Dust explosion venting protective systems

This European Standard specifies the basic requirements of design for the selection of a dust explosion venting protective system. The standard is one of a series including EN 14797, Explosion venting devices and EN 14460, Explosion resistant equipment. The three standards together represent the concept of dust explosion venting. To avoid transfer of explosions to other communicating equipment, one should also consider applying EN 15089 Explosion Isolation Systems.
This European Standard covers:
-   vent sizing to protect an enclosure against the internal pressure effects of a dust explosion;
-   flame and pressure effects outside the enclosure;
-   recoil forces;
-   influence of vent ducts;
-   hybrid mixtures.
This European Standard is not intended to provide design and application rules against effects generated by detonation reactions or runaway exothermic reactions. This European Standard does not cover fire risks arising from materials either processed, used or released by the equipment or from materials that make up equipment and buildings. This European Standard does not cover the design, construction, testing and certification of explosion venting devices that are used to achieve explosion venting

Schutzsysteme zur Druckentlastung von Staubexplosionen

Diese Europäische Norm legt die grundlegenden Anforderungen an die konstruktive Gestaltung und für die Auswahl eines Schutzsystems zur Druckentlastung von Staubexplosionen fest. Diese Norm wurde im Rahmen der Reihe erstellt, zu der EN 14797, Einrichtungen zur Explosionsdruckentlastung, und EN 14460, Explosionsfeste Geräte, gehören. Die drei Normen zusammen bilden das Konzept der Druckentlastung von Staubexplosionen. Zur Vermeidung der Übertragung von Explosionen auf andere in Verbindung stehende Einrichtungen sollte auch EN 15089 Explosions Entkopplungssysteme beachtet und angewendet werden.
Diese Europäische Norm deckt Folgendes ab:
-   Größe der Entlastungsöffnung, um gegen die inneren Druckauswirkungen einer Staubexplosion zu schützen;
-   Auswirkungen von Flammen und von Druck außerhalb des Behälters;
-   Rückstoßkräfte;
-   Einfluss der Abblasrohre;
-   hybride Gemische.
Diese Europäische Norm gibt keine Gestaltungs  und Anwendungsvorschriften, durch die Auswirkungen von Detonationsreaktionen oder unkontrollierten exothermen Reaktionen vermieden werden können. Brand-gefahren, die entweder von den verarbeiteten Materialien, von den vom Gerät benutzten oder freigesetzten Materialien ausgehen oder die durch Materialien hervorgerufen werden, aus denen Geräte und Gebäude bestehen, sind nicht Gegenstand dieser Europäischen Norm. Konstruktive Gestaltung, Fertigung, Prüfung und Zertifizierung von Einrichtungen, die im Fall von Explosionen für die Druckentlastung verwendet werden, sind ebenfalls nicht Gegenstand dieser Europäischen Norm. )

Systèmes de protection par évent contre les explosions de poussières

La présente Norme européenne spécifie les exigences fondamentales se rapportant à la conception et au choix d'un système de protection par évent contre les explosions de poussières. La présente Norme européenne fait partie d'une série à laquelle appartiennent également l'EN 14797, Dispositifs de décharge d'explosion et l'EN 14460, Appareil résistant à l'explosion. Ensemble, ces trois normes illustrent le concept de protection par évent contre les explosions. Pour éviter la propagation de l'explosion à d'autres équipements communicants, il convient également de tenir compte de l'EN 15089, Systèmes d'isolement d'une explosion.
La présente Norme européenne traite des aspects suivants :
-   le dimensionnement des évents pour la protection d'une enceinte contre les effets de la pression interne d'une explosion de poussières ;
-   les effets de la flamme et de la pression à l'extérieur de l'enceinte ;
-   les forces de recul ;
-   l'influence des canalisations de décharge ;
-   les mélanges hybrides.
La présente Norme européenne n'est pas destinée à fournir des règles de conception et d'application contre les effets engendrés par les réactions de détonation ou l'emballement des réactions exothermiques. Elle ne traite pas des risques d'incendie provenant soit des matériaux traités, utilisés ou émis par les appareils, soit des matériaux qui constituent les appareils et les bâtiments. Elle ne traite pas non plus de la conception, de la construction, des essais et de la certification des dispositifs de décharge d'explosion ).

Zaščitni sistemi za razbremenitev tlaka eksplozije prahu

Ta evropski standard določa osnovne zahteve glede oblike za izbor zaščitnega sistema za razbremenitev tlaka eksplozije prahu. Standard je eden iz serije standardov, ki vključujejo naprave za razbremenitev tlaka eksplozije iz standarda EN 14797 in opremo, odporno na eksplozije, iz standarda EN 14460. Ti trije standardi skupaj predstavljajo koncept razbremenitve tlaka eksplozije prahu. Da bi se preprečil prenos eksplozij na drugo komunikacijsko opremo, je treba preučiti tudi uporabo ločevalnih sistemov eksplozij iz standarda EN 15089. Ta evropski standard zajema: določitev velikosti oddušnika za zaščito okrova pred učinki notranjega tlaka eksplozije prahu; učinke plamena in tlaka zunaj okrova; sile odsunka; vpliv kanalov oddušnika. Namen tega evropskega standarda ni določiti pravil o obliki in uporabi za zaščito pred učinki reakcij detonacije ali eksotermnih reakcij brez nadzora. Ta evropski standard ne zajema nevarnosti požara zaradi materialov, ki jih oprema obdeluje, uporablja ali sprošča, ali materialov, iz katerih so oprema in zgradbe narejeni. Ta evropski standard ne zajema oblike, gradnje, preskušanja in certificiranja naprav za razbremenitev tlaka eksplozij, ki se uporabljajo za doseganje razbremenitve tlaka eksplozij.

General Information

Status
Published
Publication Date
07-Aug-2012
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Apr-2021

Relations

Buy Standard

Standard
EN 14491:2012
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzsysteme zur Druckentlastung von StaubexplosionenSystèmes de protection par évent contre les explosions de poussièresDust explosion venting protective systems13.230Varstvo pred eksplozijoExplosion protectionICS:Ta slovenski standard je istoveten z:EN 14491:2012SIST EN 14491:2012en,fr,de01-oktober-2012SIST EN 14491:2012SLOVENSKI
STANDARDSIST EN 14491:2006/AC:2009SIST EN 14491:20061DGRPHãþD



SIST EN 14491:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14491
August 2012 ICS 13.230 Supersedes EN 14491:2006English Version
Dust explosion venting protective systems
Systèmes de protection par évent contre les explosions de poussières
Schutzsysteme zur Druckentlastung von StaubexplosionenThis European Standard was approved by CEN on 30 June 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14491:2012: ESIST EN 14491:2012



EN 14491:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Venting of enclosures .65 Sizing of vent areas .75.1 General .75.2 Venting of isolated enclosures .85.3 Special dust cloud conditions .95.3.1 General .95.3.2 Pneumatic conveying of product with axial introduction into vessels and silos .95.3.3 Pneumatic conveying of the product with tangential introduction into vessels and silos. 105.3.4 Free fall filling . 115.4 Protection of interconnected enclosures . 115.5 Protection of pipes . 125.6 Influences of vent ducts . 135.7 Design of vent ducts . 145.8 Hybrid mixtures . 156 Supplementary design considerations .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.