Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines

IEC 60335-2-82:2017(E) deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are: amusement machines; tables; bowling machines; dartboards; driving simulators; gaming machines; kiddie rides; laser shooting appliances; pinball machines; video games; personal service machines; card re-value machines; currency dispensers; luggage lockers; weighing machines; shoe shining appliances. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons. For appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; This standard does not apply to appliances intended exclusively for household use; appliances intended exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); appliances for washing cars; dispensing appliances and vending machines (IEC 60335-2-75); appliances within the scope of IEC 60065, such as jukeboxes and household video games; appliances within the scope of IEC 60950-1, such as copying machines, ticket machines and automatic teller machines; appliances intended to be used when a trained attendant is present, such as virtual reality systems; equipment intended exclusively for fairgrounds, such as carousels; self-balancing personal transport devices. This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2008) and its Amendment 2 (2015). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - It is clarified that 22.44 is not applicable to amusement machines; - Modified some Notes to make them normative text (5.6, 11.2, 11.8, 15.2.101, 15.2.102, 15.2.104, 15.3, 19.4, 19.101, 24.101, 24.102) and - Reference to 22.106 is made in Annex R. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2-82 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of IEC 60335-1:2010, its Amendment 1:2013 and its Amendment 2:2016. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Key words: Amusement Machines, Personal Service Machines, Safety

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-82: Besondere Anforderungen für Dienstleistungs- und Unterhaltungsautomaten

Appareils électrodomestiques et analogues - Sécurité - Partie 2-82: Règles particulières pour les machines de service et les machines de divertissement

L'IEC 60335-2-82:2017 traite de la sécurité des machines de divertissement électriques et des machines électriques de service pour les personnes, à usage commercial, dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. Il est possible de citer, à titre d’exemple d'appareils compris dans le domaine d'application de la présente norme, les machines de divertissement: - tables; - jeux de quilles; - fléchettes; - simulateurs de conduite; - machines de jeu; - animaux ou véhicules animés pour enfants («kiddie rides»); - jeux à laser; - billards électriques; - jeux vidéo; - machines de service pour les personnes; - machines à recharger les cartes; - distributeurs de monnaie; - consignes à bagages; - balances; - appareils à cirer les chaussures. Dans la mesure du possible, la présente norme traite des dangers ordinaires présentés par les appareils, encourus par les utilisateurs et les agents d’entretien. L’attention est attirée sur le fait que: - pour les appareils destinés à être utilisés dans des véhicules ou à bord de navires ou d'avions, des exigences supplémentaires peuvent être nécessaires; - dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs, et par des organismes similaires. La présente norme ne s’applique pas: - aux appareils prévus exclusivement pour des usages domestiques; - aux appareils prévus exclusivement pour des usages industriels; - aux appareils destinés à être utilisés dans des locaux présentant des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz); - aux appareils de lavage des voitures; - aux distributeurs avec ou sans moyen de paiement (IEC 60335-2-75); - aux appareils entrant dans le domaine d'application de l’IEC 60065, tels que juke-boxes et jeux vidéo à usage domestique; - aux appareils entrant dans le domaine d'application de l’IEC 60950, tels que les machines à photocopier, les distributeurs de tickets et les distributeurs de billets; - aux appareils destinés à être utilisés en présence d’un surveillant formé, tels que les systèmes de réalité virtuelle; - aux équipements destinés à être utilisés exclusivement dans des foires, tels que les manèges; - aux dispositifs de transport personnel autoéquilibrés. Cette troisième édition annule et remplace la deuxième édition parue en 2002, son Amendement 1 (2008) et son Amendement 2 (2015). Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - Il est précisé que le 22.44 n’est pas applicable aux machines de divertissement; - Modification de certaines notes pour les transformer en texte normatif (5.6, 11.2, 11.8, 15.2.101, 15.2.102, 15.2.104, 15.3, 19.4, 19.101, 24.101, 24.102). - Une référence au 22.106 est faite à l’Annexe R. La présente partie 2 doit être utilisée conjointement avec la dernière édition de l’IEC 60335-1 et ses amendements. Elle a été établie sur la base de la cinquième édition (2010) de cette norme. La présente partie 2 complète ou modifie les articles correspond

Gospodinjski in podobni električni aparati - Varnost - 2-82. del: Posebne zahteve za naprave za razvedrilo in naprave za storitvene dejavnosti

To točko 1. dela nadomešča naslednje besedilo.
Ta mednarodni standard opisuje varnost električnih naprav za razvedrilo
in naprav za storitvene dejavnosti za komercialno uporabo, pri čemer njihova nazivna napetost ni večja od 250 V za enofazne aparate in 480 V za druge aparate.
OPOMBA 101: Primeri aparatov, ki spadajo na področje uporabe tega standarda:
– naprave za razvedrilo:
• mize;
• naprave za kegljanje;
• table za pikado;
• simulatorji vožnje;
• igralni avtomati;
• otroški vrtiljaki;
• aparati za streljanje z laserjem;
• fliper naprave;
• video igre;
• naprave za storitvene dejavnosti;
• naprave za polnjenje kartic;
• avtomati za izdajanje valut;
• omarice za prtljago;
• naprave za tehtanje;
• aparati za loščenje čevljev.
Ta standard v največji možni meri obravnava splošne nevarnosti, ki jih predstavljajo
aparati ter s katerimi se srečujejo uporabniki in vzdrževalno osebje.
OPOMBA 102: Opozoriti je treba, da:
– so za aparate, ki so namenjeni za uporabo v vozilih ali na krovu ladij ali letal, morda potrebne dodatne
zahteve;
– v številnih državah nacionalni organi, odgovorni za zdravje in
varstvo pri delu, ter drugi podobni organi določajo dodatne zahteve.
OPOMBA 103: Ta standard se ne uporablja za:
– aparate za izključno gospodinjsko uporabo;
– aparate za izključno industrijske namene;
– aparate, ki so namenjeni za uporabo na lokacijah, kjer veljajo posebne razmere, kot je prisotnost
korozivne ali eksplozivne atmosfere (prah, hlapi ali plin);
– aparate za pranje avtomobilov;
– aparate za prodajo hrane in pijače ter prodajne avtomate (IEC 60335-2-75);
– aparate, ki spadajo na področje uporabe standarda IEC 60065 (npr. glasbeni avtomati, video igre za domačo uporabo);
– aparate, ki spadajo na področje uporabe standarda IEC 60950-1 (npr. kopirni stroji, avtomati za prodajo vstopnic, bančni
avtomati);
– aparate, ki so namenjeni za uporabo ob prisotnosti usposobljenega upravljavca (npr. sistemi navidezne resničnosti);
– opremo, ki je namenjena uporabi izključno na sejmiščih (npr. vrtiljaki);
– naprave za prevoz oseb s samodejnim uravnavanjem.

General Information

Status
Published
Publication Date
24-Mar-2022
Drafting Committee
IEC/TC 61 - IEC_TC_61
Current Stage
6060 - Document made available - Publishing
Start Date
25-Mar-2022
Completion Date
25-Mar-2022

Relations

Effective Date
07-Jun-2022
Effective Date
29-Mar-2022
Effective Date
04-Oct-2016
Effective Date
18-Apr-2023
Effective Date
01-Apr-2025

Overview

EN IEC 60335-2-82:2022 - published by CLC/CENELEC - is Part 2-82 of the IEC 60335 series addressing safety requirements for electric commercial amusement machines and personal service machines. This third edition (technical revision) aligns with IEC 60335-2-82:2017 and is to be used together with the latest edition of IEC 60335-1. The standard covers appliances with rated voltages up to 250 V for single-phase and 480 V for other appliances and lists typical equipment in scope (e.g., gaming machines, kiddie rides, pinball machines, video games, currency dispensers, weighing machines, shoe shining appliances).

The document clarifies applicability (for users and maintenance persons), provides test requirements, and supersedes previous editions (2003 + amendments). It also notes specific editorial/technical changes (for example, clarification that clause 22.44 is not applicable to amusement machines and several notes made normative).

Key Topics and Requirements

The standard supplements and modifies IEC 60335-1 and includes particular requirements such as:

  • Scope and classification for amusement and personal service machines
  • Marking and instructions required for safe use and maintenance
  • Protection against access to live parts and electrical safety (leakage current, electric strength)
  • Heating, moisture resistance and transient overvoltages
  • Overload protection, endurance and abnormal operation tests
  • Stability, mechanical hazards and mechanical strength
  • Construction, internal wiring and components (clearances, creepage, insulation)
  • Resistance to heat, fire and rusting; radiation and toxicity hazards
  • Normative annexes and references to environmental and test standards (e.g., IEC 60068 series)

These topic areas appear as explicit clauses and test requirements in the Part 2-82 text, directing manufacturers and test labs on practical safety verification.

Applications and Practical Use

EN IEC 60335-2-82 is applied when designing, testing, certifying or maintaining:

  • Commercial amusement machines (arcades, simulators, laser shooting, kiddie rides)
  • Personal service machines (shoe shiners, luggage lockers, currency dispensers, weighing machines)
  • Public-access machines installed in commercial premises (malls, arcades, leisure centres)

Practical uses:

  • Product design and risk assessment to ensure compliance with electrical, mechanical and fire safety
  • Type testing and conformity assessment by accredited laboratories
  • Preparation of technical files and user/maintenance instructions for CE marking and market access in Europe

Who Should Use This Standard

  • Manufacturers and OEMs of amusement and personal service machines
  • Test laboratories and certification bodies
  • Product safety and compliance engineers
  • Regulatory authorities, procurement teams and facility managers

Related Standards

  • IEC 60335-1 (general requirements) - to be used in conjunction with Part 2-82
  • IEC 60335-2-75 (vending/dispensing machines) - excluded where applicable
  • Environmental and safety test standards referenced in the normative annexes (e.g., IEC 60068 series)

Keywords: EN IEC 60335-2-82, Amusement Machines, Personal Service Machines, Safety, IEC 60335-1, testing, conformity, CENELEC.

Standard

EN IEC 60335-2-82:2022

English language
23 pages
Preview
Preview
e-Library read for
1 day

Frequently Asked Questions

EN IEC 60335-2-82:2022 is a standard published by CLC. Its full title is "Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines". This standard covers: IEC 60335-2-82:2017(E) deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are: amusement machines; tables; bowling machines; dartboards; driving simulators; gaming machines; kiddie rides; laser shooting appliances; pinball machines; video games; personal service machines; card re-value machines; currency dispensers; luggage lockers; weighing machines; shoe shining appliances. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons. For appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; This standard does not apply to appliances intended exclusively for household use; appliances intended exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); appliances for washing cars; dispensing appliances and vending machines (IEC 60335-2-75); appliances within the scope of IEC 60065, such as jukeboxes and household video games; appliances within the scope of IEC 60950-1, such as copying machines, ticket machines and automatic teller machines; appliances intended to be used when a trained attendant is present, such as virtual reality systems; equipment intended exclusively for fairgrounds, such as carousels; self-balancing personal transport devices. This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2008) and its Amendment 2 (2015). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - It is clarified that 22.44 is not applicable to amusement machines; - Modified some Notes to make them normative text (5.6, 11.2, 11.8, 15.2.101, 15.2.102, 15.2.104, 15.3, 19.4, 19.101, 24.101, 24.102) and - Reference to 22.106 is made in Annex R. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2-82 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of IEC 60335-1:2010, its Amendment 1:2013 and its Amendment 2:2016. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Key words: Amusement Machines, Personal Service Machines, Safety

IEC 60335-2-82:2017(E) deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are: amusement machines; tables; bowling machines; dartboards; driving simulators; gaming machines; kiddie rides; laser shooting appliances; pinball machines; video games; personal service machines; card re-value machines; currency dispensers; luggage lockers; weighing machines; shoe shining appliances. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons. For appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; This standard does not apply to appliances intended exclusively for household use; appliances intended exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); appliances for washing cars; dispensing appliances and vending machines (IEC 60335-2-75); appliances within the scope of IEC 60065, such as jukeboxes and household video games; appliances within the scope of IEC 60950-1, such as copying machines, ticket machines and automatic teller machines; appliances intended to be used when a trained attendant is present, such as virtual reality systems; equipment intended exclusively for fairgrounds, such as carousels; self-balancing personal transport devices. This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2008) and its Amendment 2 (2015). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - It is clarified that 22.44 is not applicable to amusement machines; - Modified some Notes to make them normative text (5.6, 11.2, 11.8, 15.2.101, 15.2.102, 15.2.104, 15.3, 19.4, 19.101, 24.101, 24.102) and - Reference to 22.106 is made in Annex R. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2-82 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of IEC 60335-1:2010, its Amendment 1:2013 and its Amendment 2:2016. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Key words: Amusement Machines, Personal Service Machines, Safety

EN IEC 60335-2-82:2022 is classified under the following ICS (International Classification for Standards) categories: 97.180 - Miscellaneous domestic and commercial equipment; 97.200.40 - Playgrounds. The ICS classification helps identify the subject area and facilitates finding related standards.

EN IEC 60335-2-82:2022 has the following relationships with other standards: It is inter standard links to EN 60335-2-82:2003/A1:2008, EN 60335-2-82:2003/A2:2020, EN 60335-2-82:2003, EN IEC 60335-2-82:2022/A1:2025, prEN IEC 60335-2-82:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN IEC 60335-2-82:2022 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU, 2014/53/EU; Standardization Mandates: M/511, M/536. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase EN IEC 60335-2-82:2022 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2022
Nadomešča:
SIST EN 60335-2-82:2003
SIST EN 60335-2-82:2003/A1:2008
SIST EN 60335-2-82:2003/A2:2020
Gospodinjski in podobni električni aparati - Varnost - 2-82. del: Posebne zahteve
za naprave za razvedrilo in naprave za storitvene dejavnosti
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements
for amusement machines and personal service machines
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-82:
Besondere Anforderungen für Dienstleistungs- und Unterhaltungsautomaten
Appareils électrodomestiques et analogues - Sécurité - Partie 2-82: Règles particulières
pour les machines de service et les machines de divertissement
Ta slovenski standard je istoveten z: EN IEC 60335-2-82:2022
ICS:
97.180 Razna oprema za dom in Miscellaneous domestic and
trgovino commercial equipment
97.200.99 Druga oprema za razvedrilo Other equipment for
entertainment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60335-2-82

NORME EUROPÉENNE
EUROPÄISCHE NORM March 2022
ICS 97.180; 97.200.40 Supersedes EN 60335-2-82:2003 and all of its
amendments and corrigenda (if any)
English Version
Household and similar electrical appliances - Safety - Part 2-82:
Particular requirements for amusement machines and personal
service machines
(IEC 60335-2-82:2017)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-82: Règles particulières pour les machines de ähnliche Zwecke - Teil 2-82: Besondere Anforderungen für
service et les machines de divertissement Dienstleistungs- und Unterhaltungsautomaten
(IEC 60335-2-82:2017) (IEC 60335-2-82:2017)
This European Standard was approved by CENELEC on 2017-11-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-82:2022 E

European foreword
The text of document (61/5293/CDV), future edition 3 of IEC 60335-2-82, prepared by IEC/TC 61
“Safety of household and similar electrical appliances” was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 60335-2-82:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–09–25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025–03–25
document have to be withdrawn
This document supersedes EN 60335-2-82:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60335-2-82:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60335-2-75 NOTE Harmonized as EN 60335-2-75

Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Annex ZC of EN 60335-1:2012 applies, except as follows:
Publication Year Title EN/HD Year

Addition
IEC 60068-2-52 1996 Environmental testing - Part 2-52: Tests - EN 60068-2-52 1996
Test Kb: Salt mist, cyclic (sodium chloride
solution)
IEC 62368-1 - Audio/video, information and EN IEC 62368-1 -
communication technology equipment -
Part 1: Safety requirements
IEC 60335-2-82 ®
Edition 3.0 2017-10
INTERNATIONAL
STANDARD
Household and similar electrical appliances – Safety –

Part 2-82: Particular requirements for amusement machines and personal

service machines
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 97.180, 97.200.40 ISBN 978-2-8322-4871-3

– 2 – IEC 60335-2-82:2017  IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 7
4 General requirement . 9
5 General conditions for the tests . 9
6 Classification . 9
7 Marking and instructions . 9
8 Protection against access to live parts . 11
9 Starting of motor-operated appliances . 11
10 Power input and current . 11
11 Heating . 11
12 Void . 11
13 Leakage current and electric strength at operating temperature . 11
14 Transient overvoltages . 11
15 Moisture resistance . 11
16 Leakage current and electric strength . 12
17 Overload protection of transformers and associated circuits . 12
18 Endurance . 12
19 Abnormal operation . 12
20 Stability and mechanical hazards . 14
21 Mechanical strength . 14
22 Construction . 14
23 Internal wiring . 15
24 Components . 16
25 Supply connection and external flexible cords . 17
26 Terminals for external conductors . 17
27 Provision for earthing . 17
28 Screws and connections . 17
29 Clearances, creepage distances and solid insulation . 17
30 Resistance to heat and fire . 18
31 Resistance to rusting . 18
32 Radiation, toxicity and similar hazards . 18
Annexes . 19
Bibliography . 20

IEC 60335-2-82:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-82: Particular requirements for amusement machines
and personal service machines
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60335-2-82 has been prepared by IEC technical committee 61:
Safety of household and similar electrical appliances.
This third edition cancels and replaces the second edition published in 2002 including its
Amendment 1 (2008) and its Amendment 2 (2015). This edition constitutes a technical
revision.
This edition includes the following significant technical changes with respect to the previous
edition:
– It is clarified that 22.44 is not applicable to amusement machines;
– Modified some Notes to make them normative text (5.6, 11.2, 11.8, 15.2.101, 15.2.102,
15.2.104, 15.3, 19.4, 19.101, 24.101, 24.102).
– Reference to 22.106 is made in Annex R.

– 4 – IEC 60335-2-82:2017  IEC 2017
The text of this International Standard is based on the following documents:
CDV Report on voting
61/5293/CDV 61/5379A/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60335 series, under the general title: Household and similar
electrical appliances – Safety, can be found on the IEC website.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments. It was established on the basis of the fifth edition (2010) of that standard.
NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to
convert that publication into the IEC standard: Safety requirements for amusement machines
and personal service machines.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies
as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,
the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or later than 36 months from the date of publication.

IEC 60335-2-82:2017 © IEC 2017 – 5 –
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in
normal use taking into account the manufacturer's instructions. It also covers abnormal
situations that can be expected in practice and takes into account the way in which
electromagnetic phenomena can affect the safe operation of appliances.
This standard takes into account the requirements of IEC 60364 as far as possible so that
there is compatibility with the wiring rules when the appliance is connected to the supply
mains. However, national wiring rules may differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
When a part 2 standard does not include additional requirements to cover hazards dealt with
in Part 1, Part 1 applies.
NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is
not necessary to specify particular requirements for the appliance in question over and above the general
requirements.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into
consideration when developing the general and particular requirements for the IEC 60335 series of standards. For
example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as
ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards.
An appliance that complies with the text of this standard will not necessarily be considered to
comply with the safety principles of the standard if, when examined and tested, it is found to
have other features that impair the level of safety covered by these requirements.
An appliance employing materials or having forms of construction differing from those detailed
in the requirements of this standard may be examined and tested according to the intent of
the requirements and, if found to be substantially equivalent, may be considered to comply
with the standard.
– 6 – IEC 60335-2-82:2017  IEC 2017
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-82: Particular requirements for amusement machines
and personal service machines
1 Scope
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric commercial amusement machines
and personal service machines, their rated voltage being not more than 250 V for single-
phase appliances and 480 V for other appliances.
NOTE 101 Examples of appliances that are within the scope of this standard are
– amusement machines:
• tables;
• bowling machines;
• dartboards;
• driving simulators;
• gaming machines;
• kiddie rides;
• laser shooting appliances;
• pinball machines;
• video games;
• personal service machines;
• card re-value machines;
• currency dispensers;
• luggage lockers;
• weighing machines;
• shoe shining appliances.
As far as is practicable, this standard deals with the common hazards presented by
appliances that are encountered by users and maintenance persons.
NOTE 102 Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be
necessary;
– in many countries, additional requirements are specified by the national authorities responsible for health, for
the protection of labour and similar authorities.
NOTE 103 This standard does not apply to
– appliances intended exclusively for household use;
– appliances intended exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a
corrosive or explosive atmosphere (dust, vapour or gas);
– appliances for washing cars;
– dispensing appliances and vending machines (IEC 60335-2-75);
– appliances within the scope of IEC 60065, such as jukeboxes and household video games;

IEC 60335-2-82:2017 © IEC 2017 – 7 –
– appliances within the scope of IEC 60950-1, such as copying machines, ticket machines and automatic teller
machines;
– appliances intended to be used when a trained attendant is present, such as virtual reality systems;
– equipment intended exclusively for fairgrounds, such as carousels;
– self-balancing personal transport devices.
2 Normative references
This clause of Part 1 is applicable except as follows.
Addition:
IEC 60068-2-52:1996, Environmental testing – Part 2: Tests – Test Kb: Salt mist, cyclic
(sodium, chloride solution)
IEC 62368-1, Audio/video, information and communication technology equipment – Part 1:
Safety requirements
3 Terms and definitions
This clause of Part 1 is applicable except as follows.
3.1.9 Replacement:
normal operation
operation of the appliance under the following conditions
The appliance is operated in the stand-by mode until steady conditions are established and
then under the most unfavourable conditions of normal use.
The appliance is refilled when necessary in accordance with the instructions for use, or the
instructions for maintenance, and the next operating period started as soon as possible.
Appliances that support persons in normal use are load
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

Die Norm EN IEC 60335-2-82:2022 behandelt die Sicherheit von elektrischen Freizeitmaschinen und persönlichen Dienstmaschinen und ist von großer Relevanz für Hersteller und Prüfinstitutionen in der Branche. Der Anwendungsbereich umfasst Maschinen mit einer Nennspannung von nicht mehr als 250 V für einphasige Geräte und 480 V für andere Geräte. Dies schließt eine breite Palette von Geräten ein, wie z.B. Amusement Machines, Bowlingmaschinen, Dartboards, Fahr-Simulatoren, sowie persönliche Dienstmaschinen, zu denen auch Kartenwertgeräte und Geldautomaten gehören. Ein wesentliches Merkmal der Norm ist die Fokussierung auf die gemeinsamen Gefahren, die Nutzer und Wartungspersonal bei diesen Geräten erfahren können. Dies stellt sicher, dass die Sicherheitsanforderungen den realen Nutzungsszenarien Rechnung tragen. Die spezifischen Anforderungen sind klar strukturiert und bieten einen umfassenden Leitfaden zur Gewährleistung der Sicherheit in der Entwicklung und dem Betrieb von Amusement Machines und Personal Service Machines. Die technische Überarbeitung dieser dritten Auflage bringt signifikante Änderungen mit sich, darunter Klarstellungen und Modifikationen, die die Norm relevanter und anwenderfreundlicher machen. Besonders hervorzuheben ist die Präzisierung, dass bestimmte Abschnitte der Norm nicht auf Freizeitmaschinen anwendbar sind, was die Relevanz und Anwendbarkeit der Norm in der Praxis erhöht. Die Norm enthält auch normative Texte, die die Anforderungen weiter konkretisieren und somit zu einer höheren Sicherheit beitragen. Darüber hinaus wird in der Veröffentlichung darauf hingewiesen, dass nach der Veröffentlichung einer neuen oder überarbeiteten IEC-Norm eine Übergangszeit erforderlich sein kann, was den Herstellern und Prüfinstitutionen ausreichend Zeit gibt, sich an die neuen Anforderungen anzupassen. Die Empfehlung des Ausschusses zur nationalen Umsetzung innerhalb eines Zeitrahmens von 12 bis 36 Monaten unterstreicht die Bedeutung dieser Norm für die Branche. Insgesamt stellt EN IEC 60335-2-82:2022 einen wichtigen Beitrag zur Sicherheit von Amusement Machines und Personal Service Machines dar und wird zweifellos dazu beitragen, die Sicherheitsstandards in der Branche weiter zu erhöhen.

EN IEC 60335-2-82:2022 표준은 가정용 및 유사 전기 기기의 안전성을 다루며, 특히 오락 기계와 개인 서비스 기계에 대한 특정 요구 사항을 규정하고 있습니다. 이 표준의 범위는 250V 이하의 단상 기기 및 480V 이하의 다른 기기를 포함하는 전기 상업 오락 기계 및 개인 서비스 기계의 안전성을 보장하는 데 초점을 맞추고 있습니다. 예를 들어, 오락 기계, 볼링 기계, 둔탁한 드론, 비디오 게임 기계 등 다양한 기기가 이 표준의 적용 대상입니다. 이 표준의 강점 중 하나는 사용자와 유지 보수 담당자가 직면할 수 있는 공통 위험에 대해 포괄적으로 다룬다는 점입니다. 이는 기계의 안전성을 높이는 데 기여하며, 안전한 사용 환경을 조성하는 것을 목표로 합니다. 또한, 이 표준은 ISO/IEC 지침에 따라 작성되어 국제적으로 인정받는 안전 기준을 제공함으로써, 제조업체 및 테스트 기관이 새로운 또는 수정된 테스트를 실시할 준비를 하도록 돕습니다. EN IEC 60335-2-82:2022 표준은 특히 오락 기계와 개인 서비스 기계에 대한 특정 요구 사항을 명확히 하며, 2002년에 발행된 이전 판을 기술적으로 수정하였습니다. 이 표준의 새로운 판에서는 오락 기계에 적용되지 않는 내용을 명확히 하고, 일부 주석을 규범적 텍스트로 수정하는 등의 중요한 기술적 변경 사항이 포함되어 있습니다. 이는 기계의 안전성과 신뢰성을 높이는 데 기여하고 있습니다. 끝으로, 이 표준은 최신 IEC 60335-1 버전 및 그 개정판과 함께 사용되며, 새로운 요구 사항에 맞춰 제품을 준비하는 데 필요한 전환 기간을 고려한 점에서 실용성을 강조합니다. EN IEC 60335-2-82:2022는 오락 기계 및 개인 서비스 기계의 안전성을 촉진하기 위해 필수적인 문서입니다.

The standard EN IEC 60335-2-82:2022 addresses the safety requirements for household and similar electrical appliances, specifically focusing on amusement machines and personal service machines. Its scope is well outlined, specifying that it applies to electric commercial amusement machines and personal service machines with a rated voltage not exceeding 250 V for single-phase appliances and 480 V for others. The inclusion of a variety of appliances, such as gaming machines, kiddie rides, and personal service machines, highlights the standard's extensive coverage of equipment frequently encountered in public and commercial environments. One of the strengths of this standard is its thorough consideration of common hazards faced by users and maintenance personnel, ensuring that safety is prioritized in designs and operations. By addressing typical risks associated with amusement machines and personal service machines, the standard plays a crucial role in maintaining safety standards across the industry. Moreover, EN IEC 60335-2-82:2022 represents a significant technical revision from its previous editions, reflecting an ongoing commitment to safety and compliance. Notable updates, such as clarification of inapplicable sections and the modification of normative text, enhance its clarity and applicability. The integration of references to relevant subsidiary standards ensures manufacturers and testing organizations have a comprehensive understanding of how to implement safety measures effectively. The standard also acknowledges the need for a transitional period for manufacturers and testing organizations, which is an important aspect of ensuring compliance with new requirements. It offers a realistic timeline for adjustment, which underscores its supportive role in industry adaptation and safety enhancement. Overall, EN IEC 60335-2-82:2022 is a pertinent and robust standard that reinforces the safety of amusement machines and personal service machines. It is a necessary framework for manufacturers, testing organizations, and operators who are committed to maintaining high safety standards in environments where these appliances are utilized.

La norme EN IEC 60335-2-82:2022 définit spécifiquement les exigences de sécurité pour les machines de divertissement et les machines de service personnel. Son champ d'application couvre une large gamme d'appareils, tels que les machines à sous, les simulateurs de conduite et les machines à peser, dont la tension nominale n'excède pas 250 V pour les appareils monophasés et 480 V pour d'autres types. Cette standardisation se distingue par sa focalisation sur les risques courants auxquels sont confrontés les utilisateurs et les personnel de maintenance, offrant ainsi un cadre de sécurité robuste pour les appareils de divertissement. La clarté apportée par la norme sur les spécificités techniques et les responsabilités des fabricants est un atout majeur. Particularité notable, certaines notes ont été modifiées pour devenir des textes normatifs, renforçant ainsi la rigueur des exigences. Une autre force de cette norme est son approche globale envers les machines de divertissement en établissant des exclusions adéquates, par exemple pour les appareils destinés exclusivement à des usages industriels ou en atmosphères corrosives et explosives. Ce choix de ne pas inclure ces appareils démontre une pertinence et une précision très appréciables dans le cadre de la sécurité. La mise à jour de l'édition 2022, qui remplace la version de 2002, apporte des changements techniques significatifs tout en restant en corrélation avec la norme IEC 60335-1. Cela favorise une harmonisation claire au sein des directives ISO/IEC, rendant cette norme particulièrement pertinente pour l'industrie. Enfin, la recommandation du comité concernant une période transitoire pour les fabricants et les organismes de test après la publication des nouvelles exigences souligne l'importance d'une mise en œuvre réfléchie et progressive, garantissant ainsi une adaptation fluide aux standards de sécurité pour les machines de divertissement et les machines de service personnel.

EN IEC 60335-2-82:2022は、家庭用及び類似の電気機器における安全に関する標準であり、特に娯楽機器や個人サービス機器に焦点を当てています。この標準は、商業的な娯楽機器および個人サービス機器の安全性を規定しており、単相機器の場合は最大250V、その他の機器の場合は480Vまでの定格電圧に対処しています。アミューズメントマシン、ボーリングマシン、ダーツボード、運転シミュレーター、ゲーム機、ミニライド、レーザー射撃機器、ピンボール、ビデオゲーム、個人サービス機器、貨幣再値付け機、貨幣排出機、荷物ロッカー、計測機、靴磨き機器などが含まれています。 この標準の強みは、使用者や保守担当者が直面する一般的な危険に対して実務的に対処している点です。また、特別な条件が存在する場所(腐食性または爆発性の雰囲気)での使用を意図した機器や工業用機器、家庭専用機器には適用されません。これにより、特定の用途における安全性に関する要件が明確に分かれており、用途に応じた適切な基準が確立されています。 さらに、この第三版は、2002年に発行された第二版をキャンセルし、技術的な改訂が施されています。改訂の中では、22.44が娯楽機器には適用されないことが明確化され、いくつかの備考が規範的な文に修正されています。また、IEC 60335-1の最新版とその改訂を併用することが求められており、最新の技術動向にも対応した内容となっています。 この標準は、アミューズメントマシンおよび個人サービスマシンの安全性を強化するための重要なガイドラインを提供しており、業界にとって非常に関連性の高いものであります。標準に従うことで、製品が持つ安全性を向上させ、使用者の安心が確保されることが期待されています。