iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

ENV 12290:1996

(Main)

Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties

Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties

This ENV... specifies the conditions for determination of compressive properties of ceramic matrix composite materials with continuous fibre reinforcement for temperatures up to 2000°C under vacuum or a gas atmosphere which is inert to the material under test.

Hochleistungskeramik - Mechanische Eigenschaften von keramischen Verbundwerkstoffen bei hoher Temperatur in inerter Atmosphäre - Bestimmung der Eigenschaften unter Druck

Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température en atmosphère neutre - Détermination des caractéristiques en compression

Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties

General Information

Status
Withdrawn
Publication Date
20-Aug-1996
Withdrawal Date
14-Jun-2005
ICS
81.060.99 - Other standards related to ceramics
Technical Committee
CEN/TC 184 - Advanced technical ceramics
Drafting Committee
CEN/TC 184/SC 1 - Ceramic composites
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Jun-2005
Completion Date
15-Jun-2005
Mandate
M/076 - Mandate to CEN/CENELEC for standardization in the field of advanced ceramics
Ref Project
SIST ENV 12290:2000 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties

Relations

Replaced By
EN 12290:2005 - Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties
Effective Date
22-Dec-2008

Buy Standard

ENV 12290:2000ENV 12290:2000
PreviousNext
Standardization document
ENV 12290:2000
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 12290:2000
01-december-2000
Advanced technical ceramics - Mechanical properties of ceramic composites at
high temperature under inert atmosphere - Determination of compression
properties
Advanced technical ceramics - Mechanical properties of ceramic composites at high
temperature under inert atmosphere - Determination of compression properties
Hochleistungskeramik - Mechanische Eigenschaften von keramischen
Verbundwerkstoffen bei hoher Temperatur in inerter Atmosphäre - Bestimmung der
Eigenschaften unter Druck
Céramiques techniques avancées - Propriétés mécaniques des céramiques composites
a haute température en atmosphere neutre - Détermination des caractéristiques en
compression
Ta slovenski standard je istoveten z: ENV 12290:1996
ICS:
81.060.30 Sodobna keramika Advanced ceramics
SIST ENV 12290:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 12290:2000

---------------------- Page: 2 ----------------------

SIST ENV 12290:2000

---------------------- Page: 3 ----------------------

SIST ENV 12290:2000

---------------------- Page: 4 ----------------------

SIST ENV 12290:2000

---------------------- Page: 5 ----------------------

SIST ENV 12290:2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 820-2:2003(Main)
Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation
SIST EN 820-2:2004

This European Standard specifies a method for the determination of the temperature at which the self-loaded deformation of a ceramic test piece commences and the extent of this deformation.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 658-1:1998(Main)
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties
SIST EN 658-1:2000

This part of EN 658 specifies the conditions for determination of tensile properties of ceramic matrix composite materials with continuous fibre reinforcement at ambient temperature. This standard applies to all ceramic matrix composites with a continuous fibre reinforcement, unidirectional (1D), bidirectional (2D) and tridirectional (xD, with 2

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 821-2:1997(Main)
Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
SIST EN 821-2:2000

This part of EN 821 describes a method for the determination of thermal diffusivity of advanced monolithic technical ceramics, to an accuracy of approximately +/- 5%. It is suitable for the measurement of thermal diffusivity values in the range 0.1 mm2/s to 1000 mm2/s at temperatures greater than -180°C.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 820-2:2003(Main)
Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation
SIST EN 820-2:2004

This European Standard specifies a method for the determination of the temperature at which the self-loaded deformation of a ceramic test piece commences and the extent of this deformation.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 658-1:1998(Main)
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties
SIST EN 658-1:2000

This part of EN 658 specifies the conditions for determination of tensile properties of ceramic matrix composite materials with continuous fibre reinforcement at ambient temperature. This standard applies to all ceramic matrix composites with a continuous fibre reinforcement, unidirectional (1D), bidirectional (2D) and tridirectional (xD, with 2

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 821-2:1997(Main)
Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
SIST EN 821-2:2000

This part of EN 821 describes a method for the determination of thermal diffusivity of advanced monolithic technical ceramics, to an accuracy of approximately +/- 5%. It is suitable for the measurement of thermal diffusivity values in the range 0.1 mm2/s to 1000 mm2/s at temperatures greater than -180°C.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/oprA2:2023
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day