driven compressors - Cooling mode - Definitions, testing and requirements27.200Hladilna tehnologijaRefrigerating technology27.080Heat pumps01.040.27Pren
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 378-1:2016+A1:2020(Main + Amendment)
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
SIST EN 378-1:2017+A1:2021

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term “refrigerating system” used in this European Standard includes heat pumps.
This part of EN 378 specifies the classification and selection criteria applicable to refrigerating systems. These classification and selection criteria are used in parts 2, 3 and 4.
This standard applies:
a)   to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e.g. ISO 13043;
b)   to secondary cooling or heating systems;
c)   to the location of the refrigerating systems;
d)   to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity;
Systems using refrigerants other than those listed in Annex E of this European Standard are not covered by this standard.
Annex C specifies how to determine the amount of refrigerant permitted in a given space, which when exceeded, requires additional protective measures to reduce the risk.
Annex E specifies criteria for safety and environmental considerations of different refrigerants used in refrigeration and air conditioning.
This standard is not applicable to refrigerating systems and heat pumps which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.
This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This standard also applies in the case of the conversion of a system to another refrigerant type, in which case conformity to the relevant clauses of parts 1 to 4 of the standard shall be assessed.
Product family standards dealing with the safety of refrigerating systems takes precedence over horizontal and generic standards covering the same subject.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 378-1:2016/FprA1(Amendment)
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
SIST EN 378-1:2017/kFprA1:2020

This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term "refrigerating system" used in this European Standard includes heat pumps.
This part of EN 378 specifies the classification and selection criteria applicable to refrigerating systems. These classification and selection criteria are used in parts 2, 3 and 4.
This standard applies:
a)   to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e.g. ISO 13043;
b)   to secondary cooling or heating systems;
c)   to the location of the refrigerating systems;
d)   to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity;
Systems using refrigerants other than those listed in Annex E of this European Standard are not covered by this standard.
Annex C specifies how to determine the amount of refrigerant permitted in a given space, which when exceeded, requires additional protective measures to reduce the risk.
Annex E specifies criteria for safety and environmental considerations of different refrigerants used in refrigeration and air conditioning.
This standard is not applicable to refrigerating systems and heat pumps which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.
This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This standard also applies in the case of the conversion of a system to another refrigerant type, in which case conformity to the relevant clauses of parts 1 to 4 of the standard shall be assessed.
Product family standards dealing with the safety of refrigerating systems takes precedence over horizontal and generic standards covering the same subject.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11267:2023(Main)
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023)
SIST EN ISO 11267:2023

This document specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Folsomia candida Willem by dermal and alimentary uptake. This document also provides information on how to use this method for testing substances under temperate conditions.
The chronic test described is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites of concern and waste materials.
The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 300 Pa at 25 °C.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/oprA2:2023
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18743:2015/A1:2023(Amendment)
Microbiology of the food chain - Detection of Trichinella larvae in meat by artificial digestion method - Amendment 1: Method validation studies and performance characteristics (ISO 18743:2015/Amd 1:2023)
SIST EN ISO 18743:2015/A1:2023
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4880:2023(Main)
Aerospace series - General technical specification for standard parts
kSIST FprEN 4880:2022
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16062:2023(Main)
Intelligent transport systems - ESafety - eCall high level application requirements (HLAP) using GSM/UMTS circuit switched networks
kSIST FprEN 16062:2022

In respect of pan-European eCall (operating requirements defined in EN 16072), this document defines the high-level application protocols, procedures and processes required to provide the eCall service using a TS12 emergency call over a circuit-switched mobile communications network.
NOTE 1   The objective of implementing the pan-European in-vehicle emergency call system (eCall) is to automate the notification of a traffic accident, wherever in Europe, with the same technical standards and the same quality of services objectives by using a PLMN (such as ETSI prime medium) which supports the European harmonized 112/E112 emergency number (TS12 ETSI TS 122 003) and to provide a means of manually triggering the notification of an emergency incident.
NOTE 2   HLAP requirements for third-party services supporting eCall can be found in EN 16102, and have been developed in conjunction with the development of this work item, and is consistent in respect of the interface to the PSAP. This deliverable makes reference to those provisions but does not duplicate them.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day