iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 694:2001/AC:2003

(Corrigendum)

Fire-fighting hoses - Semi-rigid hoses for fixed systems

Fire-fighting hoses - Semi-rigid hoses for fixed systems

TC - Modification to first Corrigendum

Feuerlöschschläuche - Formstabile Schläuche für Wandhydranten

Tuyaux de lutte contre l'incendie - Tuyaux semi-rigides pour systèmes fixes

Gasilske cevi - Poltoge cevi za vgrajene sisteme

General Information

Status
Withdrawn
Publication Date
16-Dec-2003
Withdrawal Date
10-Apr-2007
ICS
13.220.10 - Fire-fighting
23.040.70 - Hoses and hose assemblies
Technical Committee
CEN/TC 192 - Fire service equipment
Drafting Committee
CEN/TC 192 - Fire service equipment
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
11-Apr-2007
Completion Date
11-Apr-2007
Ref Project
SIST EN 694:2002/AC:2004 - Fire-fighting hoses - Semi-rigid hoses for fixed systems

Relations

Corrects
EN 694:2001 - Fire-fighting hoses - Semi-rigid hoses for fixed systems
Effective Date
22-Dec-2008
Merged Into
EN 694:2001+A1:2007 - Fire-fighting hoses - Semi-rigid hoses for fixed systems
Effective Date
18-Jan-2023

Buy Standard

EN 694:2002/AC:2004EN 694:2002/AC:2004
PreviousNext
Corrigendum
EN 694:2002/AC:2004
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fire-fighting hoses - Semi-rigid hoses for fixed systemsGasilske cevi - Poltoge cevi za vgrajene sistemeTuyaux de lutte contre l'incendie - Tuyaux semi-rigides pour systemes fixesFeuerlöschschläuche - Formstabile Schläuche für WandhydrantenTa slovenski standard je istoveten z:EN 694:2001/AC:2003SIST EN 694:2002/AC:2004en23.040.70Gumene cevi in armatureHoses and hose assemblies13.220.10Gašenje požaraFire-fightingICS:SLOVENSKI
STANDARDSIST EN 694:2002/AC:200401-april-2004







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 694:2001/ACDecember 2003Décembre 2003Dezember 2003ICS 13.220.10English versionVersion FrançaiseDeutsche FassungFire-fighting hoses - Semi-rigid hoses for fixed systemsTuyaux de lutte contre l'incendie - Tuyaux semi-rigides poursystèmes fixesFeuerlöschschläuche - Formstabile Schläuche fürWandhydrantenThis corrigendum becomes effective on 17 December 2003 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 17 décembre 2003 pour incorporation dans les trois versionslinguistiques officielles de l'EN.Die Berichtigung tritt am 17.Dezember 2003 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réserv
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 694:2014(Main)
Fire-fighting hoses - Semi-rigid hoses for fixed systems
SIST EN 694:2014

This European Standard specifies the requirements and test methods for semi-rigid hoses for fire-fighting purposes for use with fixed systems. The hoses are intended for use at a maximum working pressure of 1,2 MPa for hoses of 19 mm and 25 mm inside diameter and 0,7 MPa for hoses of 33 mm inside diameter.
Hoses conforming to this European Standard are intended for applications where long intervals can occur between the occasions of use, for example on fixed fire hose reels in buildings and other construction works.
This European Standard applies exclusively to hoses for fire-fighting purposes intended for use at ambient conditions in non-aggressive or non-corrosive atmospheres within the temperature range −20 °C to +60 °C.
NOTE 1   Hoses for use at ambient temperatures below −20°C can be supplied if they have been tested at the specified lower temperature in accordance with 6.4 and identified by their marking in Clause 8 f).
NOTE 2   All pressures are expressed in megapascals. 1 MPa = 10 bar

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14540:2014(Main)
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems
SIST EN 14540:2014

This European Standard specifies the requirements and test methods for non-percolating layflat hoses for fixed systems. The hoses are intended for use at a maximum working pressure of 1,5 MPa over a range of inside diameters from 25 mm to 52 mm.
This European Standard applies exclusively to hoses for fire-fighting purposes intended for use at a minimum ambient temperature of −20 °C in normal conditions, and a minimum temperature of −30 °C in colder climatic conditions and a maximum ambient temperature of +60 °C. Hoses conforming to this standard should be used with fire hose couplings conforming to the relevant national standards for couplings.
NOTE 1   Hoses for use at ambient temperatures below −20 °C can be supplied if they have been tested at the specified lower temperature in accordance with 6.4 and identified by their marking in Clause 8 f).
Hoses in marine applications and/or aggressive environments to be used with wall hydrants as specified in EN 671 2 can conform to the requirements of this standard.
NOTE 2   All pressures are gauge pressures and are expressed in megapascals .

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1947:2014(Main)
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
SIST EN 1947:2014

This European Standard specifies the requirements and test methods for semi-rigid hoses for use on fire-fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high pressure hoses (category II). The hoses are further subdivided into types and classes (see Clause 4).
This European Standard applies to hoses for fire-fighting purposes intended for use at ambient conditions within the temperature range −20 °C to +60 °C.
NOTE 1   Hoses for use at ambient temperatures below −20 °C can be supplied if they have been tested at the specified lower temperature in accordance with 6.5 and identified by their marking in Clause 8 h).
Hoses conforming to this standard are intended for use with fire hose couplings conforming to the relevant national standards for couplings.’
Requirements are also given for hose assemblies (see Clause 9) where these are fitted by the hose manufacturer.
NOTE 2   All pressures are expressed in megapascals. 1 MPa = 10 bar.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15889:2011(Main)
Fire-fighting hoses - Test methods
SIST EN 15889:2012

This European standard specifies test methods for lay-flat fire-fighting hoses for fixed systems, semi-rigid fire-fighting hoses for both fixed systems and vehicles and fire-fighting suction hoses for vehicles.
These test methods are required for the standards for fire-fighting hose product standards developed by CEN/TC 192. Consequently, the applicable test methods are selected and the requirements and test values defined in the relevant fire-fighting hose product standards and normatively referenced in those standards.
This European Standard does not cover test methods for lay-flat fire-fighting hoses for vehicles for which no European standard exists.
NOTE   Annex R (informative) lists the existing published ISO and EN hose test methods standards that are specified within fire-fighting hose standards.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 694:2014(Main)
Fire-fighting hoses - Semi-rigid hoses for fixed systems
SIST EN 694:2014

This European Standard specifies the requirements and test methods for semi-rigid hoses for fire-fighting purposes for use with fixed systems. The hoses are intended for use at a maximum working pressure of 1,2 MPa for hoses of 19 mm and 25 mm inside diameter and 0,7 MPa for hoses of 33 mm inside diameter.
Hoses conforming to this European Standard are intended for applications where long intervals can occur between the occasions of use, for example on fixed fire hose reels in buildings and other construction works.
This European Standard applies exclusively to hoses for fire-fighting purposes intended for use at ambient conditions in non-aggressive or non-corrosive atmospheres within the temperature range −20 °C to +60 °C.
NOTE 1   Hoses for use at ambient temperatures below −20°C can be supplied if they have been tested at the specified lower temperature in accordance with 6.4 and identified by their marking in Clause 8 f).
NOTE 2   All pressures are expressed in megapascals. 1 MPa = 10 bar

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14540:2014(Main)
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems
SIST EN 14540:2014

This European Standard specifies the requirements and test methods for non-percolating layflat hoses for fixed systems. The hoses are intended for use at a maximum working pressure of 1,5 MPa over a range of inside diameters from 25 mm to 52 mm.
This European Standard applies exclusively to hoses for fire-fighting purposes intended for use at a minimum ambient temperature of −20 °C in normal conditions, and a minimum temperature of −30 °C in colder climatic conditions and a maximum ambient temperature of +60 °C. Hoses conforming to this standard should be used with fire hose couplings conforming to the relevant national standards for couplings.
NOTE 1   Hoses for use at ambient temperatures below −20 °C can be supplied if they have been tested at the specified lower temperature in accordance with 6.4 and identified by their marking in Clause 8 f).
Hoses in marine applications and/or aggressive environments to be used with wall hydrants as specified in EN 671 2 can conform to the requirements of this standard.
NOTE 2   All pressures are gauge pressures and are expressed in megapascals .

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1947:2014(Main)
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
SIST EN 1947:2014

This European Standard specifies the requirements and test methods for semi-rigid hoses for use on fire-fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high pressure hoses (category II). The hoses are further subdivided into types and classes (see Clause 4).
This European Standard applies to hoses for fire-fighting purposes intended for use at ambient conditions within the temperature range −20 °C to +60 °C.
NOTE 1   Hoses for use at ambient temperatures below −20 °C can be supplied if they have been tested at the specified lower temperature in accordance with 6.5 and identified by their marking in Clause 8 h).
Hoses conforming to this standard are intended for use with fire hose couplings conforming to the relevant national standards for couplings.’
Requirements are also given for hose assemblies (see Clause 9) where these are fitted by the hose manufacturer.
NOTE 2   All pressures are expressed in megapascals. 1 MPa = 10 bar.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15889:2011(Main)
Fire-fighting hoses - Test methods
SIST EN 15889:2012

This European standard specifies test methods for lay-flat fire-fighting hoses for fixed systems, semi-rigid fire-fighting hoses for both fixed systems and vehicles and fire-fighting suction hoses for vehicles.
These test methods are required for the standards for fire-fighting hose product standards developed by CEN/TC 192. Consequently, the applicable test methods are selected and the requirements and test values defined in the relevant fire-fighting hose product standards and normatively referenced in those standards.
This European Standard does not cover test methods for lay-flat fire-fighting hoses for vehicles for which no European standard exists.
NOTE   Annex R (informative) lists the existing published ISO and EN hose test methods standards that are specified within fire-fighting hose standards.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day