Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017)

ISO 9455-15:2017 specifies a qualitative method for determination of the corrosive properties of flux residues on a copper substrate when subjected to controlled environmental conditions. The test is applicable to type 1 fluxes, as defined in ISO 9454‑1.

Flussmittel zum Weichlöten - Prüfverfahren - Teil 15: Kupferkorrosionsprüfung (ISO 9455-15:2017)

Dieser Teil der ISO 9455 liegt eine qualitative Methode fest zur Bestimmung der korrosiven Eigenschaften von Flussmittelrückständen auf einem Kupfersubstrat unter kontrollierbaren Umgebungsbedingungen. Die Prüfung ist anwendbar auf alle Flussmittel der Klasse 1 nach ISO 9454-1.

Flux de brasage tendre - Méthodes d'essai - Partie 15: Essai de corrosion du cuivre (ISO 9455-15:2017)

ISO 9455-15:2017 spécifie une méthode quantitative pour la détermination des propriétés corrosives des résidus de flux sur un substrat de cuivre, lorsqu'il est soumis à des conditions environnementales contrôlées. L'essai est applicable aux flux de type 1, tels que définis dans l'ISO 9454‑1.

Talila za mehko spajkanje - Preskusne metode - 15. del: Korozijski preskus bakra (ISO 9455-15:2017)

Ta dokument določa kvalitativno metodo za določevanje korozivnih lastnosti ostankov talila na bakrenih podlagah pri nadzorovanih okoljskih pogojih. Preskus se uporablja za talila tipa 1 iz standarda ISO 9454-1.

General Information

Status
Published
Publication Date
12-Sep-2017
Withdrawal Date
30-Mar-2018
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
13-Sep-2017
Completion Date
13-Sep-2017

Relations

Buy Standard

Standard
EN ISO 9455-15:2018 - BARVE
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 9455-15:2016 - BARVE
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9455-15:2018
01-februar-2018
1DGRPHãþD
SIST EN ISO 9455-15:2001
Talila za mehko spajkanje - Preskusne metode - 15. del: Korozijski preskus bakra
(ISO 9455-15:2017)
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 15: Kupferkorrosionsprüfung (ISO 9455
-15:2017)
Flux de brasage tendre - Méthodes d'essai - Partie 15: Essai de corrosion du cuivre (ISO
9455-15:2017)
Ta slovenski standard je istoveten z: EN ISO 9455-15:2017
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 9455-15:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9455-15:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 9455-15:2018


EN ISO 9455-15
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2017
EUROPÄISCHE NORM
ICS 25.160.50 Supersedes EN ISO 9455-15:1999
English Version

Soft soldering fluxes - Test methods - Part 15: Copper
corrosion test (ISO 9455-15:2017)
Flux de brasage tendre - Méthodes d'essai - Partie 15: Flussmittel zum Weichlöten - Prüfverfahren - Teil 15:
Essai de corrosion du cuivre (ISO 9455-15:2017) Kupferkorrosionsprüfung (ISO 9455-15:2017)
This European Standard was approved by CEN on 8 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-15:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9455-15:2018
EN ISO 9455-15:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9455-15:2018
EN ISO 9455-15:2017 (E)
European foreword
This document (EN ISO 9455-15:2017) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall
be withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9455-15:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9455-15:2017 has been approved by CEN as EN ISO 9455-15:2017 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 9455-15:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 9455-15:2018
INTERNATIONAL ISO
STANDARD 9455-15
Second edition
2017-08
Soft soldering fluxes — Test
methods —
...

SLOVENSKI STANDARD
oSIST prEN ISO 9455-15:2016
01-oktober-2016
Talila za mehko spajkanje - Preskusne metode - 15. del: Korozijski preskus bakra
(ISO/DIS 9455-15:2016)
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO/DIS 9455-
15:2016)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 15: Kupferkorrosionsprüfung (ISO/DIS
9455-15:2016)
Flux de brasage tendre - Méthodes d'essai - Partie 15: Essai de corrosion du cuivre
(ISO/DIS 9455-15:2016)
Ta slovenski standard je istoveten z: prEN ISO 9455-15
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
77.060 Korozija kovin Corrosion of metals
oSIST prEN ISO 9455-15:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 9455-15:2016

---------------------- Page: 2 ----------------------
oSIST prEN ISO 9455-15:2016
DRAFT INTERNATIONAL STANDARD
ISO/DIS 9455-15
ISO/TC 44/SC 12 Secretariat: DIN
Voting begins on: Voting terminates on:
2016-07-22 2016-10-13
Soft soldering fluxes — Test methods —
Part 15:
Copper corrosion test
Flux de brasage tendre — Méthodes d’essai —
Partie 15: Essai de corrosion du cuivre
ICS: 25.160.50
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 9455-15:2016(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2016

---------------------- Page: 3 ----------------------
oSIST prEN ISO 9455-15:2016
ISO/DIS 9455-15:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 9455-15:2016
ISO/DIS 9455-15:2016(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Reagents and materials . 1
5 Apparatus . 2
6 Preparation of tests pieces . 2
7 Procedure.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.