Expression of performance of gas analyzers - Part 6:Photometric analyzers

IEC 61207-6:2014 applies to all aspects of analyzers using photometric techniques for the measurement of concentration of one or more components in a mixture of gases or vapors. It should be used in conjunction with IEC 61207-1. It specifies: - the terminology and definitions related to the functional performance of gas analyzers, utilizing a photometric analyzer, for the continuous measurement of gas or vapor concentration in a source gas; - it unifies methods used in making and verifying statements on the functional performance of such analyzers; - it specifies what tests should be performed to determine the functional performance and how such tests should be carried out and it provides basic documents to support the application of standards of quality assurance ISO 9001. This second edition cancels and replaces the first edition published in 1994 and constitutes a technical revision. The major changes are: - All references (normative and informative) have been updated, deleted or added to as appropriate. - All the terms and definitions relating to the document have been updated where appropriate. - New definitions have been added for generic photometric equipment and measurements. - All references to "errors" have been replaced by "uncertainties" and appropriate updated definitions applied. - Figures A.1, A.2.

Angabe zum Betriebsverhalten von Gasanalysatoren - Teil 6: Fotometrische Analysatoren

Expression des performances des analyseurs de gaz - Partie 6: Analyseurs photométriques

L'IEC 61207-6:2014 s'applique à tous les aspects des analyseurs utilisant les techniques photométriques pour mesurer la concentration d'un ou de plusieurs composants dans un mélange de gaz ou de vapeurs. Il convient de l'utiliser avec l'IEC 61207-1. Elle spécifie: - la terminologie et les définitions relatives aux performances fonctionnelles des analyseurs de gaz utilisant un analyseur photométrique, pour la mesure en continu de la concentration de gaz ou de vapeur dans un gaz source; - elle unifie les méthodes utilisées en fournissant et en vérifiant les indications relatives aux performances fonctionnelles de ces analyseurs; - elle spécifie les essais qu'il convient d'effectuer pour déterminer les performances fonctionnelles et la manière dont il convient d'effectuer ces essais et elle stipule les documents de base pour étayer l'usage des normes d'assurance de la qualité ISO 9001. Cette deuxième édition annule et remplace la première édition parue en 1994 et constitue une révision technique. Les modifications sont: - Toutes les références (normatives et informatives) ont été mises à jour, retirées ou ajoutées comme il convient. - Tous les termes et définitions en rapport avec le document ont été mis à jour le cas échéant. - De nouvelles définitions ont été ajoutées pour les équipements et mesures photométriques génériques. - Toutes les références aux "erreurs" ont été remplacées par le terme "incertitudes" et les définitions ont été mises à jour comme il convient. - Les Figures A.1 et A.2 ont été mises à jour.

Prikaz lastnosti analizatorjev plina - 6. del: Fotometrični analizatorji (IEC 61207-6:2014)

General Information

Status
Published
Publication Date
15-Jan-2015
Withdrawal Date
29-Dec-2017
Current Stage
6060 - Document made available - Publishing
Start Date
16-Jan-2015
Completion Date
16-Jan-2015

Relations

Buy Standard

Standard
EN 61207-6:2015
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Angabe zum Betriebsverhalten von Gasanalysatoren - Teil 6: Fotometrische Analysatoren (IEC 61207-6:2014)Expression des performances des analyseurs de gaz - Partie 6: Analyseurs photométriques (IEC 61207-6:2014)Expression of Performance of gas analyzers- Part 6: Photometric analyzers (IEC 61207-6:2014)71.040.40Kemijska analizaChemical analysis19.080SUHVNXãDQMHElectrical and electronic testingICS:Ta slovenski standard je istoveten z:EN 61207-6:2015SIST EN 61207-6:2015en01-junij-2015SIST EN 61207-6:2015SLOVENSKI
STANDARD



SIST EN 61207-6:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 61207-6
January 2015 ICS 19.080; 71.040.40
Supersedes
EN 61207-6:1994
English Version
Expression of performance of gas analyzers -
Part 6:Photometric analyzers (IEC 61207-6:2014)
Expression des performances des analyseurs de gaz - Partie 6: Analyseurs photométriques (IEC 61207-6:2014)
Angabe zum Betriebsverhalten von Gasanalysatoren -
Teil 6: Fotometrische Analysatoren (IEC 61207-6:2014) This European Standard was approved by CENELEC on 2014-12-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61207-6:2015 E SIST EN 61207-6:2015



EN 61207-6:2015 - 2 - Foreword The text of document 65B/947/FDIS, future edition 2 of IEC 61207-6, prepared by SC 65B "Measurement and control devices", of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61207-6:2015. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-09-30 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-12-30
This document supersedes EN 61207-6:1994. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61207-6:2014 was approved by CENELEC as a European Standard without any modification. SIST EN 61207-6:2015



- 3 - EN 61207-6:2015 Annex ZA (normative)
Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60079-29-1
-
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases EN 60079-29-1 -
IEC 60079-29-4
-
Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases EN 60079-29-4 -
IEC 60654 series
Operating conditions for industrial-process measurement and control equipment EN 60654 series
IEC 61207-1 -
Expression of performance of gas analyzers - Part 1: General EN 61207-1 -
IEC 61207-7 -
Expression of performance of gas analyzers - Part 7: Tuneab
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.