EN 13617-2:2004

Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers

This document specifies safety requirements for the construction and performance of safe breaks to be fitted to metering pumps and dispensers installed at filling stations and used to dispense liquid fuels into the tanks of motor vehicles, boats and light aircraft and into portable containers at flow rates up to 200 l×min-1.
It pays particular attention to electrical, mechanical and hydraulic characteristics of, and electrical apparatus incorporated within or mounted on, the safe break.
This document applies mainly to hazards related to the ignition of liquid fuels being dispensed or their vapour. This document also addresses electrical and mechanical hazards.
NOTE   Liquefied petroleum gas (LPG) is not a liquid in the sense of this document.

Tankstellen - Teil 2: Sicherheitstechnische Anforderungen an Bau- und Arbeitsweise von Abreißkupplungen für Zapfsäulen und druckversorgte Zapfsäulen

Dieses Dokument legt die sicherheitstechnischen Anforderungen an den Bau und die Arbeitsweise von Abreißkupplungen an Zapfsäulen und druckversorgten Zapfsäulen fest, die an Tankstellen für die Abgabe von flüssigen Kraftstoffen in Tanks von Automobilen, Booten und Leichtflugzeugen und in tragbare Behälter bei Durchflussraten bis zu 200 l × min-1 installiert werden.
Sie berücksichtigt besonders die elektrischen, mechanischen und hydraulischen Eigenschaften von Abreißkupp-lungen und der zugehörigen oder an ihnen angebrachten elektrischen Betriebsmittel.
Dieses Dokument ist hauptsächlich auf die Gefahren durch Entzünden von abzufüllenden flüssigen Kraftstoffen oder deren Dämpfe anwendbar. Dieses Dokument berücksichtigt auch die elektrischen und mechanischen Gefahren dieser Einrichtung.
ANMERKUNG   Flüssiggas (LPG) ist keine Flüssigkeit im Sinne dieses Dokuments.

Stations-service - Partie 2: Exigences de sécurité relatives à la construction et aux performances des raccords cassants utilisés pour les distributeurs de carburant

Le présent document spécifie les exigences relatives à la construction et aux performances en matière de sécurité des raccords cassants montés sur les distributeurs installés en stations-service et utilisés pour distribuer des carburants liquides dans des réservoirs de véhicules à moteur, de bateaux, d'avions légers et dans des réservoirs portables, dont les débits sont inférieurs à 200 l×min-1.
Elle accorde une attention toute particulière aux caractéristiques électriques, mécaniques et hydrauliques ainsi qu'aux appareillages électriques installés dans ou montés sur les raccords cassants.
Le présent document concerne principalement les phénomènes dangereux liés à l'inflammation des carburants liquides distribués ou de leurs vapeurs. Il concerne également les risques de nature électrique ou mécanique.
NOTE   Le gaz de pétrole liquéfié (GPL) n'est pas un carburant liquide au sens du présent document.

Bencinske črpalke - 2. del: Varnostne zahteve za izdelavo in lastnosti varnostnih zapor na ročnih in avtomatskih bencinskih črpalkah

General Information

• Status: Withdrawn
• Publication Date: 21-Sep-2004
• Withdrawal Date: 13-Mar-2012
• ICS: 75.200 - Petroleum products and natural gas handling equipment
• Technical Committee: CEN/TC 393 - Equipment for storage tanks and for service stations
• Drafting Committee: CEN/TC 393/WG 4 - Automatic nozzles and fuel dispensers at filling stations
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Mar-2012
• Completion Date: 14-Mar-2012
• Directive: 94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/BC/CEN/92/46 - Standardization mandate assigned to CEN/CENELEC concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Ref Project: SIST EN 13617-2:2004 - Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers

Relations

• Replaced By: EN 13617-2:2012 - Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensersStations-service - Partie 2: Exigences de sécurité relatives a la construction et aux performances des raccords cassants utilisés pour les distributeurs de carburantTankstellen - Teil 2: Sicherheitstechnische Anforderungen an Bau- und Arbeitsweise von Abreißkupplungen für Zapfsäulen und druckversorgte Zapfsäulen75.200Petroleum products and natural gas handling equipmentICS:SIST EN 13617-2:2004enTa slovenski standard je istoveten z:EN 13617-2:200401-november-2004SIST EN 13617-2:2004SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13617-2September 2004ICS 75.200English versionPetrol filling stations - Part 2: Safety requirements forconstruction and performance of safe breaks for use onmetering pumps and dispensersStations-service - Partie 2: Exigences de sécurité relativesà la construction et aux performances des raccordscassants utilisés pour les distributeurs de carburantTankstellen - Teil 2: Sicherheitstechnische Anforderungenan Bau- und Arbeitsweise von Abreißkupplungen fürZapfsäulen und druckversorgte ZapfsäulenThis European Standard was approved by CEN on 24 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13617-2:2004: E



EN 13617-2:2004 (E) 2 Contents
page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Explosion protection measures.5 5 Construction.6 5.1 General.6 5.2 Hose breaks.6 5.3 Inlet threads.6 6 Physical properties.7 7 Operational requirements.8 8 Tests.9 9 Information for use.10 9.1 General.10 9.2 Marking and instruction.
...