EN ISO 12215-5:2018

Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008, including Amd 1:2014)

2017-06-01: Annex ZB

Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 5: Entwurfsdrücke für Einrumpffahrzeuge, Entwurfsspannungen, Ermittlung der Dimensionierung (ISO 12215-5:2008, einschließlich Amd 1:2014)

Petits navires - Construction de coques et échantillonnage - Partie 5: Pressions de conception pour monocoques, contraintes de conception, détermination de l'échantillonnage (ISO 12215-5:2008, y compris Amd 1:2014)

Mala plovila - Konstrukcija trupa in zahtevane lastnosti - 5. del: Načrtovani tlaki za trupe, načrtovane napetosti in ugotavljanje lastnosti (ISO 12215-5:2008,vključno z dopolnilom A1:2014)

Ta del standarda ISO 12215 se uporablja za določanje načrtovanih tlakov in napetosti ter za določanje zahtevanih lastnosti, vključno z notranjimi strukturnimi pripadniki malih plovil z enim trupom, izdelanih iz z vlakni ojačenih polimernih materialov, aluminija ali jeklenih zlitin, zlepljenega lesa ali drugega ustreznega materiala za gradnjo plovil, z dolžino trupa (LH) med 2,5 m in 24 m v skladu s standardom ISO 8666. Uporablja se le za plovila v brezhibnem stanju.
Uporablja se le za plovila z najvišjo hitrostjo 50 vozlov v pogojih mLDC.
Ocena običajno zajema vse dele plovila, ki se štejejo za vodoodporne ali odporne na vremenske vplive, ko se ocenjujejo stabilnost, nadvodje in vzgon v skladu s standardom ISO 12217, ter so bistveni za varnost plovila in ljudi na krovu.
Za vse zahtevane lastnosti plovila se ta del standarda ISO 12215 uporablja v povezavi s 6. delom za podrobnosti, 7. delom za plovila z več trupi, 8. delom za krmila ter 9. delom za dodatke in priključke opreme.
Opredelitev zahtevanih lastnosti oken, naoknic, pokrovov in vrat je v skladu s
standardom ISO 12216. Nosilna konstrukcija za te elemente je v skladu s tem delom standarda ISO 12215.
OPOMBA 1: Zahtevane lastnosti, izpeljane iz tega dela standarda ISO 12215, se nanašajo predvsem na plovila za rekreacijo, vključno z rekreacijskimi čarterskimi plovili, in morda niso primerne za zmogljiva dirkalna plovila.
OPOMBA 2: Ta del standarda ISO 12215 temelji na predpostavki, da na zahtevane lastnosti vplivajo samo lokalne obremenitve.
OPOMBA 3: Za zahtevane lastnosti iz tega dela standarda ISO 12215 se šteje, da ustrezajo minimalnim zahtevam glede trdnosti motornih in jadrnih plovil, ki so varno ter odgovorno upravljana ob ustreznem poznavanju prevladujočih pogojev.
Tlačne in obremenitvene vrednosti so običajno izražene v paskalih, kilopaskalih ali megapaskalih. Za boljše razumevanje uporabnikov tega dela standarda ISO 12215 so tlačne vrednosti izražene v kilonewtonih na kvadratni meter (1 kN/m2 = 1 kPa), obremenitve ali prilagodljivi moduli pa v newtonih na kvadratni milimeter (1 N/mm2 = 1 MPa).

General Information

• Status: Withdrawn
• Publication Date: 25-Sep-2018
• Withdrawal Date: 11-Jun-2019
• ICS: 47.020.10 - Hulls and their structure elements
• ICS: 47.080 - Small craft
• Technical Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Drafting Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 12-Jun-2019
• Directive: 2003/44/EC - Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Mandate: M/542 - [C(2015)8736] Standardisation Request to the European Committee for Standardisation and the European Committee for Electro-technical Standardisation as regards recreational craft and personal watercraft in support of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC.
• Ref Project: SIST EN ISO 12215-5:2018 - Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008,vključno z dopolnilom A1:2014)

Relations

• Replaces: EN ISO 12215-5:2008 - Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
• Effective Date: 03-Oct-2018
• Replaces: EN ISO 12215-5:2008/A1:2014 - Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination - Amendment 1 (ISO 12215-5:2008/Amd 1:2014)
• Effective Date: 03-Oct-2018
• Replaced By: EN ISO 12215-5:2019 - Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019, Corrected version 2024-03)
• Effective Date: 19-Jun-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2018
1DGRPHãþD
SIST EN ISO 12215-5:2008
SIST EN ISO 12215-5:2008/A1:2014
0DODSORYLOD.RQVWUXNFLMDWUXSDLQ]DKWHYDQHODVWQRVWLGHO1DþUWRYDQLWODNL]D
WUXSHQDþUWRYDQHQDSHWRVWLLQXJRWDYOMDQMHODVWQRVWL,62YNOMXþQR]
GRSROQLORP$
6PDOOFUDIW+XOOFRQVWUXFWLRQDQGVFDQWOLQJV3DUW'HVLJQSUHVVXUHVIRUPRQRKXOOV
GHVLJQVWUHVVHVVFDQWOLQJVGHWHUPLQDWLRQ,62YNOMXþQR]GRSROQLORP
$
.OHLQH:DVVHUIDKU]HXJH5XPSIEDXZHLVHXQG'LPHQVLRQLHUXQJ7HLO
(QWZXUIVGUFNHIU(LQUXPSIIDKU]HXJH(QWZXUIVVSDQQXQJHQ(UPLWWOXQJGHU
'LPHQVLRQLHUXQJ,62YNOMXþQR]GRSROQLORP$
3HWLWVQDYLUHV&RQVWUXFWLRQGHODFRTXHHWpFKDQWLOORQQDJH3DUWLH3UHVVLRQVGH
FRQFHSWLRQSRXUPRQRFRTXHVFRQWUDLQWHVGHFRQFHSWLRQGpWHUPLQDWLRQGH
O
pFKDQWLOORQQDJH,62YNOMXþQR]GRSROQLORP$
Ta slovenski standard je istoveten z: EN ISO 12215-5:2018
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.080 ýROQL Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 12215-5
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2018
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 12215-5:2008
English Version
Small craft - Hull construction and scantlings - Part 5:
Design pressures for monohulls, design stresses, scantlings
determination (ISO 12215-5:2008, including Amd 1:2014)
Petits navires - Construction de coques et Kleine Wasserfahrzeuge - Rumpfbauweise und
échantillonnage - Partie 5: Pressions de conception Dimensionierung - Teil 5: Entwurfsdrücke für
pour monocoques, contraintes de conception, Einrumpffahrzeuge, Entwurfsspannungen, Ermittlung
détermination de l'échantillonnage (ISO 12215-5:2008, der Dimensionierung (ISO 12215-5:2008,
y compris Amd 1:2014) einschließlich Amd 1:2014)
This European Standard was approved by CEN on 16 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12215-5:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4

European foreword
The text of ISO 12215-5:2008, including Amd 1:2014 has been prepared by Technical Committee
ISO/TC 188 “Small craft” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 12215-5:2018.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall be
withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12215-5:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
Endorsement notice
The text of ISO 12215-5:2008, including Amd 1:2014 has been approved by CEN as EN ISO 12215-5:2018
without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered
This European standard has been prepared under a Commission’s standardization request M/542
C(2015) 8736 final to provide one voluntary means of conforming to Essential Requirements of Directive
2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive, compliance
with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of
this standard, a presumption of conformity with the corresponding Essential Requirements of that
Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I of Directive
2013/53/EU
Essential Clause(s)/sub- Remarks/Notes
Requirements of clause(s) of
Directive this EN
2013/53/EU
Annex I, Part A, 2.5 – 12
Owner’s manual
Annex I, Part A, 3.1 - All clauses The purpose of this part of this standard is to achieve overall
Structure structural strength that ensures the watertight and

weathertight integrity of the watercraft.
The standard provides requirements for scantling
determination for monohull craft with a maximum speed ≤ 50
knots in m conditions constructed from fibre reinforced
LDC
plastics, aluminium or steel alloys, glued wood (laminate) or
similar suitable materials.
It should be further noted that:
— For the complete scantlings of the watercraft, this
part of ISO 12215 shall be used in conjunction with
Part 6, for details, Part 7 for multihulls, Part 8 for
rudders, Part 9 for appendages and Part 10 for rig
loads and rig attachments;
— The scantling determination of windows,
portlights, deadlights, hatches and doors, shall be in
accordance with ISO 12216, the structure supporting
these elements being in accordance with this part of
ISO 12215.
Annex A (see note to Annex A) provides a link to a software
application using Microsoft excel to support this part and the
determination of scantlings for watercraft in design categories
A-C up to L =12 m and in design category D up to L =24 m that
H H
are constructed of GRP, steel and aluminium.

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 12215-5
First edition
2008-04-15
Small craft — Hull construction
and scantlings —
Part 5:
Design pressures for monohulls, design
stresses, scantlings determination
Petits navires — Construction de la coque et échantillonnage —
Partie 5: Pressions de conception pour monocoques, contraintes de
conception, détermination de l'échantillonnage

Reference number
ISO 12215-5:2008(E)
©
ISO 2008
ISO 12215-5:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved

ISO 12215-5:2008(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Symbols . 4
5 General. 6
6 Dimensions, data and areas . 7
6.1 Dimensions and data. 7
6.2 Areas . 7
7 Pressure adjusting factors . 9
7.1 General. 9
7.2 Design category factor k . 9
DC
7.3 Dynamic load factor n . 9
CG
7.4 Longitudinal pressure distribution factor k . 10
L
7.5 Area pressure reduction factor k . 11
AR
7.6 Hull side pressure reduction factor k . 12
Z
7.7 Superstructure and deckhouse pressure reduction factor k . 13
SUP
7.8 Light and stable sailing craft pressure correcting factor for slamming k . 13
SLS
8 Design pressures. 14
8.1 Motor craft design pressure . 14
8.2 Sailing craft design pressure . 16
8.3 Watertight bulkheads and integral tank boundaries design pressure. 16
8.4 Design pressures for structural components where k would be u 0,25 . 18
AR
9 Dimensions of panels and stiffeners. 19
9.1 Dimensions of plating panels.
...