EN 13353:2008+A1:2011

Solid wood panels (SWP) - Requirements

This European Standard specifies requirements for solid wood panels as defined in EN 12775 with a maximum thickness of 80 mm for use in dry, humid and exterior conditions as defined in service classes 1, 2 and 3 of EN 1995-1-1.
Additional information on supplementary properties for certain applications is also given.

Massivholzplatten (SWP) - Anforderungen

Diese Europäische Norm legt Anforderungen an Massivholzplatten, definiert nach EN 12775, mit einer Dicke
von höchstens 80 mm" zur Verwendung im Trocken-, Feucht- und Außenbereich, definiert nach den
Nutzungsklassen 1, 2 und 3 nach EN 1995-1-1, fest.
Es werden zusätzliche Informationen über weitere Eigenschaften für bestimmte Verwendungszwecke angegeben.

Bois panneautés (SWP) - Exigences

La présente Norme européenne prescrit les exigences des bois panneautés tels que définis dans l’EN 12775
!avec une épaisseur maximale de 80 mm" pour utilisation en milieux sec, humide et extérieur comme
définis dans les classes de service 1, 2 et 3 de l’EN 1995-1-1.
Des informations supplémentaires sur des caractéristiques complémentaires pour certaines applications sont
également données.

Masivne lesne plošče (SWP) - Zahteve

Ta evropski standard določa zahteve za masivne lesne plošče, kot jih opredeljuje EN 12775, z največjo debelino 80 mm za uporabo v suhih, vlažnih in zunanjih pogojih, kot so opredeljeni v razredih storitev 1, 2 in 3 EN 1995-1-1. Podane so tudi dodatne informacije o dopolnilnih lastnostih za nekatere vrste uporabe.

General Information

• Status: Withdrawn
• Publication Date: 03-May-2011
• Withdrawal Date: 19-Jul-2022
• ICS: 79.060.99 - Other wood-based panels
• Technical Committee: CEN/TC 112 - Woodbased panels
• Drafting Committee: CEN/TC 112/WG 9 - Solid wood panels
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Jul-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/113 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on wood based panels
• Ref Project: SIST EN 13353:2009+A1:2011 - Solid wood panels (SWP) - Requirements

Relations

• Merged From: EN 13353:2008/FprA1 - Solid wood panels (SWP) Requirements
• Effective Date: 19-Jan-2023
• Merged From: EN 13353:2008 - Solid wood panels (SWP) - Requirements
• Effective Date: 18-Jan-2023
• Replaced By: EN 13353:2022 - Solid wood panels (SWP) - Requirements
• Effective Date: 27-Jul-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Massivholzplatten (SWP) - AnforderungenBois panneautés (SWP) - ExigencesSolid wood panels (SWP) - Requirements79.060.99Other wood-based panelsICS:Ta slovenski standard je istoveten z:EN 13353:2008+A1:2011SIST EN 13353:2009+A1:2011en,fr,de01-september-2011SIST EN 13353:2009+A1:2011SLOVENSKI
STANDARDSIST EN 13353:20091DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13353:2008+A1
May 2011 ICS 79.060.99 Supersedes EN 13353:2008English Version
Solid wood panels (SWP) - Requirements
Bois panneautés (SWP) - Exigences
Massivholzplatten (SWP) - Anforderungen This European Standard was approved by CEN on 18 October 2008 and includes Amendment 1 approved by CEN on 9 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13353:2008+A1:2011: ESIST EN 13353:2009+A1:2011

Properties for structural and non-structural applications . 12Bibliography . 13
!". Compared to EN 13353:2003 the following changes have been made: a) classification introduced according to non-structural use, structural use and declared values; b) information on moisture content of chemically or thermally treated wood added in 4.2; c) relationship between shear strength and wood failure percentage in introduced in 4.3.3; d) provisions for adhesives other than thermosetting for structural applications added in 4.3.4; e) different requirements for single and multi layer solid wood panels for structural applications specified in 4.5.2; f) footnote regarding alternative test methods for the determination of the bonding quality added in Table 5. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...