EN ISO 21809-1:2011

Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)

ISO 21809-1:2011 specifies requirements of plant-applied external three-layer polyethylene- and polypropylene-based coatings for corrosion protection of welded and seamless steel pipes for pipeline transportation systems in the petroleum and natural gas industries in accordance with ISO 13623.
Pipes coated in accordance with ISO 21809-1:2011 are considered suitable for further protection by means of cathodic protection.

Erdöl- und Erdgasindustrie - Umhüllungen für erd- und wasserverlegte Rohrleitungen in Transportsystemen - Teil 1: Polyolefinumhüllungen (3-Lagen-PE und 3-Lagen-PP) (ISO 21809-1:2011)

Industries du pétrole et du gaz naturel - Revêtements externes des conduites enterrées ou immergées utilisées dans les systèmes de transport par conduites - Partie 1: Revêtements à base de polyoléfines (PE tricouche et PP tricouche) (ISO 21809-1:2011)

L'ISO 21809-1:2011 spécifie les prescriptions relatives aux revêtements externes à base de polyéthylène et polypropylène, trois couches, appliqués en usine pour la protection contre la corrosion des tubes en acier soudés et sans soudure utilisés dans des systèmes de transport par conduites, pour les industries du pétrole et du gaz naturel, conformes à l'ISO 13623.
Les tubes revêtus conformément à l'ISO 21809-1:2011 sont considérés comme convenant pour une protection ultérieure par protection cathodique.

Naftna industrija in industrija zemeljskega plina - Zunanje prevleke za cevovode, zakopane v zemljo ali potopljene v vodo, v sistemih cevovodnega transporta - 1. del: Poliolefinske prevleke (3-slojni PE in 3-slojni PP) (ISO 21809-1:2011)

Ta del ISO 21809 določa zahteve za tovarniško nanesene zunanje trislojne prevleke na osnovi polietilena in polipropilena za zaščito pred korozijo varjenih in nevarjenih jeklenih cevi za sisteme cevovodnega transporta v naftni industriji in industriji zemeljskega plina v skladu z ISO 13623.

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2011
• Withdrawal Date: 06-Nov-2018
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 23.040.99 - Other pipeline components
• ICS: 75.200 - Petroleum products and natural gas handling equipment
• ICS: 87.040 - Paints and varnishes
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 07-Nov-2018
• Ref Project: SIST EN ISO 21809-1:2012 - Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)

Relations

• Replaced By: EN ISO 21809-1:2018 - Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018)
• Effective Date: 14-Nov-2018

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Naftna industrija in industrija zemeljskega plina - Zunanje prevleke za cevovode, zakopane v zemljo ali potopljene v vodo, v sistemih cevovodnega transporta - 1. del: Poliolefinske prevleke (3-slojni PE in 3-slojni PP) (ISO 21809-1:2011)Erdöl und Erdgasindustrie - Umhüllungen für erd- und wasserverlegte Rohrleitungen in Transportsystemen - Teil 1: Polyolefinumhüllungen (3-Lagen-PE und 3-Lagen-PP) (ISO 21809-1:2011)Industries du pétrole et du gaz naturel - Revetements externes des conduites enterrées et immergées utilisées dans les systemes de transport par conduites - Partie 1: Revetements a base de polyoléfines (PE tri couche et PP tri couche) (ISO 21809-1:2011)Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)75.200Petroleum products and natural gas handling equipment25.220.99Druge obdelave in prevlekeOther treatments and coatingsICS:Ta slovenski standard je istoveten z:EN ISO 21809-1:2011SIST EN ISO 21809-1:2012en,fr01-januar-2012SIST EN ISO 21809-1:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 21809-1
July 2011 ICS 75.200 English Version
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
Industries du pétrole et du gaz naturel - Revêtements externes des conduites enterrées ou immergées utilisées dans les systèmes de transport par conduites - Partie 1: Revêtements à base de polyoléfines (PE tricouche et PP tricouche) (ISO 21809-1:2011)
Erdöl und Erdgasindustrie - Umhüllungen für erd- und wasserverlegte Rohrleitungen in Transportsystemen - Teil 1: Polyolefinumhüllungen (3-Lagen-PE und 3-Lagen-PP) (ISO 21809-1:2011) This European Standard was approved by CEN on 30 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 21809-1:2011: ESIST EN ISO 21809-1:2012

Reference numberISO 21809-1:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO21809-1First edition2011-07-01Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) Industries du pétrole et du gaz naturel — Revêtements externes des conduites enterrées ou immergées utilisées dans les systèmes de transport par conduites — Partie 1: Revêtements à base de polyoléfines (PE tricouche et PP tricouche)
ISO 21809-1:2011(E)
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 21809-1:2011(E) © ISO 2011 – All rights reserved iii Contents Page Foreword.v Introduction.vi 1 Scope.1 2 Conformance.1 2.1 Rounding.1 2.2 Compliance to standard.1 3 Normative references.1 4 Terms and definitions.3 5 Symbols and abbreviated terms.6 5.1 Symbols.6 5.2 Abbreviations.6 6 Information supplied by the purchaser.7 6.1 General information.7 6.2 Additional information.7 7 Coating classification.8 7.1 General.8 7.2 Coating classes.8 7.3 Coating thickness classes.8 8 Coating materials.9 8.1 Composition of the coating system.9 8.2 Qualification of the coating materials.9 8.3 Batch certificate.11 8.4 Storage and handling of coating materials.13 9 Coating system qualification.13 9.1 General.13 9.2 Application procedure specification.13 9.3 Procedure qualification trial.15 9.4 Inspection and testing plan.15 10 Application of the coating system.15 10.1 Surface preparation.15 10.2 Coating application.16 10.3 Cutback.16 11 Inspection and testing.17 11.1 General.17 11.2 Retesting.18 12 Coating repairs.19 13 Marking.19 13.1 General.19 13.2 Required markings.19 14 Handling and storage in the applicators facilities.19 14.1 Handling.19 14.2 Storage.20 15 Test reports and certificate of compliance.20 SIST EN ISO 21809-1:2012

ISO 21809-1:2011(E) iv © ISO 2011 – All rights reserved Annex A (normative)
Inspection of thickness.21 Annex B (normative)
Holiday detection test.22 Annex C (normative)
Peel strength test.23 Annex D (normative)
Thermal analysis of epoxy and cured epoxy coating film.28 Annex E (normative)
Impact test.33 Annex F (normative)
Indentation test.35 Annex G (normative)
UV ageing test and thermal ageing test.36 Annex H (normative)
Cathodic disbondment test.39 Annex I (normative)
Flexibility test.43 Annex J (normative)
Gel time of the epoxy powder.45 Annex K (normative)
Total volatile/moisture content of the epoxy powder — Mass loss.47 Annex L (normative)
Procedure qualification trial, inspection and testing plan and daily log.49 Annex M (normative)
Hot water immersion test.50 Annex N (normative)
Density of epoxy powder.52 Bibliography.
...