EN ISO 13428:2005

Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005)

ISO 13428:2005 describes an index test for the determination of the protection efficiency of a geosynthetic on a hard surface, exposed to the impact load of a hemispherical object.
The index test measures the change in thickness of a thin lead plate lying between the geosynthetic and a rigid support.

Geokunststoffe - Bestimmung der Schutzwirksamkeit eines Geokunststoffes bei Stoßbelastung (ISO 13428:2005)

Diese Internationale Norm legt eine Kenngrößenprüfung zur Bestimmung der Schutzwirksamkeit eines Geokunststoffs auf einer harten Oberfläche bei Stoßbelastung durch einen halbkugelförmigen Gegenstand fest.
Die Kenngrößenprüfung misst die Dickenänderung einer dünnen Bleiplatte, die zwischen dem Geokunststoff und einer starren Auflage eingefügt ist.
Sie kann durch Verwendung der zu schützenden tatsächlichen Oberfläche und der tatsächlichen Aufeinanderfolge von Geokunststoffen als eine Leistungsprüfung angewendet werden.
Die Prüfung gilt für alle Geokunststoffe mit Öffnungen von weniger als 15 mm (maximale Größe).

Géosynthétiques - Détermination de l'efficacité de protection d'un géosynthétique contre l'effet d'un impact (ISO 13428:2005)

L'ISO 13428:2005 décrit un essai de caractérisation permettant de déterminer l'efficacité de la protection offerte par un produit géosynthétique sur une surface dure, soumis à l'impact d'un objet hémisphérique.
Cet essai de caractérisation mesure la variation d'épaisseur d'une mince plaque de plomb placée entre le géosynthétique et un support rigide.

Geosintetika - Ugotavljanje zaščitne učinkovitosti geosintetike proti poškodbam zaradi udarcev (ISO 13428:2005)

General Information

• Status: Published
• Publication Date: 14-Feb-2005
• ICS: 59.080.70 - Geotextiles
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189/WG 3 - Mechanical testing
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 01-Oct-2009
• Completion Date: 01-Oct-2009
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 13428:2005 - Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005)

Relations

• Revised: prEN ISO 13428 - Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO/DIS 13428:2023)
• Effective Date: 21-Sep-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13428:2005
01-maj-2005
*HRVLQWHWLND8JRWDYOMDQMH]DãþLWQHXþLQNRYLWRVWLJHRVLQWHWLNHSURWLSRãNRGEDP
]DUDGLXGDUFHY,62
Geosynthetics - Determination of the protection efficiency of a geosynthetic against
impact damage (ISO 13428:2005)
Geokunststoffe - Bestimmung der Schutzwirksamkeit eines Geokunststoffes bei
Stoßbelastung (ISO 13428:2005)
Géosynthétiques - Détermination de l'efficacité de protection d'un géosynthétique contre
l'effet d'un impact (ISO 13428:2005)
Ta slovenski standard je istoveten z: EN ISO 13428:2005
ICS:
59.080.70 Geotekstilije Geotextiles
SIST EN ISO 13428:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13428:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 13428:2005
EUROPEAN STANDARD
EN ISO 13428
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS 59.080.70
English version
Geosynthetics - Determination of the protection efficiency of a
geosynthetic against impact damage (ISO 13428:2005)
Géosynthétiques - Détermination de l'efficacité de Geokunststoffe - Bestimmung der Schutzwirksamkeit eines
protection d'un géosynthétique contre l'effet d'un impact Geokunststoffes bei Stoßbelastung (ISO 13428:2005)
(ISO 13428:2005)
This European Standard was approved by CEN on 3 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13428:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13428:2005
EN ISO 13428:2005 (E)




Foreword



This document (EN ISO 13428:2005) has been prepared by Technical Committee CEN/TC 189
"Geosynthetics", the secretariat of which is held by IBN, in collaboration with Technical Committee ISO/TC
221 "Geosynthetics".

This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2005, and conflicting national standards shall be withdrawn
at the latest by August 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13428:2005

INTERNATIONAL ISO
STANDARD 13428
First edition
2005-02-15

Geosynthetics — Determination of the
protection efficiency of a geosynthetic
against impact damage
Géosynthétiques — Détermination de l'efficacité de protection d'un
géosynthétique contre l'effet d'un impact




Reference number
ISO 13428:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 13428:2005
ISO 13428:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the fil
...