EN ISO 8662-4:1995

Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994)

This part of ISO 8662 specifies a laboratory method for measuring the vibrations at the handles of hand-held power-driven grinders. It is a type-test procedure for establishing the magnitude of vibration in the handle of a power tool fitted with a specified test wheel.  The power tools covered by this part of ISO 8662 may be pneumatically driven, or driven by other means. Typical tools are illustrated in figure 1.  It is intended that the results be used to compare different models of the same type of power tool, i.e. power tools intended for use with the same grinding wheel (same diameter and same maximum peripheral speed). If an evaluation of vibration exposure is required, then measurements in a work situation will be required.

Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am Handgriff - Teil 4: Schleifmaschinen (ISO 8662-4:1994)

Dieser Teil von ISO 8660 legt ein Labor-Meßverfahren zur Messung von Schwingungen an den Handgriffen von solchen handgehaltenen motorbetriebenen Schleifmaschinen fest, die in EN 792-7 angegeben sind. Es handelt sich um ein Meßverfahren zur Ermittlung von Schwingungskennwerten am Handgriff einer motorbetriebenen Maschine, an der eine bestimmte Ersatzschleifscheibe befestigt ist. Die Maschinen, die dieser Teil von ISO 8662 behandelt, können pneumatisch oder auf andere Weise angetrieben sein. In Bild 1 sind typische Maschinen dargestellt.

Machines à moteur portatives - Mesurage des vibrations au niveau des poignées - Partie 4: Meuleuses (ISO 8662-4:1994)

Gnana ročna orodja - Meritve vibracij na ročajih - 4. del: Brusilniki (ISO 8662-4:1994)

General Information

• Status: Withdrawn
• Publication Date: 12-Apr-1995
• Withdrawal Date: 14-Dec-2009
• ICS: 13.160 - Vibration and shock with respect to human beings
• ICS: 25.140.01 - Hand-held tools in general
• Technical Committee: CEN/TC 231 - Mechanical vibration and shock
• Drafting Committee: CEN/TC 231/WG 2 - Hand-arm vibration
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2009
• Completion Date: 15-Dec-2009
• Directive: 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN ISO 8662-4:2000 - Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994)

Relations

• Replaced By: EN ISO 28927-1:2009 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009)
• Effective Date: 19-Dec-2009
• Replaced By: EN ISO 28927-4:2010 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8662-4:2000
01-april-2000
*QDQDURþQDRURGMD0HULWYHYLEUDFLMQDURþDMLKGHO%UXVLOQLNL,62

Hand-held portable power tools - Measurement of vibrations at the handle - Part 4:
Grinders (ISO 8662-4:1994)
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am
Handgriff - Teil 4: Schleifmaschinen (ISO 8662-4:1994)
Machines a moteur portatives - Mesurage des vibrations au niveau des poignées - Partie
4: Meuleuses (ISO 8662-4:1994)
Ta slovenski standard je istoveten z: EN ISO 8662-4:1995
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
SIST EN ISO 8662-4:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8662-4:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 8662-4:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 8662-4:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 8662-4:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 8662-4:2000

---------------------
...