Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials

This European Standard is applicable to manhole tops and gully tops made of composite materials C1, C2 and C3 by using suitably controlled automatic processes that produce a single structure and that do not contain multiple pieces bonded together, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in:
-   areas which can only be used by pedestrians and pedal cyclists (class A 15),
-   pedestrian areas and comparable areas, car parks or car parking decks (class B 125),
-   the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (class C 250),
and in addition to manhole tops for use in
-   carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (class D 400).
This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/gratings made from composite materials with frames according to EN 124-2, EN 124-3, EN 124-4 and EN 124-6.
This document is not applicable to:
-   manhole tops and gully tops manufactured by means of hand lay-up method,
-   gratings/covers as part of prefabricated drainage channels according to EN 1433,
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts), and
-   surface boxes.

Aufsätze und Abdeckungen für Verkehrsflächen - Teil 5: Aufsätze und Abdeckungen aus Verbundwerkstoffen

Diese Europäische Norm gilt für Abdeckungen und Aufsätze aus Verbundwerkstoffen vom Typ C1, C2 und C3, mit einer lichte Weite bis einschließlich 1 000 mm zum Abdecken von Abläufen, Einsteig- und Kontrollschächten in Flächen, die für Fußgänger- und/oder Fahrzeugverkehr bestimmt sind. Sie werden in geeigneten überwachten automatischen Prozessen als ein Teil gefertigt und bestehen nicht aus mehreren, miteinander verbundenen Einzelteilen.
Sie gilt für Abdeckungen und Aufsätze zum Einbau in
-   Flächen, die ausschließlich von Fußgängern und Radfahrern benutzt werden können (mindestens Klasse A 15),
-   Fußgängerzonen und vergleichbare Flächen, PKW Parkflächen oder PKW-Parkdecks (mindestens Klasse B 125),
-   Bereiche im Bordrinnenbereich von Straßen, der, gemessen ab Bordsteinkante, höchstens 0,5 m in die Fahrbahn und höchstens 0,2 m in die Fußgängerzone hineinreicht (mindestens Klasse C 250),
und zusätzlich gilt sie für Abdeckungen zum Einbau in
-   Fahrbahnen von Straßen (auch Fußgängerstraßen), Seitenstreifen von Straßen und Parkflächen, die für alle Arten von Straßenfahrzeugen zugelassen sind (mindestens Klasse D 400),
Diese Europäische Norm ist nur in Verbindung mit FprEN 124-1 anwendbar und enthält Anleitungen für Kombinationen von Deckeln/Rosten aus Verbundwerkstoffen mit Rahmen nach FprEN 124-2, FprEN 124-3, FprEN 124-4 und FprEN 124-6.
Dieses Dokument gilt nicht für
-   handgefertigte Abdeckungen und Aufsätze,
-   Roste/Deckel als Teil vorgefertigter Entwässerungsrinnen nach EN 1433,
-   Dach- und Bodenabläufe in Gebäuden, wie in EN 1253 (alle Teile) festgelegt,
-   Straßenkappen.

Dispositifs de couronnement et de fermeture pour les zones de circulation utilisées par les piétons et les véhicules - Partie 5: Dispositifs de couronnement et de fermeture en matériaux composites

La présente Norme européenne est applicable aux dispositifs de fermeture et de couronnement fabriqués en matériaux composites C1, C2 et C3 à l'aide de procédés automatiques convenablement contrôlés qui sont moulés comme une structure unique et qui ne contiennent pas plusieurs pièces collées ensemble, avec une cote de passage inférieure ou égale à 1 000 mm pour la fermeture des ouvertures des avaloirs, des regards de visite et des boîtes d'inspection ou de branchement installés dans des zones soumises à la circulation des piétons et/ou de véhicules.
Elle est applicable aux dispositifs de fermeture et de couronnement à utiliser dans
-   les zones susceptibles d’être utilisées exclusivement par des piétons et des cyclistes (classe A 15),
-   les zones piétonnes et zones comparables, aires de stationnement ou parkings à étages pour voitures (classe B 125),
-   la zone des caniveaux ou bordures longeant les voies de circulation et les trottoirs qui, mesurée à partir de la bordure, s'étend au maximum à 0,5 m côté voie de circulation, et au maximum à 0,2 m côté zone piétonne (classe C 250),
et en plus des dispositifs de fermeture à utiliser dans les
-   voies de circulation des routes (y compris les rues piétonnes), les accotements stabilisés et les aires de stationnement pour tous types de véhicules routiers (classe D 400).
La présente Norme européenne n'est pas applicable individuellement, mais uniquement en association avec le FprEN 124 1 et fournit également des lignes directrices pour les combinaisons de tampons/grilles fabriquées en matériaux composites avec des cadres conformément aux FprEN 124 2, FprEN 124 3, FprEN 124 4 et FprEN 124 6.
Le présent document ne s’applique pas
-   aux dispositifs de fermeture et de couronnement fabriqués par des méthodes de moulage à la main,
-   aux grilles/tampons faisant partie des caniveaux hydrauliques préfabriqués conformes à l'EN 1433,
-   aux avaloirs de sol et de toiture dans les bâtiments qui sont spécifiés dans l'EN 1253 (toutes les parties), ni
-   aux bouches à clé.

Pokrovi za odtoke in jaške na voznih površinah in površinah za pešce - 5. del: Pokrovi za odtoke in jaške iz kompozitnih materialov

Ta standard se uporablja za pokrove za odtoke in jaške s svetlo odprtino do vključno 1000 mm, ki so nameščeni na območjih s površino za pešce in/ali vozno površino. Ta standard se uporablja za pokrove za jaške in odtoke ter rešetke – razredov A15 do C250, iz kompozita tipa A, ter – razredov A15 in B125 iz kompozita tipa B. OPOMBA 1: Za uporabe pri stalnih temperaturah nad 120 °C so lahko potrebne dodatne zahteve. Pokrovi za jaške in odtoke v skladu s tem standardom so izdelani iz kompozitnih materialov z uporabo ustrezno nadzorovanih samodejnih procesov, ki so oblikovani kot enotna struktura ter ne zajemajo več medsebojno povezanih kosov. Izdelki, izdelani z metodami ročnega laminiranja, so zunaj področja uporabe tega standarda. 5. del se ne uporablja samostojno, ampak samo v kombinaciji s standardom EN 124-1. Ta standard se ne uporablja za polnila, nameščena na kraju, kot so beton, tlakovci itd. Ne uporablja se za rešetke v okviru predizdelane padavinske kanalizacije v skladu s standardom EN 1433 ali za talne odtoke in strešne žlebove v stavbah, ki so navedeni v standardu EN 1253-1, ter za površinske škatle.

General Information

Status
Published
Publication Date
09-Jun-2015
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
11-Jun-2021

Relations

Buy Standard

Standard
EN 124-5:2015
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pokrovi za odtoke in jaške na voznih površinah in površinah za pešce - 5. del: Pokrovi za odtoke in jaške iz kompozitnih materialovAufsätze und Abdeckungen für Verkehrsflächen - Teil 5: Aufsätze und Abdeckungen aus VerbundwerkstoffenDispositifs de couronnement et de fermeture pour les zones de circulation utilisées par les piétons et les véhicules - Partie 5: Dispositifs de couronnement et de fermeture en matériaux compositesGully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials93.080.30Cestna oprema in pomožne napraveRoad equipment and installationsICS:Ta slovenski standard je istoveten z:EN 124-5:2015SIST EN 124-5:2015en,fr,de01-september-2015SIST EN 124-5:2015SLOVENSKI
STANDARDSIST EN 124:19961DGRPHãþD



SIST EN 124-5:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 124-5
June 2015 ICS 93.080.30 Supersedes EN 124:1994English Version
Gully tops and manhole tops for vehicular and pedestrian areas -Part 5: Gully tops and manhole tops made of composite materials
Dispositifs de couronnement et de fermeture pour les zones de circulation utilisées par les piétons et les véhicules - Partie 5: Dispositifs de couronnement et de fermeture en matériaux composites
Aufsätze und Abdeckungen für Verkehrsflächen - Teil 5: Aufsätze und Abdeckungen aus Verbundwerkstoffen This European Standard was approved by CEN on 12 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 124-5:2015 ESIST EN 124-5:2015



EN 124-5:2015 (E) 2 Contents Page Foreword .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Materials .6 4.1 General .6 4.2 Types of composite materials .7 4.2.1 General .7 4.2.2 Composite material C1 .7 4.2.3 Composite material C2 .7 4.2.4 Composite material C3 .7 4.3 Requirements for composite materials .8 4.3.1 General .8 4.3.2 Hardness .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.