iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 13856

(Main)

LPG equipment and accessories - Minimum requirements for the content of the user manual for automotive LPG systems

LPG equipment and accessories - Minimum requirements for the content of the user manual for automotive LPG systems

This document specifies the minimum requirements for the contents of the user manual for Automotive LPG propulsion systems fitted in road vehicles.
This document does not cover the user manual for forklift trucks or other industrial machinery.

Flüssiggas-Geräte und Ausrüstungsteile - Mindestanforderungen an den Inhalt von Betriebsanleitungen für Autogasanlagen

Dieses Dokument legt die Mindestanforderungen an den Inhalt der Betriebsanleitung für Autogasanlagen fest, die in Straßenfahrzeugen verbaut sind.
Dieses Dokument behandelt nicht die Betriebsanleitung für Gabelstapler oder andere Industriemaschinen.

Équipements pour GPL et leurs accessoires - Exigences d’utilisation pour les systèmes GPL pour automobiles

Le présent document spécifie les exigences minimales que doit contenir le manuel utilisateur des systèmes GPL pour automobiles.
Le présent document ne couvre pas le manuel utilisateur pour les chariots élévateurs ou autres engins industriels.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Minimalne zahteve za vsebino navodila za uporabo UNP v sistemih za pogon motornih vozil

General Information

Status
Not Published
Publication Date
24-Mar-2026
ICS
43.060.40 - Fuel systems
75.160.30 - Gaseous fuels
Technical Committee
CEN/TC 286 - Liquefied petroleum gas equipment and accessories
Drafting Committee
CEN/TC 286/WG 6 - Automative LPG system
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
21-Nov-2024
Due Date
06-Nov-2024
Completion Date
21-Nov-2024
Ref Project
oSIST prEN 13856:2024 - LPG equipment and accessories - Minimum requirements for the content of the user manual for automotive LPG systems

Relations

Revises
EN 13856:2002 - Minimum requirements for the content of the user manual for automotive LPG systems
Effective Date
07-Feb-2024

Buy Standard

prEN 13856:2024prEN 13856:2024
PreviousNext
Draft
prEN 13856:2024
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2024
Oprema in pribor za utekočinjeni naftni plin (UNP) - Minimalne zahteve za vsebino
navodila za uporabo UNP v sistemih za pogon motornih vozil
LPG equipment and accessories - Minimum requirements for the content of the user
manual for automotive LPG systems
Anforderungen an den Inhalt von Betriebsanleitungen für Autogasanlagen
Contraintes d'utilisation pour les systèmes GPL pour automobiles
Ta slovenski standard je istoveten z: prEN 13856
ICS:
43.060.40 Sistemi za gorivo Fuel systems
75.160.30 Plinska goriva Gaseous fuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2024
ICS 43.060.40; 75.160.30 Will supersede EN 13856:2002
English Version
LPG equipment and accessories - Minimum requirements
for the content of the user manual for automotive LPG
systems
Contraintes d'utilisation pour les systèmes GPL pour Anforderungen an den Inhalt von Betriebsanleitungen
automobiles für Autogasanlagen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 286.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13856:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General. 5
5 Contents of the user manual . 5
5.1 Technical specifications . 5
5.2 Safety instructions . 6
5.3 Operation of the LPG system . 6
5.3.1 Filling of the LPG container . 6
5.3.2 Switch-over procedure . 6
5.3.3 Opening / closing of manual valves when fitted . 6
5.3.4 Level indicator . 6
5.4 Maintenance . 6
5.5 Defects and repair . 6
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13856:2002(Main)
Minimum requirements for the content of the user manual for automotive LPG systems
SIST EN 13856:2002

This European Standard specifies the minimum requirements for the contents of the user manual for Automotive LPG propulsion systems fitted in road vehicles.
This standard does not cover the user manual for forklift trucks or other industrial machinery.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13856:2002(Main)
Minimum requirements for the content of the user manual for automotive LPG systems
SIST EN 13856:2002

This European Standard specifies the minimum requirements for the contents of the user manual for Automotive LPG propulsion systems fitted in road vehicles.
This standard does not cover the user manual for forklift trucks or other industrial machinery.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 754-2:2024(Main)
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
kSIST FprEN 754-2:2024

This document specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy cold drawn rod/bar and tube.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 754-1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573-3.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10855-1:2024(Main)
Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2024)
kSIST FprEN ISO 10855-1:2024

This document specifies requirements for the design, manufacture and marking of offshore containers with a maximum gross mass not exceeding 25 000 kg, intended for repeated use to, from and between offshore installations and ships.
This document specifies only transport-related requirements.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17702-1:2024(Main)
Plant biostimulants - Sampling and sample preparation - Part 1: Sampling
kSIST FprEN 17702-1:2024

This document specifies sampling plans and methods of representative sampling of plant biostimulants to obtain samples for physical, chemical and biological analysis.
It is applicable to the sampling of batches of plant biostimulants supplied or ready for supply to third parties, as such, or in smaller batches.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products: Fertilizers/Liming Materials/Soil Improvers/Growing Media/Inhibitors/Plant Biostimulants, and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.
This document is intended to be used by manufacturers, buyers and competent authorities to obtain samples prior to transport and supply it to a laboratory for testing.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17717:2024(Main)
Plant biostimulants - Detection of Salmonella spp.
kSIST FprEN 17717:2024

This document specifies a method for the detection of Salmonella spp. in biostimulants.
This document is applicable to all microbial biostimulants in agriculture.
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants, and where the following category Plant Biostimulants is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14129:2024(Main)
LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
kSIST FprEN 14129:2024

This European Standard specifies the requirements for the design and testing of spring loaded pressure relief valves and thermal expansion valves for use in:
- static LPG pressure vessels,
NOTE   The pressure vessels can be situated above ground, underground or mounded.
- transportable LPG welded steel pressure drums,
- LPG pressure vessels on road tankers, rail tankers, tank-containers or demountable tanks.
This document does not address relief valves for LPG cylinders, which are identified in EN 13953.
This document does not address production testing.
Normative Annex B prescribes testing with conditioning at - 40 °C for valves for use under extreme low temperature conditions.
The requirements for pressure relief valve accessories such as isolating devices, changeover manifolds and vent pipes are specified in EN 14071.
EN 14570 identifies the requirements for the pressure relief valve capacities for static pressure vessels.
EN 12252 identifies the requirements for the pressure relief valve capacities for road tankers.
Valves designed in accordance with this standard are specifically for use in LPG applications. Valves manufactured in accordance with EN ISO 4126 1 may also be used in certain LPG applications.
Terms used with LPG pressure relief valves are described graphically in Annex A.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17718:2024(Main)
Plant biostimulants - Determination of Rhizobium spp.
kSIST FprEN 17718:2024

This document provides the methodology for the enumeration and determination of Rhizobiaceae (Rhizobium spp., Mesorhizobium spp., Ensifer spp., Bradyrhizobium spp.).
This document is applicable to the blends of fertilizing products where a blend is a mix of at least two of the following component EU fertilising products categories: Fertilizers, Liming Materials, Soil Improvers, Growing Media, Plant Biostimulants and where the following category Plant Biostimulants is the highest percentage in the blend by mass or volume, or in the case of liquid form by dry mass. If Plant Biostimulants is not the highest percentage in the blend, the European Standard for the highest percentage of the blend applies. In case a blend of fertilizing products is composed of components in equal quantity or in case the component EU fertilising products used for the blend have identical formulations , the user decides which standard to apply.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17988-4:2024(Main)
Circular design of fishing gear and aquaculture equipment - Part 4: Environmental and circularity requirements and guidelines
kSIST FprEN 17988-4:2024

This document specifies the environmental and circularity requirements for
the components of fishing gear and aquaculture equipment containing
plastics. It establishes sustainability principles that minimize the negative
impact of the plastic components of fishing gear and aquaculture equipment
on the environment, taking into account the impact on its performance (e.g.
catchability or life span). The circular and environmental design of fishing gear
and aquaculture equipment focuses on:
— The selection and sourcing of materials and components;
— manufacture and assembly;
— placement, installation and deployment of the fishing gear and aquaculture
equipment;
— use and maintenance repair; and
— the end-of-use stage.
Transport, storage and distribution are taken into account at the different
stages, where applicable.
This document excludes design aspects related to fishing or aquaculture
techniques or management.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7197:2024(Main)
Neurosurgical implants - Sterile, single-use hydrocephalus shunts (ISO 7197:2024)
kSIST FprEN ISO 7197:2024

This document specifies the performance requirements for sterile, single-use non-active hydrocephalus shunts. This includes not only the valve, but also additional components such as tubes and reservoirs.
This document does not provide any recommendations on which type of valve is most suitable for any specific context of use.
This document specifies the mechanical and technical requirements to manufacture shunts and the technical information of the valve to be supplied by the manufacturer.
This document does not apply to active implants for the treatment of hydrocephalus.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day