EN ISO 14917:2017
(Main)Thermal spraying - Terminology, classification (ISO 14917:2017)
Thermal spraying - Terminology, classification (ISO 14917:2017)
ISO 14917:2017 defines processes and general terms for thermal spraying. It classifies thermal spraying processes according to type of spray material, to type of operation and to type of energy carrier. It specifies abbreviations for spray processes, sprayed coatings, and manufacturing steps.
Thermisches Spritzen - Begriffe, Einteilung (ISO 14917:2017)
Projection thermique - Terminologie, classification (ISO 14917:2017)
ISO 14917:2017 définit les procédés et les termes généraux relatifs à la projection thermique. Il classe les procédés de projection thermique en fonction du type de matériau d'apport, du mode de projection et du type de source d'énergie. Il spécifie les abréviations associées aux procédés de projection, aux revêtements obtenus par projection et aux étapes de fabrication.
Vroče brizganje - Terminologija, razvrstitev (ISO 14917:2017)
Ta standard določa procese in splošne izraze za vroče brizganje. Razvršča tudi procese vročega brizganja glede na vrsto materiala za brizganje, vrsto delovanja, vrsto energetskega nosilca.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 14917:2017
01-junij-2017
1DGRPHãþD
SIST EN 657:2005
9URþHEUL]JDQMH7HUPLQRORJLMDUD]YUVWLWHY ,62
Thermal spraying - Terminology, classification (ISO 14917:2017)
Thermisches Spritzen - Begriffe, Einteilung (ISO 14917:2017)
Projection thermique - Terminologie, classification (ISO 14917:2017)
Ta slovenski standard je istoveten z: EN ISO 14917:2017
ICS:
01.040.25 Izdelavna tehnika (Slovarji) Manufacturing engineering
(Vocabularies)
25.220.20 Površinska obdelava Surface treatment
SIST EN ISO 14917:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14917:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 14917:2017
EN ISO 14917
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2017
EUROPÄISCHE NORM
ICS 01.040.25; 25.220.20 Supersedes EN 657:2005
English Version
Thermal spraying - Terminology, classification (ISO
14917:2017)
Projection thermique - Terminologie, classification Thermisches Spritzen - Begriffe, Einteilung (ISO
(ISO 14917:2017) 14917:2017)
This European Standard was approved by CEN on 8 March 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14917:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14917:2017
EN ISO 14917:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 14917:2017
EN ISO 14917:2017 (E)
European foreword
This document (EN ISO 14917:2017) has been prepared by Technical Committee ISO/TC 107 "Metallic
and other inorganic coatings" in collaboration with Technical Committee CEN/TC 240 “Thermal
spraying and thermally sprayed coatings” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2017, and conflicting national standards
shall be withdrawn at the latest by September 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 657:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14917:2017 has been approved by CEN as EN ISO 14917:2017 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 14917:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 14917:2017
INTERNATIONAL ISO
STANDARD 14917
Second edition
2017-03
Thermal spraying — Terminology,
classification
Projection thermique — Terminologie, classification
Reference number
ISO 14917:2017(E)
©
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 14917:2017
ISO 14917:201
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.