EN 13395-2:2002

Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar

This European Standard specifies a method for determining the workability (or consistence) of flowing-grade hydraulic cement mortars CC, polymer modified hydraulic cement mortars PCC and polymer bound mortars PC for the protection and repair of concrete, as defined in EN 1504-1.
The method is suitable for high flow grouts or mortars that have a maximum aggregate size of 4 mm.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Verarbeitbarkeit - Teil 2: Prüfung des Fließverhaltens von Vergussmörtel, Feinmörtel oder Mörtel

Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Verarbeitbarkeit von HC-, PCC- und PC-Produkten und Systemen für die Instandsetzung und den Schutz von Beton nach EN 1504-3. Für thixotrope Mörtel gilt das in EN 104-845-1 angegebene Verfahren. Für Beton mit hoher Verarbeitbarkeit gilt das in EN 104-845-3 angegebene Verfahren.

Produits et systèmes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination de l'ouvrabilité - Partie 2: Essai d'écoulement des coulis ou mortiers

La présente Norme européenne spécifie une méthode permettant de déterminer l'ouvrabilité (ou la consistance) des mortiers appliqués à la truelle, à base de ciment hydraulique CC, de ciment hydraulique modifié polymère PCC et de liants polymères PC, et destinés à la protection et la réparation du béton, tels que définis dans l'EN 1504-1.
La méthode est adaptée aux coulis et mortiers à haute fluidité dont la classe de granulat maximale est de 4 mm.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode - Določevanje obdelavnosti - 2. del: Preskus tečenja zalivne mase ali malte

General Information

• Status: Published
• Publication Date: 21-May-2002
• ICS: 91.080.40 - Concrete structures
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 8/WG 2 - Repair
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 18-Jun-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13395-2:2002 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2002
3URL]YRGLLQVLVWHPL]D]DãþLWRLQSRSUDYLOREHWRQVNLKNRQVWUXNFLM3UHVNXVQH
PHWRGH'RORþHYDQMHREGHODYQRVWLGHO3UHVNXVWHþHQMD]DOLYQHPDVHDOLPDOWH
Products and systems for the protection and repair of concrete structures - Test methods
- Determination of workability - Part 2: Test for flow of grout or mortar
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken -
Prüfverfahren - Bestimmung der Verarbeitbarkeit - Teil 2: Prüfung des Fließverhaltens
von Vergussmörtel, Feinmörtel oder Mörtel
Produits et systemes de protection et de réparation des structures en béton - Méthodes
d'essai - Détermination de l'ouvrabilité - Partie 2: Essai d'écoulement des coulis ou
mortiers
Ta slovenski standard je istoveten z: EN 13395-2:2002
ICS:
91.080.40 Betonske konstrukcije Concrete structures
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 13395-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2002
ICS 91.080.40; 91.100.10
English version
Products and systems for the protection and repair of concrete
structures - Test methods - Determination of workability - Part 2:
Test for flow of grout or mortar
Produits et systèmes de protection et de réparation des Produkte und Systeme für den Schutz und die
structures en béton - Méthodes d'essai - Détermination de Instandsetzung von Betontragwerken - Prüfverfahren -
l'ouvrabilité - Partie 2: Essai d'écoulement des coulis ou Bestimmung der Verarbeitbarkeit - Teil 2: Prüfung des
mortiers Fließverhaltens von Vergussmörtel, Feinmörtel oder Mörtel
This European Standard was approved by CEN on 4 January 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13395-2:2002 E
worldwide for CEN national Members.

Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.4
5 Equipment.4
6 Preparation .5
7 Test Procedure.5
8 Test report .5
Bibliography .7
Foreword
This document EN 13395-2:2002 has been prepared by Technical Committee CEN/TC 104 "Concrete and related
products", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latest
by December 2002.
This European Standard is one of a series dealing with products and systems for the protection and repair of
concrete structures. It describes a method for determining the flow characteristics of repair grouts and mortars.
It is one of a series of inter-related parts dealing with the workability of repair grouts, mortars and concretes. The
other parts are:
prEN 13395-1, Products and systems for the protection and repair of concrete structures - Test methods -
Determination of workability - Part 1: Test for flow of thixotropic mortars.

EN 13395-3, Products and systems for the protection and repair of concrete structures - Test methods -
Determination of workability - Part 3: Test for flow of repair concrete.
EN 13395-4, Products and systems for the protection and repair of concrete structures - Test methods -
Determination of workability - Part 4: Application of repair mortar overhead.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
count
...