iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 124:1994

(Main)

Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control

Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control

This standard applies to gully tops and manhole tops with a clear opening up to and including 1000 mm. for installation within areas subjected to pedestrian and/or vehicular traffic. This standard does not apply to surface boxes nor to floor and roof gullies in buildings which are specified in EN XXX. The purpose of this standard is to establish definitions, classes, materials, design and testing requirements, marking and quality control of gully tops and manhole tops.

Aufsätze und Abdeckungen für Verkehrsflächen - Baugrundsätze, Prüfungen, Kennzeichnung, Güteüberwachung

Diese Norm gilt für Aufsätze und Abdeckungen mit einer lichten Weite bis 1000 mm zum Einbau in Flächen, die für Fussgänger und/oder Fahrzeugverkehr bestimmt sind. Diese Norm gilt nicht für Strassenkappen und die in EN ... behandelten Abläufe für Gebäude. Zweck dieser Norm ist die Festlegung von Definitionen, Klassen, Werkstoffen, Bau- und Prüfgrundsätzen, der Kennzeichnung und der Güteüberwachung für Aufsätze und Abdeckungen.

Dispositifs de couronnement et de fermeture pour les zones de circulation utilisées par les piétons et les véhicules - Principes de construction, essais types, marquage, contrôle de qualité

Cette norme s'applique aux dispositifs de couronnement et de fermeture ayant unecote de passage jusqu'à 1000 mm inclus, destinés à être installés dans des zones soumises à la circulation de piétons et/ou de véhicules. Cette norme ne s'applique pas aux bouches à clé, ni aux avaloirs de toiture et de sol dans les bâtiments qui sont prescrits dans la norme EN xxx. Cette norme a pour objet d'établir les définitions, les classes, les matériaux, les prescriptions relatives aux principes de construction et aux essais, le marquage et la maîtrise de la qualité des dispositifs de couronnement et de fermeture.

Pokrovi za odtoke in jaške na voznih površinah in površinah za pešce - Zahteve za projektiranje, preskušanje, označevanje in kontrola kakovosti

General Information

Status
Withdrawn
Publication Date
06-Jun-1994
Withdrawal Date
09-Jun-2015
ICS
93.080.30 - Road equipment and installations
Technical Committee
CEN/TC 165 - Waste water engineering
Drafting Committee
CEN/TC 165 - Waste water engineering
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
10-Jun-2015
Directive
01/998 - Precious Metal
2001/998 - Precious Metal
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/118 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on waste water engineering products
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 124:1996 - Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control

Relations

Replaced By
EN 124-1:2015 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
Effective Date
08-Jun-2022
Replaced By
EN 124-3:2015 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
Effective Date
08-Jun-2022
Replaced By
EN 124-6:2015 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
Effective Date
08-Jun-2022
Replaced By
EN 124-5:2015 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
Effective Date
08-Jun-2022
Replaced By
EN 124-4:2015 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
Effective Date
08-Jun-2022
Replaced By
EN 124-2:2015 - Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
Effective Date
08-Jun-2022

Buy Standard

EN 124:1996EN 124:1996
PreviousNext
Standard
EN 124:1996
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aufsätze und Abdeckungen für Verkehrsflächen - Baugrundsätze, Prüfungen, Kennzeichnung, GüteüberwachungDispositifs de couronnement et de fermeture pour les zones de circulation utilisées par les piétons et les véhicules - Principes de construction, essais types, marquage, contrôle de qualitéGully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control93.080.30Cestna oprema in pomožne napraveRoad equipment and installationsICS:Ta slovenski standard je istoveten z:EN 124:1994SIST EN 124:1996en01-marec-1996SIST EN 124:1996SLOVENSKI
STANDARD



SIST EN 124:1996


...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 124-3:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
SIST EN 124-3:2015

This European Standard is applicable to gully tops and manhole tops made of mild steel, stainless steel and aluminium alloys whether in combination with concrete or not, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation in areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in:
-   areas which can only be used by pedestrians and pedal cyclists (at least class A 15),
-   pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125),
-   the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250),
-   carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400),
-   areas imposing high wheel loads, e.g. docks, aircraft pavements (at least class E 600),
-   areas imposing particularly high wheel loads, e.g. aircraft pavements (class F 900).
This European Standard is not applicable in isolation but only in combination with EN 124 1 and gives guidance for combinations of covers/gratings made from steel or aluminium alloys with frames according to EN 124 2 and EN 124 4, EN 124 5 and EN 124 6.
Fabrication of manhole tops and gully tops in accordance with this standard is limited to cold forming, mechanical crimping or welding together component parts made from metal plate, strip or bar or rolled or extruded metal sections.
This European Standard is not applicable to:
-   manhole tops and gully tops made of aluminium tread plates for use in carriageways of roads (class D 400) and areas imposing high wheel loads (Classes E 600 and F 900),
-   concave gratings for classes D 400 installed in carriageways of roads and hard shoulders and concave gratings for classes F 900 and E 600.
-   gratings/covers as part of prefabricated drainage channels according to EN 1433,
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts), and
-   surface boxes.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 124-4:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
SIST EN 124-4:2015

This European Standard is applicable to precast gully tops and manhole tops made of steel reinforced concrete with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in
-   areas which can only be used by pedestrians and pedal cyclists (at least class A 15),
-   pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125),
-   the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250),
-   carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400),
-   areas imposing high wheel loads, e.g. docks, aircraft pavements (at least class E 600),
-   areas imposing particularly high wheel loads, e.g. aircraft pavements (Group 6, class F 900).
This European Standard is not applicable in isolation but only in combination with EN 124 1 and gives guidance for combinations of covers/gratings made of steel reinforced concrete with frames according to EN 124 2, EN 124 3, EN 124 5 and EN 124 6.
This European Standard is not applicable to:
-   concave gratings for class D 400 installed in carriageways of roads and hard shoulders and concave gratings for classes F 900 and E 600;
-   gratings/covers as part of prefabricated drainage channels according to EN 1433;
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts); and
-   surface boxes.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 124-2:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
SIST EN 124-2:2015

This European Standard is applicable to gully tops and manhole tops made of flake graphite cast iron and/or spheroidal graphite cast iron whether in combination with concrete or not, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in:
-   areas which can only be used by pedestrians and pedal cyclists (at least class A 15),
-   pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125),
-   the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250),
-   carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400),
-   areas imposing high wheel loads, e.g. docks, aircraft pavements (at least class E 600),
-   areas imposing particularly high wheel loads, e.g. aircraft pavements (class F 900).
This European Standard is not applicable in isolation but only in combination with EN 124 1 and gives guidance for combinations of covers/grating made from cast iron with frames according to EN 124 3, EN 124 4, EN 124 5 and EN 124 6.
This European Standard is not applicable to:
-   fillings installed on site, e.g. concrete, paving blocks, etc.,
-   concave gratings for classes D 400 installed in carriageways of roads and hard shoulders and concave gratings for classes F 900 and E 600,
-   gratings/covers as part of prefabricated drainage channels according to EN 1433,
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts), and
-   surface boxes.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 124-1:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
SIST EN 124-1:2015

This European Standard is applicable to manhole tops and gully tops with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers installed in areas subjected to pedestrian and/or vehicular traffic. It specifies definitions, classification, general principles of design, performance requirements and test methods for gully tops and manhole tops according to:
-   EN 124 2, for gully tops and manhole tops made of cast iron;
-   EN 124 3, for gully tops and manhole tops made of steel or aluminium alloy;
-   EN 124 4, for gully tops and manhole tops made of steel reinforced concrete;
-   EN 124 5, for gully tops and manhole tops made of composite materials;
-   EN 124 6, for gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U).
Part 1 is only applicable in combination with at least one of the standards EN 124 2, EN 124 3, EN 124 4, EN 124 5 and EN 124 6 each of which has this Part 1 as an integral part.
This European Standard is not applicable to:
-   gratings/covers as part of prefabricated drainage channels according to EN 1433,
-   floor and roof gullies in buildings which are specified in EN 1253 1,
-   surface boxes.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 124-5:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
SIST EN 124-5:2015

This European Standard is applicable to manhole tops and gully tops made of composite materials C1, C2 and C3 by using suitably controlled automatic processes that produce a single structure and that do not contain multiple pieces bonded together, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in:
-   areas which can only be used by pedestrians and pedal cyclists (class A 15),
-   pedestrian areas and comparable areas, car parks or car parking decks (class B 125),
-   the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (class C 250),
and in addition to manhole tops for use in
-   carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (class D 400).
This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/gratings made from composite materials with frames according to EN 124-2, EN 124-3, EN 124-4 and EN 124-6.
This document is not applicable to:
-   manhole tops and gully tops manufactured by means of hand lay-up method,
-   gratings/covers as part of prefabricated drainage channels according to EN 1433,
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts), and
-   surface boxes.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 124-6:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
SIST EN 124-6:2015

This European Standard applies to manhole tops and gully tops made of Polypropylene (PP), Polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) by a moulding or extrusion process, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in
-   areas which can only be used by pedestrians and pedal cyclists (class A 15), and
-   pedestrian areas and comparable areas, car parks or car parking decks (class B 125).
This European Standard gives guidance for combinations of covers/grating made of PP, PE or PVC–U with frames according to EN 124 2, EN 124 3, EN 124 4 and EN 124 5.
This European Standard is not applicable in isolation but only in combination with EN 124 1.
This European Standard is not applicable to:
-   rodding point covers according to EN 13598 1;
-   gratings/covers as part of prefabricated drainage channels according to EN 1433;
-   floor and roof gullies in buildings which are specified in EN 1253 (all parts);
-   surface boxes.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1433:2002/A1:2005(Amendment)
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
SIST EN 1433:2003/A1:2005

2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    3 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1433:2002/AC:2004(Corrigendum)
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
SIST EN 1433:2003/AC:2005

TC - Modification of Table A.3, footnote a plus modification of Scope and title of Figure A.3 in German version

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1433:2002(Main)
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
SIST EN 1433:2003

This European Standard specifies requirements for prefabricated linear drainage channels for the collection and conveyance of surface water when installed within areas subject to pedestrian and/or vehicular traffic. It applies to grid units, slot units and kerb units up to a clear opening of 1000 mm.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    55 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 1317-9:2023(Main)
Road restraint systems - Part 9: Impact tests and test methods for removable barrier sections
SIST-TS CEN/TS 1317-9:2024

This document specifies performance, categories and test methods for the assessment of removable barrier sections.
The transitions between the Removable Barrier Section and the two connected safety barriers are outside the scope of this document
and should be assessed according to CEN/TR Transitions: _.
The present document should be read in conjunction with EN 1317-1:2010 and EN 1317-2 2:2010 and EN 1317-5:2007+A2:2012

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day