iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 18243:2019/A1:2020

(Amendment)

Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems - Amendment 1 (ISO 18243:2017/Amd 1:2020)

Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems - Amendment 1 (ISO 18243:2017/Amd 1:2020)

20200617 - TC decision to skip FV is missing.

Elektrisch angetriebene Kleinkrafträder und Motorräder - Prüfspezifikationen und Sicherheitsanforderungen für Lithium-Ionen-Batteriesysteme - Änderung 1 (ISO 18243:2017/Amd 1:2020)

Cyclomoteurs et motocycles à propulsion électrique - Spécifications d'essai et exigences de sécurité pour les systèmes de batterie au lithium-ion - Amendement 1 (ISO 18243:2017/Amd 1:2020)

Mopedi in motorna kolesa na električni pogon - Metode preskušanja in varnostne zahteve za sisteme z litij-ionskimi baterijami - Dopolnilo A1 (ISO 18243:2017/Amd 1:2020)

General Information

Status
Published
Publication Date
22-Sep-2020
Withdrawal Date
30-Mar-2021
ICS
43.140 - Motorcycles and mopeds
Technical Committee
CEN/TC 301 - Electrically propelled road vehicles
Drafting Committee
CEN/TC 301 - Electrically propelled road vehicles
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
23-Sep-2020
Completion Date
23-Sep-2020
Directive
2014/94/EU - Directive 2014/94/EU of The European Parliament and of The Council of 22 October 2014 on the deployment of alternative fuels infrastructure
Mandate
M/533 - [C(2015)1330] Standardisation request addressed to CEN, CENELEC and ETSI in support of the implementation of the Directive 2014/94/EU on the deployment of alternative fuels infrastructure
Ref Project
SIST EN ISO 18243:2019/A1:2020 - Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems - Amendment 1 (ISO 18243:2017/Amd 1:2020)

Relations

Amends
EN ISO 18243:2019 - Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems (ISO 18243:2017)
Effective Date
31-Jul-2019

Buy Standard

EN ISO 18243:2019/A1:2020EN ISO 18243:2019/A1:2020
PreviousNext
Amendment
EN ISO 18243:2019/A1:2020
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18243:2019/A1:2020
01-december-2020
Mopedi in motorna kolesa na električni pogon - Metode preskušanja in varnostne
zahteve za sisteme z litij-ionskimi baterijami - Dopolnilo A1 (ISO 18243:2017/Amd
1:2020)
Electrically propelled mopeds and motorcycles - Test specifications and safety
requirements for lithium-ion battery systems - Amendment 1 (ISO 18243:2017/Amd
1:2020)
Elektrisch angetriebene Kleinkrafträder und Motorräder - Prüfspezifikationen und
Sicherheitsanforderungen für Lithium-Ionen-Batteriesysteme - Änderung 1 (ISO
18243:2017/Amd 1:2020)
Cyclomoteurs et motocycles à propulsion électrique - Spécifications d'essai et exigences
de sécurité pour les systèmes de batterie au lithium-ion - Amendement 1 (ISO
18243:2017/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 18243:2019/A1:2020
ICS:
43.140 Motorna kolesa in mopedi Motorcycles and mopeds
SIST EN ISO 18243:2019/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 18243:2019/A1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 18243:2019/A1:2020


EN ISO 18243:2019/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2020
EUROPÄISCHE NORM
ICS 43.140
English Version

Electrically propelled mopeds and motorcycles - Test
specifications and safety requirements for lithium-ion
battery systems - Amendment 1 (ISO 18243:2017/Amd
1:2020)
Cyclomoteurs et motocycles à propulsion électrique - Elektrisch angetriebene Kleinkrafträder und
Spécifications d'essai et exigences de sécurité pour les Motorräder - Prüfspezifikationen und
systèmes de batterie au lithium-ion - Amendement 1 Sicherheitsanforderungen für Lithium-Ionen-
(ISO 18243:2017/Amd 1:2020) Batteriesysteme - Änderung 1 (ISO 18243:2017/Amd
1:2020)
This amendment A1 modifies the European Standard EN ISO 18243:2019; it was approved by CEN on 21 September 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18243:2019/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 18243:2019/A1:2020
EN ISO 18243:2019/A1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 18243:2019/A1:2020
EN ISO 18243:2019/A1:2020 (E)
European foreword
This document (EN ISO 18243:2019/A1:2020) has been prepared by Technical Committee ISO/TC 22
"Road vehicles" in collaboration with Technical Committee CEN/TC 301 “Road vehicles” the secretariat
of which is held by AFNOR.
This Amendment to the European Standard EN ISO 18243:2019 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2021, and
conflicting national standards shall be withdrawn at the latest by March 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 18246:2023(Main)
Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2023)
SIST EN ISO 18246:2023

This document specifies safety requirements for conductive connection of electrically propelled mopeds and motorcycles (referred to as the EVs) to external electric circuits.
NOTE 1   External electric circuits include external electric power supplies and external electric loads.
It does not provide comprehensive safety information for manufacturing, maintenance and repair personnel.
It applies only to on-board charging systems between the plug or vehicle inlet and RESS circuits.
NOTE 2   The requirements when not connected to external electric circuits are specified in the ISO 13063 series.
Requirements for bidirectional energy transfer DC to AC are under consideration and are not part of this document.
NOTE 3   The safety requirements for DC EV supply equipment where protection relies on electrical separation are specified in IEC 61851-25.
NOTE 4   The safety requirements for DC EV supply equipment where protection relies on double or reinforced insulation are specified in IEC TS 61851-3-1 and IEC TS 61851-3-2.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18243:2019(Main)
Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems (ISO 18243:2017)
SIST EN ISO 18243:2019

ISO 18243:2017 specifies the test procedures for lithium-ion battery packs and systems used in electrically propelled mopeds and motorcycles.
The specified test procedures enable the user of this document to determine the essential characteristics on performance, safety and reliability of lithium-ion battery packs and systems. The user is also supported to compare the test results achieved for different battery packs or systems.
ISO 18243:2017 enables setting up a dedicated test plan for an individual battery pack or system subject to an agreement between customer and supplier. If required, the relevant test procedures and/or test conditions of lithium-ion battery packs and systems are selected from the standard tests provided in this document to configure a dedicated test plan.
NOTE 1       Electrically power-assisted cycles (EPAC) cannot be considered as mopeds. The definition of electrically power-assisted cycles can differ from country to country. An example of definition can be found in the EU Directive 2002/24/EC.
NOTE 2       Testing on cell level is specified in IEC 62660 (all parts).

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18246:2023(Main)
Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2023)
SIST EN ISO 18246:2023

This document specifies safety requirements for conductive connection of electrically propelled mopeds and motorcycles (referred to as the EVs) to external electric circuits.
NOTE 1   External electric circuits include external electric power supplies and external electric loads.
It does not provide comprehensive safety information for manufacturing, maintenance and repair personnel.
It applies only to on-board charging systems between the plug or vehicle inlet and RESS circuits.
NOTE 2   The requirements when not connected to external electric circuits are specified in the ISO 13063 series.
Requirements for bidirectional energy transfer DC to AC are under consideration and are not part of this document.
NOTE 3   The safety requirements for DC EV supply equipment where protection relies on electrical separation are specified in IEC 61851-25.
NOTE 4   The safety requirements for DC EV supply equipment where protection relies on double or reinforced insulation are specified in IEC TS 61851-3-1 and IEC TS 61851-3-2.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16990:2020(Main)
Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use - Side by Side Vehicles - Safety requirements and test methods
SIST EN 16990:2020

This European Standard applies to "Side by Side machines" or "SbSs" as defined in Clause 3, propelled by internal combustion engines using liquid fuels (petrol, diesel, bio-fuels, lpg) and/or electric drive, intended to be used primarily on unpaved surfaces and not intended to be used on public roads ).
This European Standard defines safety requirements relating to the elements of design, operation, and maintenance of Side by Side machines and deals with all significant hazards, hazardous situations and events relevant to Side by Side machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It deals with the significant hazards during the whole lifecycle of the product as defined in of EN ISO 12100:2010, 5.3
This European Standard is not dealing with:
-   Side by Side Machines exclusively intended for competition );
-   Side by Side Machines intended to be used by persons under the age of 14 years;
-   agricultural and forestry tractors coming under Regulation (EU)167/2013;
-   3 or 4 wheeled vehicles coming under Regulation (EU)168/2013;
-   accessories for additional functions );
-   the additional hazards due to the use of the Side by Side Machine on public roads;
-   the additional hazards due to the use of remote control.
This document is not intended to cover all terrain machines (ATVs) complying with EN 15997.
This European Standard is not applicable to Side by Side machines which are manufactured before the date of its publication as EN.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18243:2019(Main)
Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems (ISO 18243:2017)
SIST EN ISO 18243:2019

ISO 18243:2017 specifies the test procedures for lithium-ion battery packs and systems used in electrically propelled mopeds and motorcycles.
The specified test procedures enable the user of this document to determine the essential characteristics on performance, safety and reliability of lithium-ion battery packs and systems. The user is also supported to compare the test results achieved for different battery packs or systems.
ISO 18243:2017 enables setting up a dedicated test plan for an individual battery pack or system subject to an agreement between customer and supplier. If required, the relevant test procedures and/or test conditions of lithium-ion battery packs and systems are selected from the standard tests provided in this document to configure a dedicated test plan.
NOTE 1       Electrically power-assisted cycles (EPAC) cannot be considered as mopeds. The definition of electrically power-assisted cycles can differ from country to country. An example of definition can be found in the EU Directive 2002/24/EC.
NOTE 2       Testing on cell level is specified in IEC 62660 (all parts).

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1621-1:2012(Main)
Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods
SIST EN 1621-1:2013

This European Standard specifies requirements and test methods for limb joint impact protectors incorporated or intended to be incorporated into motorcycle riders' clothing or used as separate items.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15997:2011/AC:2012(Corrigendum)
All terrain vehicles (ATVs - Quads) - Safety requirements and test methods
SIST EN 15997:2012/AC:2013

This European Standard applies to All Terrain Vehicles or ATVs as defined in Clause 3 propelled by internal combustion engines using liquid fuels (petrol, diesel) not intended to be used on public roads1). This European Standard is not dealing with :
ATVs exclusively intended for competition2);
agricultural and forestry tractors coming under the Directive 2003/37/EC;
accessories for additional functions (towing hook and load carrying provisions remaining within the
vertical projection onto the ground of the vehicle are not considered as accessories);
the additional hazards due to the use of the ATV on public roads;
the additional hazards due to the use of remote control.
This European Standard deals with all significant hazards, hazardous situations and events relevant to ATVs,
when they are used as intended and under conditions of misuse which are reasonably foreseeable by the
manufacturer (see Clause 4). It deals with the significant hazards during the whole lifecycle of the product as
defined in 5.3 of EN ISO 12100-1:2003. This European Standard is not applicable to ATVs which are manufactured before the date of its publication
as EN.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16029:2012(Main)
Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods
SIST EN 16029:2012

This European Standard specifies the safety requirements and the test methods for single-track two-wheel motor vehicles, driven by a rider sitting astride. This European Standard deals with all significant hazards, hazardous situations and events relevant to single-track two-wheel motor vehicles propelled by a spark ignited internal combustion engine (hereinafter referred to as "vehicles"), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
The vehicles covered by this European Standard are not intended to be used on public roads.
The vehicles covered by this European Standard are intended only for the rider and not for passengers.
This European Standard does not cover vehicles propelled with gaseous fuels.
This European Standard specifies the appropriate measures to eliminate or reduce the risks arising from the significant hazards, hazardous situations and events (see Clause 4) during commissioning, operation and maintenance of the vehicles when carried out in accordance with the specifications as intended by the manufacturer.
This European Standard is not applicable to vehicles which are manufactured before the date of publication of this European Standard by CEN.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15997:2011(Main)
All terrain vehicles (ATVs - Quads) - Safety requirements and test methods
SIST EN 15997:2012

This European Standard applies to “All Terrain Vehicles” or “ATVs” as defined in Clause 3 using liquid fuels (e.g. petrol, diesel). This European Standard does not deal with requirements relating to use on public roads  ).
This European Standard is not dealing with:
   ATVs exclusively intended for competition  );
   agricultural and forestry tractors coming under the Directive 2003/37/EC;
   accessories for additional functions (towing hook and load carrying provisions remaining within the vertical projection onto the ground of the vehicle without these load carrying provisions are not considered as accessories);
   the additional hazards due to the use of the ATV on public roads;
   the additional hazards due to the use of remote control.
This European Standard deals with all significant hazards, hazardous situations and events relevant to ATVs, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It deals with the significant hazards during the whole lifecycle of the product as defined in 5.3 of EN ISO 12100-1:2003.
This European Standard is not applicable to ATVs which are manufactured before the date of its publication as EN.
NOTE   For the purpose of this document, any reference to the vehicle should be regarded as a reference as a machine.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day