Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)

MINOR REVISION

Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil 2: Umfassende Qualitätsanforderungen (ISO 3834-2:2021)

Dieses Dokument definiert umfassende Qualitätsanforderungen beim Schmelzschweißen von metallischen Werkstoffen in Werkstätten und/oder auf Baustellen.

Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 2: Exigences de qualité complète (ISO 3834-2:2021)

Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 2. del: Obširnejše zahteve za kakovost (ISO 3834-2:2021)

General Information

Status
Published
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
28-Apr-2021
Completion Date
28-Apr-2021

RELATIONS

Buy Standard

Standard
EN ISO 3834-2:2021
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Draft
prEN ISO 3834-2:2021
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 3834-2:2021
01-junij-2021
Nadomešča:
SIST EN ISO 3834-2:2006

Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 2. del: Obširnejše

zahteve za kakovost (ISO 3834-2:2021)

Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive

quality requirements (ISO 3834-2:2021)

Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil

2: Umfassende Qualitätsanforderungen (ISO 3834-2:2021)
Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 2:
Exigences de qualité complète (ISO 3834-2:2021)
Ta slovenski standard je istoveten z: EN ISO 3834-2:2021
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 3834-2:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3834-2:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 3834-2:2021
EN ISO 3834-2
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2021
EUROPÄISCHE NORM
ICS 25.160.01 Supersedes EN ISO 3834-2:2005
English Version
Quality requirements for fusion welding of metallic
materials - Part 2: Comprehensive quality requirements
(ISO 3834-2:2021)

Exigences de qualité en soudage par fusion des Qualitätsanforderungen für das Schmelzschweißen von

matériaux métalliques - Partie 2: Exigences de qualité metallischen Werkstoffen - Teil 2: Umfassende

complète (ISO 3834-2:2021) Qualitätsanforderungen (ISO 3834-2:2021)
This European Standard was approved by CEN on 10 April 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3834-2:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3834-2:2021
EN ISO 3834-2:2021 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 3834-2:2021
EN ISO 3834-2:2021 (E)
European foreword

This document (EN ISO 3834-2:2021) has been prepared by Technical Committee ISO/TC 44 "Welding

and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied

processes” the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by October 2021, and conflicting national standards shall

be withdrawn at the latest by October 2021.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 3834-2:2005.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 3834-2:2021 has been approved by CEN as EN ISO 3834-2:2021 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 3834-2:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 3834-2:2021
INTERNATIONAL ISO
STANDARD 3834-2
Third edition
2021-04
Quality requirements for fusion
welding of metallic materials —
Part 2:
Comprehensive quality requirements
Exigences de qualité en soudage par fusion des matériaux
métalliques —
Partie 2: Exigences de qualité complète
Reference number
ISO 3834-2:2021(E)
ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 3834-2:2021
ISO 3834-2:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 3834-2:2021
ISO 3834-2:2021(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Use of this document ........................................................................................................................................................................................ 1

5 Review of requirements and technical review ...................................................................................................................... 2

5.1 General ........................................................................................................................................................................................................... 2

5.2 Review of requirements .................................................................................................................................................................. 2

5.3 Technical review .................................................................................................................................................................................... 2

6 Sub-contracting ...................................................................................................................................................................................................... 3

7 Welding personnel.............................................................................................................................................................................................. 3

7.1 General ........................................................................................................................................................................................................... 3

7.2 Welders and welding operators ............................................................................................................................................... 3

7.3 Welding coordination personnel ............................................................................................................................................. 3

8 Inspection and testing personnel ....................................................................................................................................................... 4

8.1 General ........................................................................................................................................................................................................... 4

8.2 Non-destructive testing personnel ........................................................................................................................................ 4

9 Equipment ................................................................................................................................................................................................................... 4

9.1 Production and test equipment ................................................................................................................................................ 4

9.2 Description of production equipment ................................................................................................................................ 5

9.3 Suitability of equipment ................................................................................................................................................................. 5

9.4 New equipment ...................................................................................................................................................................................... 5

9.5 Maintenance of equipment ........................................................................................................................................................... 5

10 Welding and related activities ................................................................................................................................................................ 5

10.1 Production planning ........................................................................................................................................................................... 5

10.2 Welding procedure specifications .......................................................................................................................................... 6

10.3 Qualification of the welding procedures ........................................................................................................................... 6

10.4 Work instructions ................................................................................................................................................................................. 6

10.5 Procedures for preparation and control of documents ....................................................................................... 6

11 Welding consumables...................................................................................................................................................................................... 7

11.1 General ........................................................................................................................................................................................................... 7

11.2 Batch testing .............................................................................................................................................................................................. 7

11.3 Storage and handling ......................................................................................................................................................................... 7

12 Storage of parent materials ....................................................................................................................................................................... 7

13 Post-weld heat treatment ............................................................................................................................................................................ 7

14 Inspection and testing .................................................................................................................................................................................... 7

14.1 General ........................................................................................................................................................................................................... 7

14.2 Inspection and testing before welding ............................................................................................................................... 7

14.3 Inspection and testing during welding .............................................................................................................................. 8

14.4 Inspection and testing after welding ................................................................................................................................... 8

14.5 Inspection and test status .............................................................................................................................................................. 8

15 Non-conformance and corrective actions ................................................................................................................................... 9

16 Calibration and validation of measuring, inspection and test equipment ...............................................9

17 Identification and traceability ............................................................................................................................................................... 9

18 Quality records ....................................................................................................................................................................................................10

Bibliography .............................................................................................................................................................................................................................11

© ISO 2021 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 3834-2:2021
ISO 3834-2:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,

Subcommittee SC 10, Quality management in the field of welding, in collaboration with the European

Committee for Standardization (CEN) Technical Committee CEN/TC 121, Welding and allied processes,

in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

This third edition cancels and replaces the second edition (ISO 3834-2:2005), of which it constitutes a

minor revision.
The main changes compared to the previous edition are as follows:
— editorial revisions;
— update of references to the latest edition of ISO 3834-5;

— rewrite of Clause 16 on calibration and validation of measuring, inspection and test equipment.

A list of all parts in the ISO 3834 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.

Official interpretations, where they exist, are available from this page: https:// committee .iso .org/ sites/

tc44/ home/ interpretation .html.
iv © ISO 2021 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 3834-2:2021
INTERNATIONAL STANDARD ISO 3834-2:2021(E)
Quality requirements for fusion welding of metallic
materials —
Part 2:
Comprehensive quality requirements
1 Scope

This document defines comprehensive quality requirements for fusion welding of metallic materials

both in workshops and at field installation sites.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 3834-1, Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the selection

of the appropriate level of quality requirements

ISO 3834-5:—, Quality requirements for fusion welding of metallic materials — Part 5: Documents with

which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3

or ISO 3834-4
3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 3834-1 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 Use of this document
For general information on the use of this document, ISO 3834-1 shall be used.

In order to fulfil the quality requirements given in this document, the conformity to relevant documents

given in ISO 3834-5 shall be verified.

In certain situations, e.g. where manufacturing is more suited to ISO 3834-3 or ISO 3834-4, or where

particular operations, such as heat treatment, are not undertaken, the requirements detailed in this

document may be selectively amended or deleted.

Otherwise, the requirements contained within this document shall be adopted in full.

1) Under preparation. (Stage at the time of publi
...

SLOVENSKI STANDARD
oSIST prEN ISO 3834-2:2021
01-februar-2021

Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 2. del: Obširnejše

zahteve za kakovost (ISO/FDIS 3834-2:2020)

Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive

quality requirements (ISO/FDIS 3834-2:2020)

Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil

2: Umfassende Qualitätsanforderungen (ISO/FDIS 3834-2:2020)
Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 2:
Exigences de qualité complète (ISO/FDIS 3834-2:2020)
Ta slovenski standard je istoveten z: prEN ISO 3834-2
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
25.160.10 Varilni postopki in varjenje Welding processes
oSIST prEN ISO 3834-2:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 3834-2:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 3834-2:2021
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 3834-2
ISO/TC 44/SC 10
Quality requirements for fusion
Secretariat: DIN
welding of metallic materials —
Voting begins on:
2020-12-15
Part 2:
Voting terminates on:
Comprehensive quality requirements
2021-03-09
Exigences de qualité en soudage par fusion des matériaux
métalliques —
Partie 2: Exigences de qualité complète
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 3834-2:2020(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 3834-2:2021
ISO/FDIS 3834-2:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 3834-2:2021
ISO/FDIS 3834-2:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Use of this document ........................................................................................................................................................................................ 1

5 Review of requirements and technical review ...................................................................................................................... 2

5.1 General ........................................................................................................................................................................................................... 2

5.2 Review of requirements .................................................................................................................................................................. 2

5.3 Technical review .................................................................................................................................................................................... 2

6 Sub-contracting ...................................................................................................................................................................................................... 3

7 Welding personnel.............................................................................................................................................................................................. 3

7.1 General ........................................................................................................................................................................................................... 3

7.2 Welders and welding operators ............................................................................................................................................... 3

7.3 Welding coordination personnel ............................................................................................................................................. 3

8 Inspection and testing personnel ....................................................................................................................................................... 4

8.1 General ........................................................................................................................................................................................................... 4

8.2 Non-destructive testing personnel ........................................................................................................................................ 4

9 Equipment ................................................................................................................................................................................................................... 4

9.1 Production and test equipment ................................................................................................................................................ 4

9.2 Description of production equipment ................................................................................................................................ 5

9.3 Suitability of equipment ................................................................................................................................................................. 5

9.4 New equipment ...................................................................................................................................................................................... 5

9.5 Maintenance of equipment ........................................................................................................................................................... 5

10 Welding and related activities ................................................................................................................................................................ 5

10.1 Production planning ........................................................................................................................................................................... 5

10.2 Welding procedure specifications .......................................................................................................................................... 6

10.3 Qualification of the welding procedures ........................................................................................................................... 6

10.4 Work instructions ................................................................................................................................................................................. 6

10.5 Procedures for preparation and control of documents ....................................................................................... 6

11 Welding consumables...................................................................................................................................................................................... 7

11.1 General ........................................................................................................................................................................................................... 7

11.2 Batch testing .............................................................................................................................................................................................. 7

11.3 Storage and handling ......................................................................................................................................................................... 7

12 Storage of parent materials ....................................................................................................................................................................... 7

13 Post-weld heat treatment ............................................................................................................................................................................ 7

14 Inspection and testing .................................................................................................................................................................................... 7

14.1 General ........................................................................................................................................................................................................... 7

14.2 Inspection and testing before welding ............................................................................................................................... 7

14.3 Inspection and testing during welding .............................................................................................................................. 8

14.4 Inspection and testing after welding ................................................................................................................................... 8

14.5 Inspection and test status .............................................................................................................................................................. 8

15 Non-conformance and corrective actions ................................................................................................................................... 9

16 Calibration and validation of measuring, inspection and test equipment ...............................................9

17 Identification and traceability ............................................................................................................................................................... 9

18 Quality records ....................................................................................................................................................................................................10

Bibliography .............................................................................................................................................................................................................................11

© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 3834-2:2021
ISO/FDIS 3834-2:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,

Subcommittee SC 10, Quality management in the field of welding, in collaboration with the European

Committee for Standardization (CEN) Technical Committee CEN/TC 121, Welding and allied processes,

in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

This third edition cancels and replaces the second edition (ISO 3834-2:2005), of which it constitutes a

minor revision.
The main changes compared to the previous edition are as follows:
— editorial revisions;
— in 7.2 and 8.2, update of references to the latest edition of ISO 3834-5.

— rewrite of Clause 16 on calibration and validation of measuring, inspection and test equipment.

A list of all parts in the ISO 3834 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.

Official interpretations, where they exist, are available from this page: https:// committee .iso .org/ sites/

tc44/ home/ interpretation .html.
iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 3834-2:2021
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 3834-2:2020(E)
Quality requirements for fusion welding of metallic
materials —
Part 2:
Comprehensive quality requirements
1 Scope

This document defines comprehensive quality requirements for fusion welding of metallic materials

both in workshops and at field installation sites.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 3834-1:—, Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the

selection of the appropriate level of quality requirements

ISO/DIS 3834-5:—, Quality requirements for fusion welding of metallic materials — Part 5: Documents

with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2,

ISO 3834-3 or ISO 3834-4
3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 3834-1 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 Use of this document
For general information on the use of this document, ISO 3834-1 shall be used.

In order to fulfil the quality requirements given in this document, the conformity to relevant documents

given in ISO 3834-5 shall be verified.

In certain situations, e.g. where manufacturing is more suited to ISO 3834-3 or ISO 3834-4, or where

particular operations, such as heat treatment, are not undertaken, the requirements detailed in this

document may be selectively amended or deleted.

Otherwise, the requirements contained within this document shall be adopted in full.

1) Under preparation. (Stage at the time of publication: ISO/DIS 3834-1:2020).
2) Under preparation. (Stage at the time of publication: ISO/DIS 3834-5:2020).
© ISO 2020 – All rights reserved 1
---------------------- Page: 7 ----------------------
oSIST prEN ISO 3834-2:2021
ISO/FDIS 3834-2:2020(E)
5 Review of requirements and technical review
5.1 General

The manufacturer shall review the contractual requirements and any other requirements, together

with any technical data provided by the purchaser or in-house data when the construction is designed

by the manufacturer. The manufacturer shall establish that all information necessary to carry out

the manufacturing operations is complete and available prior to the commencement of the work. The

manufacturer shall affirm its capability to meet all requirements and shall ensure adequate planning of

all quality-related activities.
The review of requirements is carried out by the manufacturer to verify that:
— the work content is within its capability to perform,
— sufficient resources are available to achieve delivery schedules and
— documentation is clear and unambiguous.

The manufacturer shall ensure that any variations between the contract and any previous quotation are

identified and the purchaser notified of any programme, cost or engineering changes that can result.

Items in 5.2 are typically considered at or before the time of the review of requirements. Items in 5.3

usually form part of the technical review and are considered during the initial planning stage.

When a contract does not exist, e.g. items made for stock, the manufacturer is required to take into

consideration the requirements of 5.2 while carrying out the technical review (see 5.3).

5.2 Review of requirements
The following aspects shall be considered:
a) the product standard to be used, togeth
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.