CEN ISO/TS 80004-6:2015
(Main)Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013)
Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013)
ISO/TS 80004-6:2013 lists terms and definitions relevant to the characterization of nano-objects.
Nanotechnologien - Fachwörterverzeichnis - Teil 6: Charakterisierung von Nanoobjekten (ISO/TS 80004-6:2013)
Diese Technische Spezifikation führt Begriffe auf, die für die Charakterisierung von Nanoobjekten maßgebend sind.
Nanotechnologies - Vocabulaire - Partie 6: Caractérisation des nano-objets (ISO/TS 80004-6:2013)
L'ISO/TS 80004-6:2013 donne la liste des termes et définitions applicables à la caractérisation des nano-objets.
Nanotehnologije - Slovar - 6. del: Karakterizacija nanoobjektov (ISO/TS 80004-6:2013)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 80004-6:2015
01-julij-2015
Nanotehnologije - Slovar - 6. del: Karakterizacija nanoobjektov (ISO/TS 80004-
6:2013)
Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-
6:2013)
Nanotechnologien - Fachwörterverzeichnis - Teil 6: Charakterisierung von Nanoobjekten
(ISO/TS 80004-6:2013)
Nanotechnologies - Vocabulaire - Partie 6: Caractérisation des nano-objets (ISO/TS
80004-6:2013)
Ta slovenski standard je istoveten z: CEN ISO/TS 80004-6:2015
ICS:
01.040.07 Naravoslovne in uporabne Natural and applied sciences
vede (Slovarji) (Vocabularies)
07.120 Nanotehnologije Nanotechnologies
SIST-TS CEN ISO/TS 80004-6:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 80004-6:2015
---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 80004-6:2015
TECHNICAL SPECIFICATION
CEN ISO/TS 80004-6
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
May 2015
ICS 07.030; 01.040.07
English Version
Nanotechnologies - Vocabulary - Part 6: Nano-object
characterization (ISO/TS 80004-6:2013)
Nanotechnologies - Vocabulaire - Partie 6: Caractérisation Nanotechnologien - Fachwörterverzeichnis - Teil 6:
des nano-objets (ISO/TS 80004-6:2013) Charakterisierung von Nanoobjekten (ISO/TS 80004-
6:2013)
This Technical Specification (CEN/TS) was approved by CEN on 16 May 2015 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 80004-6:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 80004-6:2015
CEN ISO/TS 80004-6:2015 (E)
Contents
Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 80004-6:2015
CEN ISO/TS 80004-6:2015 (E)
Foreword
The text of ISO/TS 80004-6:2013 has been prepared by Technical Committee ISO/TC 229
“Nanotechnologies” of the International Organization for Standardization (ISO) and has been taken over as
CEN ISO/TS 80004-6:2015 by Technical Committee CEN/TC 352 “Nanotechnologies” the secretariat of which
is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 80004-6:2013 has been approved by CEN as CEN ISO/TS 80004-6:2015 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST-TS CEN ISO/TS 80004-6:2015
---------------------- Page: 6 ----------------------
SIST-TS CEN ISO/TS 80004-6:2015
TECHNICAL ISO/TS
SPECIFICATION 80004-6
First edition
2013-11-01
Nanotechnologies — Vocabulary —
Part 6:
Nano-object characterization
Nanotechnologies — Vocabulaire —
Partie 6: Caractérisation d’un nano-objet
Reference number
ISO/TS 80004-6:2013(E)
©
ISO 2013
---------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.