iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12732:2000

(Main)

Gas supply systems - Welding steel pipework - Functional requirements

Gas supply systems - Welding steel pipework - Functional requirements

This European Standard contains requirements for the production and testing of weld joints for the installation and modification of onshore steel pipelines and pipework used in gas supply systems, including in-service pipelines, for all pressure ranges for the carriage of processed, non-toxic and non-corrosive natural gas according to ISO 13686.

Gasversorgungssysteme - Schweißen von Rohrleitungen aus Stahl - Funktionale Anforderungen

Diese Europäische Norm enthält Anforderungen an die Herstellung und Prüfung von Schweißnähten bei der Errichtung und Instandsetzung von landverlegten Stahlrohrleitungen und Anlagen der öffentlichen Gasversorgung einschließlich in Betrieb befindlicher Leitungen für alle Druckbereiche, die für den Transport von aufbereitetem, nicht giftigem und nicht korrosivem Erdgas entsprechend ISO 13686 bestimmt sind.

Systèmes d'alimentation en gaz - Soudage des tuyauteries en acier - Prescriptions fonctionnelles

La présente norme européenne contient des prescriptions pour l'exécution et le contrôle des assemblages soudés pour l'installation et la modification des tuyauteries et canalisations en acier utilisées dans les systèmes d'alimentation en gaz terrestres, y compris les tuyauteries en service, pour toutes les plages de pression pour le transport de gaz naturel non toxique et non corrosif, conformément à l'ISO 13686.

Sistemi oskrbe s plinom – Varjenje jeklenih cevovodov - Funkcionalne zahteve

General Information

Status
Withdrawn
Publication Date
18-Apr-2000
Withdrawal Date
30-Apr-2013
ICS
25.160.40 - Welded joints and welds
Technical Committee
CEN/TC 234 - Gas infrastructure
Drafting Committee
CEN/TC 234/WG 3 - Gas Transportation
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-May-2013
Completion Date
01-May-2013
Directive
90/531/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/017 - Standardization mandate to CEN in the field of equipment and installation for the transmission and distribution of gas
Ref Project
SIST EN 12732:2000 - Gas supply systems - Welding steel pipework - Functional requirements

Relations

Replaced By
EN 12732:2013 - Gas infrastructure - Welding steel pipework - Functional requirements
Effective Date
22-Dec-2008
Parent
EN 1594:2000 - Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements
Effective Date
22-Dec-2008

Buy Standard

EN 12732:2000EN 12732:2000
PreviousNext
Standard
EN 12732:2000
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sistemi oskrbe s plinom – Varjenje jeklenih cevovodov - Funkcionalne zahteveGasversorgungssysteme - Schweißen von Rohrleitungen aus Stahl - Funktionale AnforderungenSystemes d'alimentation en gaz - Soudage des tuyauteries en acier - Prescriptions fonctionnellesGas supply systems - Welding steel pipework - Functional requirements91.140.40Sistemi za oskrbo s plinomGas supply systems25.160.40Varjeni spoji in variWelded jointsICS:Ta slovenski standard je istoveten z:EN 12732:2000SIST EN 12732:2000en01-julij-2000SIST EN 12732:2000SLOVENSKI
STANDARD



SIST EN 12732:2000



SIST EN 12732:2000



SIST EN 12732:2000



SIST EN 12732:2000



SIST EN 12732:2000



SIST EN 12732:2000



SIST EN 12732:2000



SIST EN 12732:2000



SIST EN 12732:2000



SIST EN 12732:2000
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12732:2021(Main)
Gas infrastructure - Welding steel pipework - Functional requirements
SIST EN 12732:2022

This document contains requirements for the production and testing of weld joints for the installation and modification, including in-service welding, of onshore steel pipelines and pipework used in gas infrastructure. This includes all pressure ranges and processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 and non-conventional gases such as (injected) biomethane and hydrogen, where:
-   the pipeline elements are made of unalloyed or low-alloyed carbon steel;
-   the pipeline is not located within commercial or industrial premises as integral part of the industrial process on those premises except for any pipelines and facilities delivering gas to such premises;
-   the pipework is not located within households or industrial installations according to EN 1775 or EN 15001;
-   the design temperature of the system is between −40 °C up to and including 120 °C.
For injected biomethane or hydrogen a detailed technical evaluation of the functional requirements is required, ensuring there are no other constituents or properties of the gases that can affect the integrity of the pipeline.
This document is not applicable to welds produced prior to the publication of this document.
This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware that there can exist more detailed national standards and/or codes of practice in the CEN member countries.
This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this document, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts).
NOTE   CEN/TR 13737 (all parts) contains:
-   clarification of relevant legislation/regulations applicable in a country;
-   if appropriate, more restrictive national requirements;
-   national contact point for the latest information.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12732:2013/FprA1(Amendment)
Gas infrastructure - Welding steel pipework - Functional requirements
SIST EN 12732:2013/kFprA1:2013

This document amends prEN 12732 Clause 4.5 "Testing companies and personnel".

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12814-7:2024(Main)
Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens
kSIST FprEN 12814-7:2023

This document specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test with waisted test specimens in order to determine the tensile energy welding factor.
A tensile test with waisted specimens can be used in conjunction with other tests (e.g. bend, tensile, tensile creep, macro, etc.) to assess the performance of welded assemblies, made from thermoplastics materials.
The test is applicable to co-axial or co-planar heated tool butt welded assemblies made from thermoplastics materials filled or unfilled, but not reinforced. It is not applicable to tubular assemblies with a nominal outside diameter less than 90 mm.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9692-2:2024(Main)
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:2024)
oSIST prEN ISO 9692-2:2023

This document applies to types of joint preparation for submerged arc welding with one wire electrode (process 121 according to ISO 4063) on steel.
This document covers only the welding positions PA and PB according to ISO 6947. If PC is used, special preparation is necessary.
This document applies to fully penetrated welds. For partly penetrated welds, types of joint preparation, shapes and dimensions can differ from the listed proposals if they are specified in the relevant application standard or agreed by the parties concerned.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16729-5:2023(Main)
Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 5: Non-destructive testing on welds in track
SIST EN 16729-5:2023

This document specifies the procedures of visual testing and ultrasonic testing of rail welds in track for rail profiles meeting the requirements of EN 13674-1.
This document specifies the principles for testing procedures for manufactured welds. This document defines the procedure for repair welds and joint welds. This document does not define the number of welds to be tested.
This document is not concerned with the approval of the welding procedure.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5817:2023(Main)
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023)
SIST EN ISO 5817:2023

This document specifies quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness ≥ 0,5 mm. It covers fully penetrated butt welds and all fillet welds. Its principles can also be applied to partial-penetration butt welds.
Quality levels for beam-welded joints in steel are presented in ISO 13919-1.
Three quality levels are given in order to permit application to a wide range of welded fabrication. They are designated by symbols B, C and D. Quality level B corresponds to the highest requirement on the finished weld.
Several types of loads are considered, e.g. static load, thermal load, corrosion load, pressure load. Additional guidance on fatigue loads is given in Annex B.
The quality levels refer to production and good workmanship.
This document is applicable to:
a)       non-alloy and alloy steels;
b)       nickel and nickel alloys;
c)        titanium and titanium alloys;
d)       manual, mechanized and automatic welding;
e)       all welding positions;
f)         all types of welds, e.g. butt welds, fillet welds and branch connections;
g)       the following welding processes and their sub-processes, as defined in ISO 4063:
—     11 metal arc welding without gas protection;
—     12 submerged arc welding;
—     13 gas-shielded metal arc welding;
—     14 gas-shielded arc welding with non-consumable tungsten electrode;
—     15 plasma arc welding;
—     31 oxyfuel gas welding (for steel only).
Metallurgical aspects, such as grain size and hardness, are not covered by this document.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5173:2023(Main)
Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023)
SIST EN ISO 5173:2023

This document specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to reveal imperfections on or near the surface of the test specimen which is under tension during bend testing and/or assess ductility. It also gives the dimensions of the test specimen.
In addition, this document specifies methods to be used instead of transverse bend tests with a former for welded joints when base materials, heat affected zones and/or weld metal have a significant difference in their physical and mechanical properties in relation to bending.
This document applies to metallic materials in all forms of product with welded joints made by any welding process.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4761:2022(Main)
Non-destructive testing of welds - Phased array ultrasonic testing (UT-PA) for thin-walled steel components - Acceptance levels (ISO 4761:2022)
SIST EN ISO 4761:2023

This document specifies acceptance levels for the phased array ultrasonic testing technique (UT-PA) of full-penetration welds in low-alloy and/or fine-grained steels in the wall thickness range from 3,2 mm to 8 mm which correspond to the quality levels of ISO 5817.
These acceptance levels are applicable to indications detected according to ISO 20601.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10447:2022(Main)
Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022)
SIST EN ISO 10447:2023

This document specifies the procedures and recommended tooling to be used for peel and chisel testing of resistance spot and embossed projection welds. This document applies to welds made in two or more sheets in the thickness range of 0,5 mm to 3,0 mm.
The aim of these tests is to determine:
—    weld size and failure mode when welds are destructively tested;
—    verification of welds by non-destructive chisel tests.
NOTE      The preferred method of peel testing seam welds (mechanized peel testing) is covered in ISO 14270.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7963:2022(Main)
Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
SIST EN ISO 7963:2023

This document specifies the requirements for the dimensions, material, manufacture and methods of use for calibration block No. 2 for setting and checking ultrasonic test equipment.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day