Spectator facilities - Part 7: Entry and exit elements and routes

This European Standard specifies safety and design characteristics of entry and exit elements of passage that are used in spectator facilities, either singularly or in combination, to provide a route.

Zuschaueranlagen - Teil 7: Eingangs- und Ausgangsanlagen und Wege

Diese Europäische Norm legt Sicherheits- und Planungsmerkmale der Eingangs- und Ausgangsanlagen von Durchgängen fest, die bei Zuschaueranlagen entweder getrennt voneinander oder in Kombination miteinander bei der Bereitstellung eines Weges Anwendung finden.

Installations pour spectateurs - Partie 7 : Éléments et itinéraires d'entrée et de sortie

La présente Norme européenne spécifie les caractéristiques de sécurité et de conception des éléments de passage d’entrée et de sortie utilisés dans les installations pour spectateurs, soit individuellement soit en combinaison, afin de fournir un itinéraire.

Prostori za gledalce - 7. del: Vhodni in izhodni elementi ter poti

Standard EN 13200-7 določa varnostne in zasnovne lastnosti vhodnih in izhodnih elementov, uporabljenih v prostorih za gledalce, samostojno ali v sestavih, za zagotavljanje poti.

General Information

Status
Published
Publication Date
18-Mar-2014
Withdrawal Date
29-Sep-2014
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Sep-2019
Completion Date
02-Sep-2019

Overview

EN 13200-7:2014 is a CEN European Standard that sets out safety and design characteristics for entry and exit elements and routes in spectator facilities (stadiums, arenas, theatres, sports halls and similar public buildings). Approved in 2013 and published in 2014, the standard defines terminology and criteria for planning spectator ingress, circulation and egress under normal and emergency conditions, with attention to accessibility for people with special needs.

Key topics

The standard covers practical technical topics including:

  • Terms & definitions: entry/exit capacity, entry elements, access control element, concourse, vomitories, etc.
  • Entry design: factors affecting entry capacity, principles for spectator ingress, counting and access control (turnstiles, gates, scanning devices).
  • Circulation and routes: zoning of circulation routes, concourses, passageways, ramps, stairways, headroom, widths, signage and lighting.
  • Vertical transport: escalators and lifts (with reference to accessibility requirements).
  • Exit and emergency egress: exit capacity, rates of passage, egress time, design of emergency evacuation routes and emergency escape lighting.
  • People with special needs: horizontal and vertical escape provisions and inclusive design considerations.
  • Product guidance (Annex A): product characteristics for access control elements such as full-height turnstiles and technical specs for scanning equipment/control systems.

Practical applications

EN 13200-7:2014 is used to design and manage safe, efficient spectator movement and to support compliance with European best practice. Typical uses:

  • Architects and stadium designers: dimensioning entrances, concourses, ramps and stairs to avoid bottlenecks.
  • Safety and evacuation planners: calculating exit capacity, estimating egress times and designing emergency evacuation routes.
  • Facility managers and event organizers: planning ticketing, access control, queuing systems and crowd-flow operations.
  • Manufacturers and suppliers: specifying turnstiles, gates, scanning equipment and electronic access-control systems in line with Annex A.
  • Accessibility consultants: ensuring inclusive access, evacuation strategies and compliance with related lift/escalator standards.

Benefits include improved spectator safety, predictable ingress/egress performance, reduced queuing, and better emergency preparedness.

Related standards

EN 13200-7 is part of the EN 13200 spectator facilities series (e.g., EN 13200-1). Normative references and related documents include:

  • EN 13200-1:2012 (general characteristics)
  • EN 115 (escalators & moving walks)
  • EN 81-70 (lift accessibility)
  • EN 12193 (sports lighting)
  • ISO 7001 (public information symbols)

Keywords: EN 13200-7, spectator facilities, entry and exit elements, entry capacity, exit capacity, access control, turnstiles, concourse, emergency evacuation, accessibility.

Standard
EN 13200-7:2014
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prostori za gledalce - 7. del: Vhodni in izhodni elementi ter potiZuschaueranlagen - Teil 7: Ein- und Ausgangsanlagen und WegeInstallations pour spectateurs - Éléments et itinéraires d'entrée et de sortieSpectator facilities - Part 7: Entry and exit elements and routes97.220.10Športni objektiSports facilities97.200.10Gledališka, odrska in studijska oprema ter delovne postajeTheatre, stage and studio equipment91.040.10Javne stavbePublic buildingsICS:Ta slovenski standard je istoveten z:EN 13200-7:2014SIST EN 13200-7:2014en,fr,de01-maj-2014SIST EN 13200-7:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13200-7
March 2014 ICS 91.040.10; 97.200.10; 97.220.10 English Version
Spectator facilities - Part 7: Entry and exit elements and routes Installations pour spectateurs - Partie 7 : Éléments et itinéraires d'entrée et de sortie
Zuschaueranlagen - Teil 7: Eingangs- und Ausgangsanlagen und Wege This European Standard was approved by CEN on 30 November 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13200-7:2014 ESIST EN 13200-7:2014

Access control elements - Product characteristics . 31 A.1 Full Height Turnstiles . 31 A.1.1 General . 31 A.1.2 Dimensional requirements . 31 A.1.3 Characteristics . 31 A.1.4 Ergonomics . 31 A.1.5 Electric circuits . 32 A.1.6 Control system . 32 A.1.7 Functions. 32 A.1.8 Time-out. 32 A.2 Technical specifications for the supply of scanning equipment to control access via turnstile entrances . 33 A.2.1 Control software . 33 A.2.2 Server . 33 A.2.3 Scanning device for Turnstile/Cage . 34 Bibliography . 35
Direct access to toilet facilities may also be provided. 3.12 passageway access route to a sector or block Note 1 to entry: A passageway, on level ground, slope or stair, includes vomitory and gangway. 3.13 stairway succession of steps including any landing at the head and foot of the steps or between flights that enables pedestrian passage between levels 3.14 rate of passage number of persons per meter width per minute that can pass through the specified element of an entry or exit route 3.15 flow capacity number of spectators that can safely pass through a given width of a space in a specified time 3.16 ramp slope designed to enable the passage of a pedestrian or wheel chair user from one level to another 3.17 place of safety place where a person is no longer in danger from fire or other emergencies 3.18 final exit termination of an escape route from a building or facility giving direct access to a place of safety SIST EN 13200-7:2014

Key 1 external area 2 services area 3 viewing area 4 activity area En1 entry point En2 horizontal outside routes En3 vertical outside routes En4 horizontal inside routes En5 vertical inside routes En6 vomitories Figure 1 — Entry system SIST EN 13200-7:2014

Key 1 external area 2 services area 3 viewing area 4 activity area Ex1 vomitories Ex2 horizontal inside routes Ex3 vertical inside routes Ex4 vertical outside routes Ex5 horizontal outside routes Ex6 exit point Figure 2 — Exit system SIST EN 13200-7:2014
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

Frequently Asked Questions

EN 13200-7:2014 is a standard published by the European Committee for Standardization (CEN). Its full title is "Spectator facilities - Part 7: Entry and exit elements and routes". This standard covers: This European Standard specifies safety and design characteristics of entry and exit elements of passage that are used in spectator facilities, either singularly or in combination, to provide a route.

This European Standard specifies safety and design characteristics of entry and exit elements of passage that are used in spectator facilities, either singularly or in combination, to provide a route.

EN 13200-7:2014 is classified under the following ICS (International Classification for Standards) categories: 91.040.10 - Public buildings; 97.200.10 - Theatre, stage and studio equipment; 97.220.10 - Sports facilities. The ICS classification helps identify the subject area and facilitates finding related standards.

You can purchase EN 13200-7:2014 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.