Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 44: Lifting appliances in wind turbines

1.1   This document specifies the safety requirements for the construction and installation of power operated lifting appliances installed permanently for indoor or outdoor service in wind turbines and intended for access to workplaces on wind turbines, including rescue and evacuation procedures. A lifting appliance serves defined landing levels and can move persons to working positions where they are carrying out work (which could be from the carrier) and has a carrier which is:
a)   designed for the transportation of persons and goods;
b)   guided;
c)   travelling vertically or along a path within 15° maximum from the vertical;
d)   supported or sustained by rack and pinion or rope traction drive;
e)   travelling with a speed not more than 0,7 m/s;
f)   able to operate in a temperature range between - 25 °C to + 55 °C.
1.2   This document does not cover hazards related to:
a)   noise;
b)   the use of the lifting appliance for erection or dismantling of the wind turbine;
c)   lightning protection;
d)   use in potentially explosive atmospheres;
e)   electromagnetic compatibility (emission, immunity);
f)   transporting of goods outside the carrier;
g)   the use of combustion engines;
h)   hydraulic and pneumatic drive units;
i)   the use of lifting appliances in floating wind turbines;
j)   use during earthquakes.
1.3   This document is not applicable to lifting appliances manufactured before the date of its publication.

Sicherheitsregeln für die Konstruktion und Installation von Aufzügen - Besondere Aufzüge für den Transport von Personen und Gütern - Teil 44: Aufzüge in Windenergieanlagen

Règles de sécurité pour la construction et l'installation des élévateurs - Élévateurs particuliers destinés au transport des personnes et des matériaux - Partie 44 : Élévateurs pour éolienne

1.1   Le présent document spécifie les exigences de sécurité pour la construction et l'installation d’élévateurs installés de manière permanente pour une utilisation à l'intérieur ou à l'extérieur dans les éoliennes et destinés à permettre l'accès aux postes de travail sur les éoliennes, y compris pour ce qui concerne les procédures de sauvetage et d'évacuation. Un élévateur dessert des paliers définis et peut déplacer des personnes jusqu'à des positions de travail où elles réalisent un travail (qui peut être effectué à partir de l'habitacle) et comprend un habitacle qui :
a)   est conçu pour le transport des personnes et des matériaux ;
b)   est guidé ;
c)   se déplace verticalement ou le long de guides, dont l'angle maximal avec la verticale ne dépasse pas 15° ;
d)   est supporté ou soutenu par pignon et crémaillère ou par un entraînement par traction par câble ;
e)   se déplace avec une vitesse ne dépassant pas 0,7 m/s ;
f)   est apte à fonctionner dans une plage de températures de – 25 °C à + 55 °C.
1.2   Le présent document ne couvre pas les phénomènes dangereux liés aux points suivants :
a)   le bruit ;
b)   l'utilisation de l'élévateur pour le montage ou le démontage de l'éolienne ;
c)   la protection contre la foudre ;
d)   l'utilisation en atmosphère explosible ;
e)   la compatibilité électromagnétique (émission, immunité) ;
f)   le transport de matériaux à l’extérieur de l’habitacle ;
g)   l'utilisation de moteurs à combustion ;
h)   les mécanismes d'entraînement hydrauliques et pneumatiques ;
i)   l'utilisation d'élévateurs dans les éoliennes flottantes ;
j)   l'utilisation pendant des tremblements de terre.
1.3   Le présent document n'est pas applicable aux :
aux élévateurs fabriqués avant la date de sa publication.

Varnostna pravila za konstruiranje in vgradnjo dvigal (liftov) - Posebna dvigala za prevoz oseb in blaga - 44. del: Dvigala v vetrnih turbinah

General Information

Status
Not Published
Publication Date
01-Sep-2024
Current Stage
5020 - Submission to Vote - Formal Approval
Start Date
04-Apr-2024
Completion Date
04-Apr-2024

Buy Standard

Draft
prEN 81-44:2021
English language
118 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 81-44:2021
01-marec-2021
Varnostna pravila za konstruiranje in vgradnjo dvigal (liftov) - Posebna dvigala za
prevoz oseb in blaga - 44. del: Dvigala v vetrnih turbinah
Safety rules for the construction and installation of lifts - Special lifts for the transport of
persons and goods - Part 44: Lifting appliances in wind turbines
Sicherheitsregeln für die Konstruktion und Installation von Aufzügen - Besondere
Aufzüge für den Transport von Personen und Gütern - Teil 44: Aufzüge in
Windenergieanlagen
Règles de sécurité pour la construction et l'installation des élévateurs - Applications
particulières pour les ascenseurs et les ascenseurs de charge - Partie 44 : Ascenseurs
de chantier pour éolienne
Ta slovenski standard je istoveten z: prEN 81-44
ICS:
27.180 Vetrne elektrarne Wind turbine energy systems
91.140.90 Dvigala. Tekoče stopnice Lifts. Escalators
oSIST prEN 81-44:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 81-44:2021

---------------------- Page: 2 ----------------------
oSIST prEN 81-44:2021


DRAFT
EUROPEAN STANDARD
prEN 81-44
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2021
ICS 27.180; 91.140.90
English Version

Safety rules for the construction and installation of lifts -
Special lifts for the transport of persons and goods - Part
44: Lifting appliances in wind turbines
Règles de sécurité pour la construction et l'installation Sicherheitsregeln für die Konstruktion und Installation
des élévateurs - Applications particulières pour les von Aufzügen - Besondere Aufzüge für den Transport
ascenseurs et les ascenseurs de charge - Partie 44 : von Personen und Gütern - Teil 44: Aufzüge in
Ascenseurs de chantier pour éolienne Windenergieanlagen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 10.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 81-44:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 81-44:2021
prEN 81-44:2021 (E)
Contents Page
European foreword . 7
Introduction . 8
1 Scope . 9
2 Normative references . 10
3 Terms and definitions . 12
3.1 Terms and definitions . 12
3.2 Symbols and abbreviations . 15
4 List of significant hazards .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.