Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements

This document specifies requirements for the design and dimensions of the brake disc.
This document applies to discs pressed or shrunk onto the axle or drive shaft of railway rolling stock by a cylindrical or conic tapered interference fit.
This document applies to discs having one or more disc brake rings, each having two axially separated friction faces.

Bahnanwendungen - Bremsscheiben für Schienenfahrzeuge - Teil 1: Wellenbremsscheiben, aufgepresst oder geschrumpft, Abmessungen und Qualitätsanforderungen

Dieses Dokument legt die Anforderungen an die Konstruktion und Abmessungen der Bremsscheibe fest.
Dieses Dokument gilt für Bremsscheiben, die auf dem Schienenfahrzeugradsatz oder auf einer Antriebswelle durch einen zylindrischen oder konischen Presssitz aufgepresst oder geschrumpft sind.
Dieses Dokument gilt für Bremsscheiben, die einen oder mehrere Bremsringe mit je zwei axial getrennten Reibflächen aufweisen.

Applications ferroviaires - Disques de frein pour matériel roulant ferroviaire - Partie 1 : Disques de frein calés ou frettés sur essieu ou sur arbre moteur, dimensions et exigences de qualité

Le présent document spécifie les exigences à respecter pour la conception et les dimensions de disques de frein.
Le présent document est applicable aux disques de frein calés ou frettés sur essieu ou sur arbre moteur de matériel roulant ferroviaire par emmanchement conique ou cylindrique.
Le présent document s'applique aux disques ayant une ou plusieurs couronnes, chaque couronne ayant deux surfaces de friction séparées axialement.

Železniške naprave - Kolutne zavore za železniška vozila - 1. del: Kolutne zavore (diski), nameščene na osi s hladnim ali vročim postopkom, mere in zahteve za kakovost

Ta osnutek evropskega standarda določa zahteve za načrtovanje in mere kolutnih zavor (diskov).
Ta osnutek evropskega standarda se uporablja za kolutne zavore, nameščene na os ali pogonsko gred železniškega vozila z valjasto ali stožčasto nadmero.
Za vsako posamezno tako opremljeno enoto se lahko uvede eden ali več obročev za kolutne zavore, pri čemer ima vsak dve osno ločeni čelni torni ploskvi.

General Information

Status
Published
Publication Date
05-Mar-2019
Withdrawal Date
29-Sep-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Mar-2019
Due Date
03-Apr-2019
Completion Date
06-Mar-2019

Relations

Buy Standard

Standard
EN 14535-1:2019
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 14535-1:2016
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14535-1:2019
01-maj-2019
1DGRPHãþD
SIST EN 14535-1:2006+A1:2011
äHOH]QLãNHQDSUDYH.ROXWQH]DYRUH]DåHOH]QLãNDYR]LODGHO.ROXWQH]DYRUH
GLVNL QDPHãþHQHQDRVLVKODGQLPDOLYURþLPSRVWRSNRPPHUHLQ]DKWHYH]D
NDNRYRVW
Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed
or shrunk onto the axle or drive shaft, dimensions and quality requirements
Bahnanwendungen - Bremsscheiben für Schienenfahrzeuge - Teil 1:
Wellenbremsscheiben, aufgepresst oder geschrumpft, Abmessungen und
Qualitätsanforderungen
Applications ferroviaires - Disques de frein pour matériel roulant ferroviaire - Partie 1 :
Disques de frein calés ou frettés sur essieu ou sur arbre moteur, dimensions et
exigences de qualité
Ta slovenski standard je istoveten z: EN 14535-1:2019
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 14535-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14535-1:2019

---------------------- Page: 2 ----------------------

SIST EN 14535-1:2019


EN 14535-1
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 45.060.01 Supersedes EN 14535-1:2005+A1:2011
English Version

Railway applications - Brake discs for railway rolling stock
- Part 1: Brake discs pressed or shrunk onto the axle or
drive shaft, dimensions and quality requirements
Applications ferroviaires - Disques de frein pour Bahnanwendungen - Bremsscheiben für
matériel roulant ferroviaire - Partie 1 : Partie 1 : Schienenfahrzeuge - Teil 1: Wellenbremsscheiben,
Disques de frein calés ou frettés sur essieu ou sur arbre aufgepresst oder geschrumpft, Abmessungen und
moteur, dimensions et exigences de qualité Qualitätsanforderungen
This European Standard was approved by CEN on 14 October 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14535-1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14535-1:2019
EN 14535-1:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 7
5 Requirements . 7
5.1 General . 7
5.2 Materials, design and manufacture .
...

SLOVENSKI STANDARD
oSIST prEN 14535-1:2016
01-december-2016
äHOH]QLãNHQDSUDYH.ROXWQH]DYRUH]DåHOH]QLãNDYR]LODGHO.ROXWQH]DYRUH
GLVNL QDPHãþHQHQDRVLVKODGQLPDOLYURþLPSRVWRSNRPPHUHLQ]DKWHYH]D
NDNRYRVW
Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed
or shrunk onto the axle or drive shaft, dimensions and quality requirements
Bahnanwendungen - Bremsscheiben für Schienenfahrzeuge - Teil 1:
Wellenbremsscheiben, aufgepresst oder geschrumpft, Abmessungen und
Qualitätsanforderungen
Applications ferroviaires - Disques de frein pour matériel roulant ferroviaire - Partie 1 :
Disques de frein calés ou frettés sur essieu ou sur arbre moteur, dimensions et
exigences de qualité
Ta slovenski standard je istoveten z: prEN 14535-1
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
oSIST prEN 14535-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14535-1:2016

---------------------- Page: 2 ----------------------
oSIST prEN 14535-1:2016


DRAFT
EUROPEAN STANDARD
prEN 14535-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2016
ICS 45.040 Will supersede EN 14535-1:2005+A1:2011
English Version

Railway applications - Brake discs for railway rolling stock
- Part 1: Brake discs pressed or shrunk onto the axle or
drive shaft, dimensions and quality requirements
Applications ferroviaires - Disques de frein pour Bahnanwendungen - Bremsscheiben für
matériel roulant ferroviaire - Partie 1 : Disques de frein Schienenfahrzeuge - Teil 1: Bremsscheiben, die auf
calés ou frettés sur essieu ou sur arbre moteur, einen Radsatz oder eine Antriebswelle gepresst oder
dimensions et exigences de qualité geschrumpft werden, Abmessungen und
Qualitätsanforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14535-1:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14535-1:2016
prEN 14535-1:2016 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviations . 8
5 Requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.